• Advances in concrete construction
• /
• 제7권3호
• /
• pp.175-181
• /
• 2019

Low-calcium fly ash (LCFA) were used to prepare cement/LCFA specimens in this study. The basic physical properties including water demand, fluidity, setting time, soundness and drying shrinkage of cement/LCFA paste were investigated. The effects of curing time, immersion time and wet-dry cycles in 3% $Na_2SO_4$ solution on the compressive strength and the microstructures of specimens were also discussed. The results show that LCFA increases the water demand, setting time, soundness of cement paste samples. 50% and 60% LCFA replacement ratio decrease the drying shrinkage of hardened cement paste. The compressive strength of plain cement specimens decreases at the later immersion stage in 3% $Na_2SO_4$ solution. The addition of LCFA can decrease this strength reduction of cement specimens. For all specimens with LCFA, the compressive strength increases with increasing immersion time. During the wet-dry cycles, the compressive strength of plain cement specimens decreases with increasing wet-dry cycles. However, the pores in the specimens with 30% and 40% LCFA at early ages could be large enough for the crystal of sodium sulfate, which leads to the compressive strength increase with the increase of wet-dry cycles in 3% $Na_2SO_4$ solution. The microstructures of cement/LCFA specimens are in good agreement with the compressive strength.

• 한국콘텐츠학회논문지
• /
• 제9권1호
• /
• pp.285-292
• /
• 2009

본 연구는 온열요법, 그 중 습열(moist heat)과 건열(dry heat)의 적용이 면역 활성의 변동에 미치는 효과를 알아보기 위한 것이다. 건강에 이상이 없는 연령 23${\sim}$32세, 신장 171.0${\pm}$1.2cm, 체중 68.0${\pm}$2.2kg의 남성 15명과 연령 22${\sim}$24세, 신장 159.5${\pm}$1.2cm, 체중 54.6${\pm}$2.4kg의 여성 15명을 대상으로 인체에 온열침수 (핫팩(KRS 12P, Karis Co., Korea))와 적외선 (발광 적외선등(Infrared, Ilshin Co., Korea))을 적용하여 보체와 같은 면역-활성 물질의 추이를 살펴보았다. 연구의 결과로써, 온열침수와 적외선을 적용한 결과 온열침수와 적외선 적용으로 보체 성분의 변동은 온열침수 적용으로 C1q의 유의한 감소와 C3(여성의 경우) 및 C4의 감소가 나타남을 확인할 수 있었다. 그러나 적외선의 경우 C1q와 C3 및 C4의 증감에 별다른 영향을 미치지 못하였다. 이러한 연구의 결과로 미루어 온열침수의 적용으로 보체계의 활성을 확인할 수 있었으며 이러한 면역-활성의 증가는 선택적 경로(alternative pathway)가 아닌 고전적 경로(classical pathway)를 통해 이루어짐을 추정할 수 있었다. 따라서 본 연구의 결과는 극히 부분적 결과를 나타내지만, 온열침수와 적외선 적용으로 면역-증강효과가 다소 존재하는 것으로 사료된다.

• Journal of Nutrition and Health
• /
• 제28권4호
• /
• pp.291-297
• /
• 1995

This study aimed to verify the nutritional and curative effects of protein hydroysate in rats model with gastric ulcer induced by restraint and water-immersion stress. Sprague-Dawley, famale rats weighing approximtely 200g were forced in 5$\times$5$\times$15cm plexiglas cage. The restraint and water immersion stress was carried at 20$\pm$2$^{\circ}C$ for 8-hours. After stress 4 kinds of diets(10% casein, 20% casein, 10% casein hydrolysate, 20% casein hydrolysate) were given for 5 days. In the gastric ulcer rats model, the growth, gastric emptying rate, trypsin activity in gastrointestinal content, plasma total protein, albumin, $\alpha$-amino-N, UUN, creatinine and hydroxyproline of the urine and nitrogen retention were analyzed for nutritional effects of dietary nitrogen levels(10%, 20%) and sources (casein, casein hydrolysate). The results were as follows ; In gastric ulcer rats model, severeness of ulcer, plasma protein, gastric emptying rate, nitrogen retention rate were not different between 20% casein-fed group and 20% casein hydrolysatefed group. But 10% casein hydrolysate-fed group had more curative group. The casein hydrolysate diet-fed group was lower trysin activity in small intestianl content than the casein-fed group, at both casein level(10%, 20%). Finally at 20% levels, there was no difference between casein and casein hydrolysate diet, but 10% level, casein hydrolysate diet was more curative of ulcer than casein diet in gastric ulcer rat model. The results of this study provide useful information concerning diet therapy for the patients with gastrointestinal diseases and the field of enteral diet materials.

