• Journal of the Korean Wood Science and Technology
• /
• v.35 no.1
• /
• pp.73-80
• /
• 2007

This study was carried out to separate the heavy toxic metals in eco-building materials by low-temperature pyrolysis, especially arsenic (As) compounds in CCA wood preservative as a solid in char. The pyrolysis was carried out to heat the CCA-treated Hemlock at $280^{\circ}C$, $300^{\circ}C$, $320^{\circ}C$, and $340^{\circ}C$ for 60 mins. Laboratory scale pyrolyzer composed of [preheater$\rightarrow$pyrolyzer$\rightarrow$1st water scrubber$\rightarrow$2nd bubbling flask with 1% $HNO_3$ solution$\rightarrow$vent], and was operated to absorb the volatile metal compound particulates at the primary water scrubber and the secondary nitric acid bubbling flask with cooling condenser of $4^{\circ}C$ under nitrogen stream of 20 mL/min flow rate. And the contents of copper, chromium and arsenic compounds in its pyrolysis such as carbonized CCA treated wood, 1st washing and 2nd washing liquors as well as its raw materials, were determined using ICP-AES. The results are as follows : 1. The yield of char in low-temperature pyrolysis reached about 50 percentage similar to the result of common pyrolytic process. 2. The higher the pyrolytic temperature was, the more the volatiles of CCA, and in particular, the arsenic compounds were to be further more volatile above $320^{\circ}C$, even though the more repetitive and sequential monitorings were necessary. 3. More than 85 percentage of CCA in CCA-treated wood was left in char in such low-temperature pyrolytic condition at $300^{\circ}C$. 4. Washing system for absorption of volatile CCA in this experiment required much more contacting time between volatile gases and water to prevent the loss of CCA compounds, especially the loss of arsenic compound. 5. Therefore, more complete recovery of CCA components in CCA-treated wood required the lower temperature than $320^{\circ}C$, and the longer contacting time of volatile gases and water needed the special washing and recovery system to separate the toxic and volatile arsenic compounds in vent gases.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.15 no.1
• /
• pp.198-218
• /
• 2002

