• 대한조선학회논문집
• /
• 제48권2호
• /
• pp.134-140
• /
• 2011

The present paper deals with characteristics of resistance performance according to the variation of synthetic ice thickness and hull form. The resistance test has been conducted with pack ice condition in Pusan National University towing tank. Waterline angle has been chosen as a main parameter for the variation of hull form characteristics, which is the most important factor especially in icebreaking cargo vessel. The serial comparisons of resistance test have been done with the variation of hull form parameter as well as with the different thickness of synthetic ice. The different trend of resistance performances with increasing of waterline angle has been shown at each synthetic ice thickness. The present test results is expected to be confirmed by comparing the test results in ice tank in the near future.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권4호
• /
• pp.876-893
• /
• 2014

The resistance performance of an icebreaking cargo vessel according to the variation of waterline angles is investigated numerically and experimentally. A recently developed Finite Element (FE) model is used in our analysis. A resistance test with synthetic ice is performed in the towing tank at Pusan National University (PNU) to compare and validate the computed results. We demonstrate good agreement between the experimental and numerical results. Shipice interaction loads are numerically calculated based on the Fluid Structure Interaction (FSI) method in the commercial FE package LS-DYNA. Test results from model testing with synthetic ice at the PNU towing tank are used to compare and validate the numerical simulations. For each waterline angle, numerical and experimental comparisons were made for three concentrations (90%, 80%, and 60%) of pack ice. Ice was modeled as a rigid body, but the ice density was the same as that used in the experiments. A comparative study according to the variation of stem angles is expected to be conducted in the near future.

• 한국항해학회지
• /
• 제15권3호
• /
• pp.73-97
• /
• 1991

The analysis and investigation are described for White's[2] equations compared to the equations of Runeburg[3] and Milano[5] for continuous icebreaking mode, Tunik[8-1] and Ghoneim[8-2] for ramming icebreaking mode. Calculation results compare reasonably well with published model-scale and full-scale icebreaker data by Baker[1] and Dick[11]. During continuous and ramming mode operation, using characteristics of an incebreaker, down ward force on ice and standard ice thickness broken are predicted. Additionally draft, trim and extraction difficulty are also predicted. The bow part line of an icebreakin $g^{ply}$ vessel is designed aiming to maximize the ice breaking capabiltiy as following conditions-low bow angle[20 degrees] at designed waterline, small spread angle complement [6 degrees] at designed waterline, small spread angle complement [6 degrees] and high propeller thrust [220tons]. with plow, two reamers and wave type bumper.

• 대한원격탐사학회지
• /
• 제25권4호
• /
• pp.383-389
• /
• 2009

TerraSAR-X자료를 이용하여 고해상 X-밴드 SAR시스템을 이용한 조간대 갯벌 관측에의 적용 가능성을 시험하였다. 연구대상지 역은 강화도 남단과 영종도를 잇는 조간대이며, 단일편파자료와 이중편파자료를 이용하였다. 연구내용은 다음과 같은 세 가지로 분류된다. 첫째, X-밴드 영상에서의 연안의 레이더 반사도 특성 연구 및 waterline 추출 정밀도를 평가하였다. 연안지역의 waterline은 HH 편광자료의 레이더 반사도 특성을 통하여 추출하였을 때 가장 신뢰도가 높았으며, TerraSAR-X 시스템의 짧은 파장과 높은 궤도정밀도로 인하여 정밀한 지리좌표로의 변환이 가능하였다. 연구지역의 조간대 지형 경사도는 평균적으로 수평방향으로 60 m당 20 cm의 고도변화를 가지므로, TerraSAR-X HH 편광자료를 이용한 waterline 추출은 정밀한 조간대 DEM 추출로 응용될 수 있다. 둘째, 이중편파자료의 편파특성을 이용한 조간대 영생식물의 산란특성을 관측하였다. 조간대 수륙경계부에서 잘 관측되는 칠면초와 같은 염생식물은 해수면변화에 따른 조간대의 육지화 모니터링에 좋은 표적이 된다. TerraSAR-X 이중편파자료의 산란특성을 이용한 염생식물 관측결과는 2007년에 현장에서 취득된 실측자료와 비교하여 3 dB 이내의 정밀도로 일치하였다. 셋째, 단일편파자료의 레이더 간섭기법을 이용한 조간대 DEM작성을 시도하였다. 조간대 내에서 육지화가 진행된 지역은 표면에 염생식물이 발달하였음에도 불구하고 높은 간섭긴밀도를 나타내었다. 레이더 간섭기법을 통한 DEM의 제작은 일반적인 조간대에서는 적용이 제한적이며, TanDEM-X의 적용이 필요하다.