• 대한치과보철학회지
• /
• 제39권3호
• /
• pp.250-259
• /
• 2001

Since the late 1930s, acrylic resins have been the materials of choice for the fabrication of complete denture bases. It has excellent esthetic properties, adequate strength, low water sorption, and low solubility. But acrylic resin has disadvantage of processing shrinkage that reduces denture retention and accuracy of denture occlusion. Metals also have been used in denture base material. Metals used in denture bases display excellent strength and dimensional stability. The major disadvantages associated with metal denture bases include increased cost, difficulty in fabrication, compromised esthetic qualities, and inability to re-base. The purpose of this study is to compare the artificial tooth movements of complete dentures with resin bases and metal bases after curing, deflasking, polishing immersion in water for 1 week and 4 weeks. Twenty-four maxillary complete resin denture bases with artificial teeth were fabricated. Twelve of them were resin based and other twelve of them were metal based. Fine crosses were marked on the incisal edges of right central incisors and distobuccal cusps of be second molars. Measurements were done for the changes of distances of reference points at the time of wax denture, after deflasking after decasting after polishing after immersion in water for 1 week and 4 weeks Meaurements were done to the accuracy of 0.001mm with a measuring microscope. The results were as follows : 1. Metal base showed significantly less tooth movement than resin base after curing and decasting (p<0.01). 2. Metal base showed significantly less tooth movement than resin base after polishing (p<0.01). 3. After immersion in water for 1 week and 4 weeks, metal base showed less movement than resin base. Difference was significant for anterior-posterior distances (p<0.01), but not significant for molar-to-molar distance (p>0.01). 4. 1 week and 4 weeks of immersion failed to compensate the initial processing shrinkage of metal and resin bases (p>0.01).

• The Journal of Advanced Prosthodontics
• /
• 제11권2호
• /
• pp.128-137
• /
• 2019

PURPOSE. The aim of this study was to compare the effect of different finishing and polishing techniques on water absorption, water solubility, and microhardness of ceramic or glass-polymer based computer-aided design and computer-aided manufacturing (CAD/CAM) materials following thermocycling. MATERIALS AND METHODS. 150 disc-shaped specimens were prepared from three different hybrid materials and divided into five subgroups according to the applied surface polishing techniques. All specimens were subjected up to #4000 grit SiC paper grinding. No additional polishing has been done to the control group (Group I). Other polishing procedures were as follows: Group II: two-stage diamond impregnated polishing discs; Group III: yellow colored rubber based silicone discs; Group IV: diamond polishing paste; and Group V: Aluminum oxide polishing discs. Subsequently, 5000-cycles of thermocycling were applied. The analyses were conducted after 24 hours, 7 days, and 30 days of water immersion. Water absorption and water solubility results were analyzed by two-way ANOVA and Tukey post-hoc tests. Besides, microhardness data were compared by Kruskal-Wallis and MannWhitney U tests (P<.05). RESULTS. Surface polishing procedures had significant effects on water absorption and solubility and surface microhardness of resin ceramics (P<.05). Group IV exhibited the lowest water absorption and the highest microhardness values (P<.05). Immersion periods had no effect on the microhardness of hybrid ceramic materials (P>.05). CONCLUSION. Surface finishing and polishing procedures might negatively affect physical properties of hybrid ceramic materials. Nevertheless, immersion periods do not affect the microhardness of the materials. Final polishing by using diamond polishing paste can be recommended for all CAD/CAM materials.

