• 해양환경안전학회지
• /
• 제12권2호
• /
• pp.107-113
• /
• 2006

정수장 슬러지는 수 처리 역 세척 과정에서 발생되는데, 기계적인 방법 또는 자연건조방법으로 탈수된 후 주로 해양투기, 매립등의 방법으로 처리한다. 최근에는 런던협약에 의해 해양투기가 상당히 제약을 받고 있다. 탈수된 정수장 슬러지를 위생매립장의 복토재로서의 활용가능성을 파악하기 위하여 실내실험을 통하여 정수장슬러지의 물리 화학적 특성과 지반공학적 특성을 파악하였다. 슬러지의 지반공학적 특성을 향상시키기 위하여 슬러지에 일반토사를 혼합한 시료에 비중계실험, 액 소성한계실험 비중실험, 다짐실험. 일축압측 실험등을 실시하였다. 슬러지에 일반토사를 혼합한 혼합토는 정수장슬러지와 비교하여 최대건조단위증량은 증가하고, 최적함수비는 감소하였고, 최대압축응력과 마찰각을 증가한 반면 점착력은 감소하였다. 미국환경청의 복토재 기준을 확보하기 위해서 슬러지와 일반토사를 3:7로 혼합하여야 하며, 혼합토의 압축강도는 $3.6kg/cm^2$이다.

• 한국응용과학기술학회지
• /
• 제22권4호
• /
• pp.379-384
• /
• 2005

In general, water treatment sludge (WTS) had high concentration of heavy metal, thus it made the reuse or recycling of WTS difficult. The optimal solidification conditions for maximum suppression of heavy metal elution from WTS were decided in this study. Under the optimal solidification conditions (i.e., temperature, $320^{\circ}C;$ ratio of WTS and MgO, 9:1; solidification time, 1hr), all of heavy metal including aluminum were not detected. Therefore there are no problems for reuse or recycling of WTS which was solidified under the optimal solidification conditions found in the study.

• 수도
• /
• 제24권2호통권83호
• /
• pp.28-38
• /
• 1997

• 한국환경과학회지
• /
• 제19권11호
• /
• pp.1315-1322
• /
• 2010

A membrane bioreactor (MBR) was designed using polyvinylidene fluoride(PVDF)-type hollow fiber membrane modules with a treatment capacity of 10 ton/day. A pilot plant was installed in a sewage treatment plant and was operated with an intermittent aeration method which avoids any concentration gradient of suspended solids (SS) in the MBR. For continuous operation, the pilot plant was first tested with influent (mixed liquor suspended solid:MLSS of 1000-2000 mg/L) of aeration tanks in the sewage treatment plant. The MBR was pre-treated with washing water, 10% ethanol solution, 5% NaOCl solution and finally washing water, one after another. To demonstrate the effect of the MBR on sewage treatment, compared with conventional activated sludge processes, we investigated the relationships among permeate amount (LMH), change in operation conditions, influent MLSS level and sludge production. It was found that the optimum aeration rate and suction pressure were $0.3\;m^3$/min and 30~31 cmHg, respectively. Under stable conditions in aeration, suction pressure, influent flow rate and drainage, the SS removal efficiency was more than 99.99% even when the MLSS loading rate changes. Compared with conventional activated sludge processes, the MBR was more effective in cost reduction by 27% based on permeate amount and by 51.5% on sludge production.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2004년도 학술대회지
• /
• pp.21-33
• /
• 2004

본 연구에서는 혐기성 발효조건에서 오니슬러지의 전처리에 대한 영향과 수소생산 잠새성을 평가하기 위하여 회분식 반응기를 이용하여 $35^{\circ}C$에서 혐기성 미생물을 이용하여 실험을 실시하였다. 다양한 전처리 조건의 오니슬러지를 유기원으로 이용하기 위한 실험을 실시하였다. 본 연구에서는 다양한 물리, 화학, 생물학적 오니 슬러지 가용화를 위한 전처리 기술을 개발하였으며, 실험결과 알칼리 및 기계적전처리를 통하여 원수의 상등수의 SCODcr 대비 약 15배 및 12배의 증가율을 보였으며, 이를 다시 생물학적 전처리 방법인 가수분해를 실시할 경우 다시 2배의 증가율을 보여 화학적 전처리와 생물학적 전처리를 연계할 경우가 가장 효과적인 공정임을 확인하였다. 또한 오니슬러지를 기질로 이용하여 생물학적 수소생산의 잠재성을 확인하기 위하여 전처리된 슬러지를 대상으로 수소 생산 여부를 회분식으로 실시한 결과, 완충용액을 첨가한 경우가 완충용액을 첨가하지 알은 경우에 비하여 다양한 전처리 조건에서 수소생산이 가능함을 확인하였다.

