• 제목/요약/키워드: Water-soluble surfactant

검색결과 64건 처리시간 0.024초

Trioctylphosphine Oxide와 Thenoyltrifluoroacetone의 농도가 콜로이드 액상 에이프런의 제조와 안정성에 미치는 영향 (Effect of Concentration of Trioctylphosphine Oxide and Thenoyltrifluoroacetone on the Preparation and Stability of Colloidal Liquid Aphrons)

  • 여길환;전상준;홍원희;이홍기
    • 청정기술
    • /
    • 제12권1호
    • /
    • pp.45-51
    • /
    • 2006
  • 콜로이드 액상 에이프런(CLA)은 무극성 탄화수소나 알콜, 아민등을 용매로 사용하여 만들 수 있다. 본 실험에서 수행한 CLA의 제조 및 안정성 실험은 수용성 계면활성제와 지용성 계면활성제를 이용하였다. 본 연구에서는 CLA를 제조할 때 사용되는 두 가지 계면활성제의 비율과 추출제의 농도에 따른 콜로이드 액상 에이프런의 안정성을 살펴보았다. 두 가지 계면활성제의 비율(PVR: phase volume ratio)이 변화함에 따라 콜로이드 액상 에이프런의 안정성에 영향을 주었다. 추출제의 농도가 증가할수록 CLA의 안정도는 감소하며, PVR의 값이 높아질수록 CLA의 안정도는 감소한다.

  • PDF

수용성 규산나트륨의 물리 · 화학적 특성 (Physical and Chemical Properties of Soluble Sodium Silicate)

  • 하윤식;박경일;서무룡
    • 대한화학회지
    • /
    • 제43권2호
    • /
    • pp.172-181
    • /
    • 1999
  • 수용성 규산나트륨 빌더를 개발하기 위하여 물유리와 수산화나륨을 적정비율로 혼합한 후 메탄올에 분산시켜 $SiO_2/Na_2O$의 몰 비율이 2.4∼2.8인 무정형 규산나트륨 고체분말을 제조하였다. 이때 규산나트륨의 $SiO_2/Na_2O$의 몰비, 용해도, thermogram, SEM, BET 등을 통하여 그 물리적 특성을 조사하였으며 빌더로서의 기본적인 특성을 규명하기 위해 $SiO_2/Na_2O$의 몰비가 1.0, 2.4, 2.8인 규산나트륨 빌더와 제올라이트를 사용하여 pH 유지능력, 온도에 따른 칼슘이온 결합능, 계면활성제 흡착능 등을 조사하였다. 그 결과 수용성 규산나트륨 화합물이 세제용빌더로서 가져야할 특성인 pH 유지능력 및 용해도에 있어서 제올라이트 보다 우수한 성능을 나타냈으나 칼슘이온 결합능 및 계면활성제 흡착능은 낮게 나타났으며, 규산나트륨의 $SiO_2/Na_2O$의 비율이 증가할수록 pH 유지능력과 이온교환능력은 감소하지만 계면활성제 흡착능력은 다소 증가함을 알 수 있었다.

  • PDF

천연 밀단백질/계면활성제 복합체의 세정에 있어 피부보호 (The Cutaneous Protection for Detergent Formulation of Nature Wheat Protein Surfactant Complexes)

  • 정환경;박흥조;김명수;남기대
    • 한국응용과학기술학회지
    • /
    • 제19권2호
    • /
    • pp.79-85
    • /
    • 2002
  • The cutaneous tolerability of detergent formulations can be improved by means of suitable additives. They complex the surfactant molecules lowering the concentration of their free monomeric species. Proteins derivatives used as additives for detergency are usually prepared by partial hydrolysis of plant reserve proteins. The main purpose of the hydrolytic cleavage is to make them water soluble and suitable for liquid products. Water solubility and stability are obtained by means of complexation with surfactants which also increase their actual hydrophobicity, an important parameter affecting cosmetic properties of proteins. Transepidermal water loss (TEWL) and electric capacitance (EC) have been adopted as investigation technigues to evaluate the skin integrity/damage in vitro tests, The performance of native wheat protein / surfactant complexes has been compared with traditional protein hydrolysates as detergent additives. The results show a noticeable reduction of skin irritation in surfactant formulations with addition of native wheat protein.

Surface-attached Solid Dispersion

  • Park, Young-Joon;Oh, Dong-Hoon;Yan, Yi-Dong;Seo, Yoon-Gee;Lee, Sung-Neug;Choi, Han-Gon;Yong, Chul-Soon
    • Journal of Pharmaceutical Investigation
    • /
    • 제40권spc호
    • /
    • pp.97-102
    • /
    • 2010
  • A novel surface-attached solid dispersion is designed to improve the solubility and oral bioavailability of poorly water-soluble drugs without crystalline change. Accordingly, it draws increasing interest because of excellent stability and no pollution for accomplishing enhanced solubility and bioavailability, which have recently been highlighted in connection with a number of higher value-added poorly water-soluble drugs. In addition, excellent stability can be attained when the poorly water-soluble drugs are not dissolved but dispersed in water and provide no crystallinity change. This solid dispersion is given by means of attaching the dissolved carriers such as hydrophilic polymer and surfactant to the surface of dispersed drug particles followed by changing the hydrophobic drug to hydrophilic form. The aim of the present review is to outline the preparation, physicochemical property and bioavailability of novel surface-attached solid dispersion with improved solubility and bioavailability of poorly water-soluble drugs without crystalline change.