• 대한조선학회논문집
• /
• 제48권2호
• /
• pp.99-106
• /
• 2011

The appearance of CSR changes the concept of the hull form design as well as structural design, since the application of CSR inevitably brings the lightweight increase of a ship. Keeping the original design constraints such as principal particulars, deadweight, and speed performance, designers have to increase the volume of the hull form. As a result, the entrance angle at bow end should become larger, which results in blunter waterline shape. For a slow and full ship having high $C_B$ more than 0.85, a new concept of bow shape has been required to alleviate the increase of wave-making resistance, since it is very difficult to improve waterline and frameline shape for such a full ship. In this paper a new bow shape of Capesize Bulk Carrier was developed to improve its wave-making characteristics without incompliance with the design constraints. For loading manual calculation, NAPA software was used. FLUENT6.3.26 and WAVIS1.4 were used to evaluate resistance performance of the subject hull forms. The newly designed hull form was tested at SSPA model basin for the final confirmation of resistance and propulsion performance of the ship. It was found that the new bow shape of a Capesize Bulk Carrier improved the resistance characteristics greatly compared to a conventional bulbous bow. The other benefits of new bow shape on the manufacturability were also investigated.

• 대한조선학회논문집
• /
• 제46권5호
• /
• pp.471-478
• /
• 2009

The present paper deals with characteristics of resistance performance according to the variation of synthetic ice thickness and hull form. The resistance test has been conducted with pack ice condition in Pusan National University towing tank. Stem angle has been chosen as main parameters for the variation of hull form characteristics, which is the most important factor especially in icebreaking cargo vessel. The serial comparisons of resistance test have been done with the variation of hull form parameter as well as with the different thickness of synthetic ice. The different trend of resistance performances with increasing of stem angle has been shown at each synthetic ice thickness. The present test results is expected to be confirmed by comparing the test results in ice tank in the near future.

• 대한조선학회논문집
• /
• 제41권6호
• /
• pp.120-125
• /
• 2004

There are very few numbers of 115K FPP (Fixed Pitch Propulsion) Tankers for the Baltic ice class IA because the minimum power requirement of FMA (Finish- Swedish Maritime Association) needs quite large engine power and the 40 m Beam is out of calculation range of FMA minimum power requirements. The shipyard has no choice except to increase the engine power to satisfy FMA minimum power requirement Rule. And the operation cost, efficiency of hullform and its building cost are not good from the ship owners' point of view To solve this problem, the experience of ice breaking tanker development and the ice tank test results were adopted. The main idea to reduce the ice resistance is by reducing waterline angle at design load waterline. The reason behind the main idea is to reduce the ice-clearing force. Two hull forms were developed to satisfy Baltic Ice class IA. Two ice tank tests and one towing tank test was performed at MARC (Kvaener-Masa Arctic Research Center) and SSMB (Samsung Ship Model Basin) facilities, respectively. The purpose of these tests was to verify the performance in ice and open water respectively The hull form 2 shows less speed loss compared to Hull form 1 in open water operation but hull form 2 shows very good ice clearing ability. finally the Hull Form 2 satisfying Baltic ice class IA. The merit of this hull form is to use the same engine capacity and no major design changes in hull form and other related designs But the hull structure has to be changed according to the ice class grade. The difference in two hull form development methods, ice model test methods and analysis methods of ice model test will be described in this paper.

• 해양환경안전학회지
• /
• 제22권2호
• /
• pp.246-252
• /
• 2016

본 연구에서는 연안의 해저면에 누적된 퇴적오염물을 효율적으로 수거할 수 있는 저속 쌍동형 정화선에 대한 선수선형의 개념설계에 대해 수행하였다. 선형설계는 선체건조가 용이하도록 단순화하였으며, 쌍동선 선형의 선수 Water line, 선수각 등의 변화에 따른 저항성능의 영향을 검토하였다. Ansys CFX를 이용한 수치시뮬레이션과 회류수조에서의 모형시험결과와의 비교/분석 등을 통하여 선수부 선형변화에 따른 저항성능과 자유표면 유동특성 사이의 관계를 고찰하였으며, 그 결과 선수재 위치와 어깨부 체적의 선수부 이동에 따른 파형개선으로 조파저항이 감소하는 등 저항성능의 향상을 확인하였다.