• 한국식품저장유통학회지
• /
• 제6권4호
• /
• pp.417-423
• /
• 1999

쑥갓과 케일을 시료 중량 50배의 5$^{\circ}C$로 냉각한 전해산화수에 2분 3회 다단침지 처리한 후 저장중의 품질변화를 조사한 결과, 쑥갓의 경우 총균수는 무처리 쑥갓에 비해 평균 1/130, 대장균군수는 평균 1/1,170, 케일의 경우 총균수는 무처리 케일에 비해 평균 1/870, 대장균구수는 평균 1/470 수준으로 감소하였으나 1$0^{\circ}C$ 저장 6일후 부터는 무처리, 수도수 침지 처리구와 유사한 수준으로 증가하였다. 저장중 중량감소율은 쑥갓과 케일 모두 저장 3일까지는 무처리구에 비해 낮은 감소율을, 그리고 저장 3일 이후부터 무처리구에 비해 다소 높은 중량감소율을 나타내었다. 한편 폐기율은 전해산화수로 침지한 쑥갓과 케일이 저장 6일까지는 무처리와 수도수 침지구에 비해 낮은 값을 나타내었다. 케일의 경우 rupture srenth 는 저장 초기에는 무처리와 수도수 침지 처리구에 비해 높은 값을 나타내었으나 저장기간 동안에는 유사한 경향을 나타내었다. 저장중 색도는 쑥갓과 케일 모두 저장 초기부터 무처리구보다는 수도수 침지구가, 수도수 침지구보다는 전해산화수 처리구가 다소 높은 L, b값과 낮은 a값을 나타내었으며, 클로로필 함량 변화도 쑥갓과 케일 모두 침지 직후에는 전해 산화수로 침지한 처리구가 다소 적은 값을 나타내었으나 저장 3일부터 무처리구, 수도수처리구, 전해산화수 처리구의 순으로 감소속도가 빨랐다. 저장기간 중 관능적인 특성도 저장기간 전반에 걸쳐 쑥갓과 케일 모두 변색, 조위, 폐기율, 종합적 기호도에서 무처리와 수도수 처리구에 비해 다소 높은 점수를 나타내었다.

• 대한치과교정학회지
• /
• 제28권5호
• /
• pp.783-789
• /
• 1998

본 연구는 침수후 시간경과에 따른 교정용 레진접착제의 전단결합강도 변화를 비교연구하고 파절양상을 평가하기 위하여 시행되었다. 건전한 제1소구치를 포매하여 만든 시편에 화학중합형 레진접착제인 $Concise^{\circledR}$와 광중합형 레진접착제인 $Transbond^{\circledR}$를 이용하여 금속 브라켓을 부착하고 $37^{\circ}C$ 증류수에 1일, 1주일, 1개월, 3개월, 6개월 동안 침수시킨 후 전단결합강도를 측정하고 파절양상을 관찰하여 다음과 같은 결론을 얻었다. 1. 침수시간에 따른 전단결합강도 비교시 Concise군과 Transbond군 모두에서 6개월의 결합강도가 1일, 1주, 1개월에 비해 유의성있게 높았으며(p<0.05) 상관검정 결과 침수시간이 증가할수록 전단결합강도가 증가하는 것으로 나타났다(p<0.01). 2. Concise군과 Transbond군간의 전단결합강도 비교에서는 유의한 차이가 없었다. 3. 접착제 잔류지수를 통하여 파절양상을 비교 관찰한 결과 브라켓 기저부와 접착제 경계부에서의 탈락이 가장 많았으며 침수시간에 따른 접착제 잔류지수간에 유의한 차이는 없었다.