SMEDDS를 이용한 난용성 약물의 용출율 향상 (Improvement of Dissolution Rate of Poorly Water Soluble Drug Using Self-microemulsifying Drug Delivery System)

  • 김계현;이윤석;배준호;지상철;박은석
    • Journal of Pharmaceutical Investigation
    • /
    • 제29권1호
    • /
    • pp.37-45
    • /
    • 1999
  • ABSTRACT-A self-microemulsifying drug delivery system (SMEDDS) was developed to enhance the solubility and dissolution rate of poorly water soluble drug, biphenyl dimethyl dicarboxylate, DDB. The system was optimized by evaluating the solubility of DDB and the microemulsion existence range after the preparation of microemulsions with varying compositions of triacetin and surfactant-cosurfactant mixtures (Labrasol as surfactant (S) and the combination of Transcutol, Cremophor RH 40 and Plurol oleique as cosurfactant (CoS)). SMEDDS in this study markedly improved the solubility of DDB in water up to 10 mg/ml and the size of the o/w microemulsion droplets measured by dynamic light scattering showed a narrow monodisperse size distribution with an average diameter less than 50 nm. The microemulsion existing range is increased proportional to the ratio of S/CoS, however, it decreased remarkably as the oil content was more than 20%. In vitro dissolution study of SMEDDS showed a significantly increased dissolution rate of DDB in water (> 12 fold over DDB powder), and SMEDDS also had significantly greater permeability of DDB in Caco-2 cell compared to powders.

  • PDF

Precipitation, Resolubilization and Luminescent Properties of Tris (2,2$^\prime$-diimine)Ruthenium(II) Complexes in Premicellar Anionic Surfactant Solutions

  • Park, Joon-Woo;Kim, Sung-Hee
    • Bulletin of the Korean Chemical Society
    • /
    • 제9권5호
    • /
    • pp.317-322
    • /
    • 1988
  • Premicellar precipitation, resolubilization and luminescing behaviors of $RuL_3^{2+}$ (L = bpy, phen, $Me_2bpy$) in aqueous alkylsulfate and sulfonate solutions were studied. Addition of the anionic surfactants to $RuL_3\;^{2+}$ solutions caused initial precipitation which was redissolved by further addition of the surfactants. The apparent solubility products $K_{sp}$'s of the precipitates were evaluated assuming 1:2 salt formation. The values were smaller as the ligand is more hydrophobic and the length of hydrocarbon chain of the surfactant is longer. The $K_{sp}$ values for L = bpy were constant over wide surfactant concentration range. However, those for L = $Me_2bpy$ and also for phen, but to less extent, increased with the surfactant concentration. The resolubilization of 1:2 salts was followed by red-shift of emission band and extensive emission quenching above critical concentration of the surfactants. The critical concentration was lower for more hydrophobic surfactant. For L = $Me_2bpy$, the blue-shifted emission band with enhanced emission intensity was observed in intermediate surfactant concentration region. The high ionic strength of media prevented the precipitate formation, but facilitated the red-shift of the emission bands. The results support that the precipitate is dissolved by accretion of surfactant anions to the salts to form water-soluble surfactant-rich $RuL_3$-surfactant anionic species. These species appeared to aggregate cooperatively to produce large clusters which exhibited the red-shifted emission.

Ultrafiltration of Oily Wastewater with Surface Pretreated Membranes

  • Kim, Kyu-Jin;Fane, Antony G.
    • Korean Membrane Journal
    • /
    • 제1권1호
    • /
    • pp.43-49
    • /
    • 1999
  • Separation of soluble oil was investigated during filtration of cutting oil emulsion using various commercial ultrafiltration membranes. The surface properties of membranes used were hydrophilic hydrophobic and modified surfaces by various surfactant pretreatments. Conditions varied include stirring speed transmeembrane pressure membrane type and surfactant type for pretreatment. The results give some indication of mechanisms occurring at the membrane surface. Surfactant pretreatments significantly improved water flux and UF flux of hydrophilic regenerated cellulose(up to 2.4x for YM100) and hydrophobic polysulfone (up to 2.2x for PTHK) membranes depending on surfactant type and operating conditions. The UF flux enhancement was attributed to membrane swelling and reduction of interfacial surface tension between oil droplets and membrane surface. unexpectedly the hydrophilic membranes revealed greater flux enhancement than the hydrophobic membranes. The results also showed a greater improvement in UF flux at lower operating pressure.