On the basis of Imjeungjinamuian(臨證指南醫案), authors investigated the pathogenesis and treatment of ophthalmotolaryngobgic diseases from the viewpoint of Onbyeong(溫病). 1. The symptoms and diseases investigated according to department were as follows;. 1) Ophthalmology : blepharitis, blepharedema, lacrimal hypersecretion, hyperemia, ophthalmalgla, photopsia, visual disturbance, mydriasis 2) Otology : full-feeling, otorrhea, otalgla, mastoiditis, tinnitus, hearing disturbance, vertigo 3) Rhinology : rhinorrhea, nasal obstruction, sinusitis, epistaxis 4) Laryngology : sore throat, hoarseness 5) The Others : headache, cough, asthma 2. The pathogenesis and treatment of ophthalmotolaryngologic diseases were as follows. 1) When the pathogenesis of hyperemia, otorrhea, otalgia, mastoiditis, hearing disturhance. epistaxis, sore throat, headache and cough are wind-stagnanc(風鬱), wind-warm(風溫), wind-fire(風火), wind-dryness(風燥), dryness-heat(燥熱), the treatment of pungent-cool-evaporating(辛凉解表) with Dajosan(茶調散), Mori Folium(桑葉), Lonicerae Flos(金銀花), Forsythiae Fructus(連翹), Viticis Fructus(蔓荊子), Prunellae Spica(夏枯草), Arctii Fructus(牛蒡子), etc can be applied. 2) When the pathogenesis of hoarseness, cough and asthma are cold(寒), cold with endogenous heat(寒包熱, 外冷內熱), water retention(水邪), fluid retention(伏飮), impairment of YangKi by overexertion(勞傷陽氣), the treatment of pungent-warm-evaporating(辛溫解表) with Mahaenggamseoktang(麻杏甘石湯), Socheongryongtang(小靑龍湯), Jeongryeokdaejosapyetang(정력대조사폐탕), Gyejitang(桂枝湯), Armeniacae Amarum Semen(杏仁), etc can be applied. 3) When the pathogenesis of photopsia, otorrhea, otalgia, rhinorrhea, sinusitis, epistaxis, sore throat, hoarseness, headache and cough are stagnancy-induced heat(鬱熱), wind-dryness(風燥), wind-heat(風熱), summer heat(暑熱), summer wind(暑風), insidious summer heat(伏暑), autumn heat(秋暑), autumn wind(秋風), autumn dryness(秋燥), dryness-heat(燥熱), heat in Ki system(氣分熱), insidious warm(溫伏), brain discharge by fire in Ki system(氣火 腦熱), heat in stomach(胃熱), endogenous fire by deficiency of Yin(陰虛內火), deficiency of Yin in stomach(胃陰虛), the treatment of Ki-cooling(淸氣) with Bangpungtongseongsan(防風通聖散), Ikweonsan(益元散), Gyejibaekhotang(桂枝白虎湯), Geumgwemaekmundongtang(금궤맥문동탕), Gyeongokgo(瓊玉膏), Sojae Semen Praeparatum(두시), Scutellariae Radix(黃芩), Phyllostachys Folium(竹葉), Adenophorae Radix(沙參), Mori Cortex(桑白皮), Fritillariae Cirrhosae Bulbus(貝母), etc can be applied. 4) When the pathogenesis of blepharitis, hyperemia, ophthalmalgia, full-feeling, otorrhea, otalgia, tinnitus, hearing disturbance, sinusitis, hoarseness, headache and cough are fire in liver(肝火), fire in gallbladder(膽火), ministerial fire in Soyang system(少陽相火), wind-stagnancy(風鬱), stagnancy-induced fire(鬱火), brain discharge by phlegm-fire(痰火 腦熱), the treatment of mediation(和解) with Gardeniae Fructus(梔子), Moutan Cortex(牧丹皮), Saigae Tataricae Cornu(羚羊角), Artemisiae Annuae Herba(靑蒿), Cyperi Rhizoma(香附子), Poria(적복령), etc can be applied. 5) When the pathogenesis of blepharedema and cough are dampness in both spleen and lung(脾肺濕) damp-heat(濕熱), damp-phlegm(濕痰), the treatment of dampness-resolving(化濕) with Poria(백복령), Coicis Semen(薏苡仁), Tetrapanacis Medulla(通草), Armeniacae Amarum Semen(杏仁), Talcum(滑石), etc can be applied. 6) When the pathogenesis of vertigo and cough are deficiency of Yong(營虛), heat in Yong, system(營熱), the treatment of Yong-cooling(淸營) with Rehmanniae Radix(生地黃), Liriopis Tuber(麥門冬), Biotae Semen(柏子仁), Lilii Bulbus(百合), Phyllostachys Folium(竹葉), etc can be applied. 7) When the pathogenesis of epistaxis are heat in blood system of heart(心血熱), reversed flow of fire(火上逆), overexertion(努力), the treatment of blood-cooling(凉血) with Rhinoceri Cornu(犀角), Rehmanniae Radix(生地黃), Moutan Cortex(牧丹皮), Salviae Miltiorrhizae Radix(丹參), Scrophulariae Radix(玄蔘), etc can be applied. 8) When the pathogenesis of nasal obstruction is pathogen-stagnancy(邪鬱), the treatment of resuscitation(開竅) with Sosang(少商, LU11) acupuncture can be applied. When the pathogenesis of hoarseness is evil Ki(穢濁), the treatment of resuscitation(開竅) with Arctii Fructus(牛蒡子), Lasiosphaera Seu Calvatia(馬勃), Curcumae Radix(鬱金), etc can be applied. When the pathogenesis of headache is stasis of both Ki and blood(氣血瘀痺), the treatment of resuscitation(開竅) with Cnidii Rhizoma(川芎), Asari Herba Cum Radice(細辛), Scorpio(全蝎), moxibustion(灸), etc can be applied. 9) When the pathogenesis of lacrimal hypersecretion, visual disturbance, mydriasis, tinnitus, hearing disturbance, sinusitis, epistaxis, hoarseness and cough are deficiency of Yin(陰虛), deficiency of kidney(腎虛), deficiency of both liver and kidney(肝腎虛), deficiency of both heart and kidney(心腎虛), brain discharge by deficiency of Yin(陰虛 腦熱), exuberance of Yang in liver(肝陽上亢), overexertion(勞損), the treatment of Yin-replenishing(滋陰) with Yukmijihwanghwan(六味地黃丸), Hojamhwan(虎潛丸), Jeobutang(猪膚湯), Lycii Fructus(枸杞子), Polygoni Multiflori Radix(何首烏), Rehmanniae Radix(生地黃), Schizandrae Fructus(五味子), Liriopis Tuber(麥門冬), Asini Gelatinum(阿膠), etc can be applied. 10) When the pathogenesis of ophthalmalgia, mydriasis, vertigo and headache are deficiency of Yin in liver(肝陰虛), exuberance of Yang in liver(肝陽上亢), endogenous wind(內風), excess in upper and deficiency in lower part(上實下虛), the treatment of Yin-replenishing(滋陰) and endogenous wind-calming(熄風) with Rehmanniae Radix Preparat(熟地黃), Lycii Fructus(枸杞子), Polygoni Multiflori Radix(何首烏), Paeoniae Radix Alba(白芍藥), Ostreae Concha(牡蠣), Saigae Tataricae Cornu(羚羊角), Chrysanthemi Flos(菊花), etc be applied. 11) When the pathogenesis of mydriasis, sinusitis, hoarseness, headache, cough and asthma are exhaustion of vital essence(精氣無收藏), brain discharge(腦髓不固), floating Yang(陽虛浮), exsanguination(失血), deficiency of both Yin and Yang(陰陽不足), overexertion(勞損), deficiency of Yang in kidney(腎陽虛), the treatment of Yang-restoring and exhaustion-arresting(回陽固脫) with Yangyeongtang(養營湯), Cheonjinhwan(天眞丸), Bokmaektang(복맥탕), Geonjungtang(建中湯), Dogihwan(都氣丸), Singihwan(腎氣丸), Jinmutang(眞武湯), Ostreae Concha(牡蠣), Nelumbinis Semen(蓮子肉), etc can be applied. 12) When the pathogenesis of lacrimal hypersecretion, vertigo and headache are deficiency of stomach and endogenous wind(胃虛內風), endogenous wind with phlegm(內風挾痰), liver check of stomach(肝木橫擾), the treatment of concomitant-treating of both liver and stomach(肝胃同治) with Paeoniae Radix Alba(白芍藥), Uncariae Ramulus Et Uncus(釣鉤藤), Gastrodiae Rhizoma(天麻), Astragali Radix(황기), Pinelliae Rhizoma(半夏), etc can be applied. When the pathogenesis of asthma is failure of kidney to promote inspiration(腎不納氣), the treatment of kidney-tonifing and inspiration-promoting(補腎納氣) with Singihwan(腎氣丸), Psoraleae Fructus(補骨脂), Juglandis Semen(胡桃), Aquilariae Resinatum Lignum(沈香), etc can be applied. When the pathogenesis of asthma is deficiency of Ki(氣虛), the treatment of Ki-reinforcing(補氣) with Sagunjatang(四君子湯), Insamgeonjungtang(人參建中湯), etc can be applied.