• 한국습지학회지
• /
• 제9권1호
• /
• pp.47-60
• /
• 2007

The rapid development of economy in China at the expense of consuming huge amount of energy and resources, water resource in particular, which has resulted in the production and discharge of increasing amount of wastewater to the water environment. In order to effectively control the increasing water pollution trend, the State Council has stipulated that all the cities with population over 500,000 should reach wastewater treatment rate of 60% by 2005, and all the cities should reach the rate of 60% by 2010, of which Capital Beijing and all the province capital cities and important tourism cities should reach 70% then. By the end of 2005, of the 661 cities in China, 393 have built and operated municipal wastewater treatments with a total number of 790 sets, total treatment capacity of $80.91{\times}106m^3/d$ and total treatment rate of > 48%. Other 73 cities have started the construction of municipal wastewater treatment plants, and other 168 cities have started to prepare, planning and design of wastewater treatment plants. Most of municipal wastewater treatment plants in big cities in China operate normally and perform well with good quality of effluent in terms of wastewater treatment train, but the sewage sludge treatment is usually poor with big problems. It has been found that the small scale WWTPs using activated sludge process in the towns are usually operated and maintained abnormally because of lack of fund, skilled operators and energy. It is therefore suggested that the small scale MWWTPs in small cities and towns adopt appropriate technologies, of which the most available ones are multi-stage ponds, constructed wetlands and the combination of them for further purification and reuse of treated wastewater.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제8권5호
• /
• pp.294-298
• /
• 2003

Endocrine-disrupting phenolic compounds in the water were degraded by laccase from Trametes sp. followed by activated sludge treatment. The effect of temperature on the degradation of phenolic compounds and the production of organic compounds were investigated using endocrine-disrupting chemicals such as bisphenol A, 2.4-dichlorophenol, and diethyl phthalate. Bisphenol A and 2.4-dichlorophenol disappeared completely after the laccase treatment, but no disappearance of diethyl phthalate was observed. The Michaelis-Menten type equation was proposed to represent the degradation rate of bisphenol A by the lacasse under various temperatures. After the laccase treatment of endocrine-disrupting chemicals, the activated sludge treatment was attempted and it could convert about 85 and 75% of organic compounds produced from bisphenol A and 2.4-dichlorophenol into H$_2$O and CO$_2$, respectively.

• 한국물환경학회지
• /
• 제37권1호
• /
• pp.47-54
• /
• 2021

Aerobic granular sludge (AGS) can be classified as a type of self-immobilized microbial aggregates measuring more than 0.2 mm. It offers the option to simultaneously remove COD, N, and P that occur in different zones inside a granule. Also, AGS is characterized by high precipitability, treatability with high organic loading, and high tolerance to low temperature. In this study, a sequencing batch reactor inoculated with AGS (AGS-SBR) is a new advanced wastewater treatment process that was proven to grow AGS with integrated nutrient removal and low C/N ratio. A pilot plant, AGS-SBR with a capacity of 225 ㎥/d was installed at an S sewage treatment plant in Gyeonggi-do. The results of the operation showed that the water quality of the effluent indicated that the value of BOD5 was 1.5 mg/L, CODMn was 11.4 mg/L, SS was 6.2 mg/L, T-N was 13.2 mg/L, and T-P was 0.197 mg/L, and all of these values reliably satisfied an effluent standard (I Area). In winter, the T-N treatment efficiency at a lower temperature of less than 11℃ also showed reliability to meet the effluent standard of the I Area (20 mg/L or less). Analysis of microbial community in AGS showed a higher preponderance of beneficial microorganisms involved in denitrification and phosphorus accumulation compared with activated sludge. The power consumption and sludge disposal cost were reduced by 34.7% and 54.9%, respectively, compared to the domestic SBR type sewage treatment plant with a processing capacity of 1,000 ㎥/d or less.

• 한국유체기계학회 논문집
• /
• 제8권2호
• /
• pp.16-22
• /
• 2005

This research inspects the discharge state for inside of sedimentation basin, and, through the aboard literature and data, examine sedimentation sludge about discharge plan of effective sedimentation sludge that can discharge in state of high concentration. In this study, we are going to attempt an economy with improvement efficiency for discharge of sedimentation sludge in a water treatment plant.

• 상하수도학회지
• /
• 제22권6호
• /
• pp.627-632
• /
• 2008

It is necessary to investigate methods for improvement by diagnosing sludge settling characteristics on inflow of slurry to thickener. The results of the settling tests are correlated to determine zone settling velocities at the various sludge solids concentrations. Conditioning of WTP residuals is generally done by either chemical or physical treatment. The settling test was conducted with 1m columns dosing polymer to WTP residuals at various solids concentration. The estimated results for dosing to WTP residuals for a sludge of 2,100 ~ 16,012 mg/L solids concentration were the zone settling velocities of 48.38 ~ 6.8 m/day, supernatant solid concentration of 3.2 ~ 19 mg/L and solid flux of $101.6{\sim}317.61kg/m^3{\cdot}day$. The values for non-polymer treatment were the zone settling velocities of 28.37 ~ 0.12 m/day, supernatent solid concentration of 8.5 ~ 108 mg/L and solid flux of $59.58{\sim}1.92kg/m^2{\cdot}day$. The limiting solid flux value by Yoshioka methods was $4.0kg\;TS/m^3{\cdot}day$ for Non-polymer and $228.0kg\;TS/m^3{\cdot}day$ for dosing polymer. These results are to indicate a possibility of improvement on the thickening characteristics and the quality of supernatant as increasing the settling velocities by dosing polymer to WTP residuals.