  • PDF

유아용 종합비타민 액제의 제제 설계 (Formulation of Multivitamin Solutions for Infants)

  • 홍지웅;박은석;지상철
    • 약학회지
    • /
    • 제40권3호
    • /
    • pp.243-250
    • /
    • 1996
  • In order to formulate aqueous multivitamin solutions containing both oil-soluble (A, D, E) and water-soluble vitmains ($B_1,\;B_2,\;B_6,\;B_{12}$, C and niacinamide) in 1ml-dose, the effects of various additives such as cosolvents (propylene glycol, polyethylene glycol, glycerin), a sweetener (sorbitol) and a surfactant (Cremophor$^{\circledR}$ RH40) on the solubility of oil-soluble vitamins in water were evaluated. Cremophor$^{\circledR}$ RH40 showed the excellent capacity on the solubilization of oil-soluble vitamins, and the simultaneous addition of cosolvents and surfactant resulted in synergetic effects on the solubilization of oil-soluble vitamins. The effects of the combination of the cosolvents and sweetener on the stability of multivitamin solutions were also evaluated by determining the amount of vitmain A and $B_1$ remained in the solutions after storing at $40^{\circ}C$ for 9 weeks. The formulation consisting of Cremophor$^{\circledR}$ RH40 15%, PG 20%, and sorbitol 20% resulted in the best stability of vitamin A and $B_1$. The stability of vitamin A and $B_1$ in this formulation was evaluated at 50, 60, and $70^{\circ}C$ up to 40 days. The shelf-lives of vitamin A and $B_1$ in the formulation, calculated using the Arrhenius equation, were 1,521 days and 475 days at $20^{\circ}C$, respectively.

  • PDF

N-(2,3-dihydroxypropyl)-N,N-dimethyldodecane-1-amine chloride의 합성과 평가 (Synthesis and Evaluation of N-(2,3-dihydroxypropyl)-N,N-dimethyldodecane-1-amine chloride)

  • 조완구;최정진
    • 한국응용과학기술학회지
    • /
    • 제25권1호
    • /
    • pp.23-31
    • /
    • 2008
  • In general, anionic and cationic surfactants are incompatible because their mixtures form insoluble complexes. There are, however, some complexes that are soluble and behave like regular surfactants, specifically like nonionic surfactants, thus named pseudo-nonionic surfactant complexes. Pseudo-nonionic complexes are more effective and efficient than their ionic surfactant components as shown by their equilibrium and dynamic surface tensions and interfacial tensions. They pack at the interface more than their ionic components. Since, pseudo-nonionic complexes show their own characteristics, they can be treated as separate classes of surfactants distinct from ionic and nonionic surfactants. Novel cationic surfactant was synthesized, having the polyhydroxyl group at the head group. We found that aqueous mixtures of our cationic surfactant and usual anionic surfactant(SDS) could form homogeneous solutions even at high concentration. The properties of mixed surfactant solutions were measured. Foam stability, CMC(critical micelle concentration), water hardness tolerance and thickening effect were tested. The foam stability of mixed surfactants was very good and various synergy effects were observed.

콜라겐 수용액을 함유하는 역미셀의 제조 및 립 제품에 응용 (The Preparation of Reversed Micelle Containing Water Soluble Collagen Solution and Their Application on Lip Make up Products)

  • 김영호;정은지;이동원;이상길;표형배
    • 대한화장품학회지
    • /
    • 제39권4호
    • /
    • pp.271-279
    • /
    • 2013
  • 립스틱의 보습력을 개선하기 위해 수용성 콜라겐(30 wt%)을 역미셀 방법으로 립스틱의 유상 내에 포접하였다. 콜라겐을 포함하는 역미셀은 외부상으로서 caprylic/capric triglyceride와 계면활성제인 polyoxyethylene(10) octylphenyl ether (Triton X-100)와 보조계면활성제로 aliphatic alcohol인 1-dodecanol을 이용하여 제조되었다. 콜라겐을 포접하는 역미셀의 형성 조건은 전기전도도와 methylene blue (MB)를 이용한 UV-vis spectrum을 통해 확인하였고, 콜라겐 포접체를 함유하는 역미셀의 립스틱에서 안정성 및 보습력은 레올로지 측정, 수분량 측정 및 아미노산 정량을 통해 확인하였다. 물과 계면활성제의 농도비인 W (water-pool), [$H_2O$]/[Triton X-100]는 10이하에서 안정한 역미셀이 형성되었다. 20 wt%의 콜라겐 포접 역미셀을 함유한 립스틱은 역미셀을 함유하지 않은 립스틱과 경도에서 큰 차이없이 안정하였으며, 수분량은 59%까지 개선되었고, 아미노산 함량은 92.7%였다.