• Economic and Environmental Geology
• /
• v.30 no.4
• /
• pp.289-301
• /
• 1997

The Boguk cobalt mine is located within the Cretaceous Gyeongsang Sedimentary Basin. Major ore minerals including cobalt-bearing minerals (loellingite, cobaltite, and glaucodot) and Co-bearing arsenopyrite occur together with base-metal sulfides (pyrrhotite, chalcopyrite, pyrite, sphalerite, etc.) and minor amounts of oxides (magnetite and hematite) within fracture-filling $quartz{\pm}actinolite{\pm}carbonate$ veins. These veins are developed within an epicrustal micrographic granite stock which intrudes the Konchonri Formation (mainly of shale). Radiometric date of the granite (85.98 Ma) indicates a Late Cretaceous age for granite emplacement and associated cobalt mineralization. The vein mineralogy is relatively complex and changes with time: cobalt-bearing minerals with actinolite, carbonates, and quartz gangues (stages I and II) ${\rightarrow}$ base-metal sulfides, gold, and Fe oxides with quartz gangues (stage III) ${\rightarrow}$ barren carbonates (stages IV and V). The common occurrence of high-temperature minerals (cobalt-bearing minerals, molybdenite and actinolite) with low-temperature minerals (base-metal sulfides, gold and carbonates) in veins indicates a xenothermal condition of the hydrothermal mineralization. High enrichment of Co in the granite (avg. 50.90 ppm) indicates the magmatic hydrothermal derivation of cobalt from this cooling granite stock, whereas higher amounts of Cu and Zn in the Konchonri Formation shale suggest their derivations largely from shale. The decrease in temperature of hydrothermal fluids with a concomitant increase in fugacity of oxygen with time (for cobalt deposition in stages I and II, $T=560^{\circ}C-390^{\circ}C$ and log $fO_2=$ >-32.7 to -30.7 atm at $350^{\circ}C$; for base-metal sulfide deposition in stage III, $T=380^{\circ}-345^{\circ}C$ and log $fO_2={\geq}-30.7$ atm at $350^{\circ}C$) indicates a transition of the hydrothermal system from a magmatic-water domination toward a less-evolved meteoric-water domination. Sulfur isotope data of stage II sulfide minerals evidence that early, Co-bearing hydrothermal fluids derived originally from an igneous source with a ${\delta}^{34}S_{{\Sigma}S}$ value near 3 to 5‰. The remarkable increase in ${\delta}^{34}S_{H2S}$ values of hydrothermal fluids with time from cobalt deposition in stage II (3-5‰) to base-metal sulfide deposition in stage III (up to about 20‰) also indicates the change of the hydrothermal system toward the meteoric water domination, which resulted in the leaching-out and concentration of isotopically heavier sulfur (sedimentary sulfates), base metals (Cu, Zn, etc.) and gold from surrounding sedimentary rocks during the huge, meteoric water circulation. We suggest that without the formation of the later, meteoric water circulation extensively through surrounding sedimentary rocks the Boguk cobalt deposits would be simple veins only with actinolite + quartz + cobalt-bearing minerals. Furthermore, the formation of the meteoric water circulation after the culmination of a magmatic hydrothermal system resulted in the common occurrence of high-temperature minerals with later, lower-temperature minerals, resulting in a xenothermal feature of the mineralization.