• 한국응용과학기술학회지
• /
• 제40권4호
• /
• pp.761-772
• /
• 2023

본 연구의 목적은 남자 대학 엘리트 조정선수의 2000 m 로잉 에르고미터 수행 후 저온침수 처치를 통해 혈중 젖산, LDH, MDA 및 SOD의 변화에 긍정적인 영향을 주어 피로 회복에 미치는 영향을 구명하는 데 있다. 이에 남자 대학 엘리트 조정선수 10명을 대상으로 고강도 로잉 에르고미터 2,000 m 수행 후 비 처치와 저온 침수 처치의 효과를 비교하였다. 측정 변인들에 대한 결과를 검증하기 위해 처치 및 시기 간 상호작용 효과를 분석하기 위해 ANOVA를 실시하였고 각 항목별 유의수준 .05로 설정하여 다음의 결과를 도출하였다. 젖산은 시기 간 주효과가 나타났고(p<.001) 그룹 내 시기별 차이가 났다(p<.001). 또한, LDH는 그룹 내 시기별 차이가 나타났다(p<.05). MDA는 그룹×시기 간 상호작용 효과가 나타났고(p<.05), 그룹 간(p<.05), 시기 간(p<.001) 주효과가 나타났다. SOD는 그룹 간, 시기 주효과가 나타났고(p<.05) 회복 30분 후 그룹 간 차이가 나타났다(p<.05). 이를 종합해 볼 때, 본 연구에서 실시한 저온침수 처치가 조정 선수의 혈중 피로 물질, 활성산소 및 항산화 효소에 유의한 효과를 나타냈다. 따라서 운동선수의 고강도 훈련 후 저온침수를 적극 활용할 것을 권장한다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.889-901
• /
• 2021

The tension of cables and motion response significantly affect safety of an immersed tunnel element in the immersion process. To investigate those, a hydrodynamic scale-model test was carried out and the model experiments was conducted under wind, current and wave loads simultaneously. The immersion standby (the process that the position of the immersed tunnel element should be located before the immersion process) and immersion process conditions have been conducted and illustrated. At the immersion standby conditions, the maximum force of the cables and motion is much larger at the side of incoming wind, wave and current, the maximum force of Element-6 (6 cables directly tie on the element) is larger than for Pontoon-8 (8 cables tie on pontoon of the element), and the flexible connection can reduce the maximum force of the mooring cables and motion of element (i.e. sway is expecting to decrease approximate 40%). The maximum force of the mooring cables increases with the increase of current speed, wave height, and water depth. The motion of immersed tunnel element increases with increase of wave height and water depth, and the current speed had little effect on it. At the immersion process condition, the maximum force of the cables decrease with the increase of immersion depth, and dramatically increase with the increase of wave height (i.e. the tension of cable F4 of pontoons at wave height of 1.5 m (83.3t) is approximately four times that at wave height of 0.8 m). The current speed has no much effect on the maximum force of the cables. The weight has little effect on the maximum force of the mooring cables, and the maximum force of hoisting cables increase with the increase of weight. The maximum value of six-freedom motion amplitude of the immersed tunnel element decreases with the increase of immersion depth, increase with the increase of current speed and wave height (i.e. the roll motion at wave height of 1.5 m is two times that at wave height of 0.8 m). The weight has little effect on the maximum motion amplitude of the immersed tunnel element. The results are significant for the immersion safety of element in engineering practical construction process.

• 한국식품영양과학회지
• /
• 제3권1호
• /
• pp.35-41
• /
• 1974

The experiment attempted to detect the loss of mineral substances in the crude herb, especially for the Platycodon graucum Nakai after removal of its acrid flavor. The results obtained are summarized as follows: 1. The quantity of the mineral substance was K Ca P Mg and Na in orders. The above substances were more prevalent in the part of the plant above the ground than the plant below the ground, however Na remained the same in both parts of the plant. 2. As a result of water immersion, in order to clear away the acrid flavor, the one day exudate showed that K was highest in amount and in the others there was no significant difference. There was a slight increase, however, in the amount of Ca K Mg P and Na because of exudation on the 3rd and 5 th days. 3. The amount of the exudate was increased by boiling rather than simple water immersion, but the amount of Ca was decreased.