• Economic and Environmental Geology
• /
• v.49 no.6
• /
• pp.459-467
• /
• 2016

Due to the limited areal space for installation, borehole heat exchangers (BHEs) at depths deeper than 300 m are considered for geothermal heating and cooling in the urban area. The deep vertical closed-loop BHEs are unconventional due to the depth and the range of the typical installation depth is between 100 and 200 m in Korea. The BHE in the study consists of 50A (outer diameter 50 mm, SDR 11) PE U-tube pipe in a 150 mm diameter borehole with the depth of 300 m. In order to compensate the buoyancy caused by the low density of PE pipe ($0.94{\sim}0.96g/cm^3$) in the borehole filled with ground water, 10 weight band sets (4.6 kg/set) were attached to the bottom of U-tube. A thermal response test (TRT) and fundamental basic surveys on the thermophysical characteristics of the ground were conducted. Ground temperature measures around $15^{\circ}C$ from the surface to 100 m, and the geothermal gradient represents $1.9^{\circ}C/100m$ below 100 m. The TRT was conducted for 48 hours with 17.5 kW heat injection, 28.65 l/min at a circulation fluid flow rate indicates an average temperature difference $8.9^{\circ}C$ between inlet and outlet circulation fluid. The estimated thermophysical parameters are 3.0 W/mk of ground thermal conductivity and 0.104 mk/W of borehole thermal resistance. In the stepwise evaluation of TRT, the ground thermal conductivity was calculated at the standard deviation of 0.16 after the initial 13 hours. The sensitivity analysis on the borehole thermal resistance was also conducted with respect to the PE pipe diameter and the thermal conductivity of backfill material. The borehole thermal resistivity slightly decreased with the increase of the two parameters.

• The Korean Journal of Pharmacology
• /
• v.19 no.1
• /
• pp.15-35
• /
• 1983

Although it has been well known that ventricular fibrillation is the most important complication during hypothermia, much investigation has failed to show the exact nature of the etiology of ventricular fibrillation. Recently, there has been considerable research on the relationship between sympathetic activity and ventricular fibrillation under hypothermia. Cardiac muscle normally contains a certain amount of norepinephrine and the dramatic effect of this catecholamines on the cardiac muscle is well documented. It is, therefore, conceivable that cardiac catecholamines might exert an influence on the susceptibility of heart muscle to tachycardia, ventricular fibrillation and arrhythmia, under hypothermia. Hypothermia itself is stress enough to increase tonus of sympatheticoadrenal system. The normal heart is supplied by an autonomic innervation and is subjected to action of circulating catecholamines which may be released from the heart. If the reaction of the heart associated with a variable amount of cardiac catecholamines is. permitted to occur in the induction of hypothermia, the action of this agent on the heart has not to be differentiated from the direct effects of cooling. The studies presented in this paper were designed to provide further information about the cardio-physiological effects of reduced body temperature, with special reference to the role of catecholamines in ventricular fibrillation. Healthy cats, weighing about 3 kg, were anesthetized with pentobarbital(30 mg/kg) intraperitoneally. The trachea was intubated and the endotracheal tube was connected to a C.F. Palmer type A.C. respirator. Hypothermia was induced by immersing the cat into a ice water tub and the rate of body temperature lowering was $1^{\circ}C$ per 5 to 8 min. Esophageal temperature and ECG (Lead II) were simultaneously monitored. In some cases the blood pH and serum sodium and potassium were estimated before the experiment. After the experiment the animals were killed and the hearts were excised. The catecholamines content of the cardiac muscle was measured by the method of Shore and Olin (1958). The results obtained are summarized as follows. 1) In control animal the heart rate was slowed as the temperature fell and the average pulse rates of eight animals were read 94/min at $31^{\circ}C$, 70/min at $27^{\circ}C$ and 43/min at $23^{\circ}C$ if esophageal temperature. Ventricular fibrillation was occurred with no exception at a mean temperature of $20.3^{\circ}C(21-l9^{\circ}C)$. The electrocardiogram revealed abnormal P waves in each progressive cooling of the heart. there was, ultimately, a marked delay in the P-R interval, QRS complex and Q-T interval. Inversion of the T waves was characteristic of all animals. The catecholamines content of the heart muscle excised immediately after the occurrence of ventricular fibrillation was about thirty percent lower than that of the pre-hypothermic heart, that is, $1.0\;{\mu}g/g$ wet weight compared to the prehypothermic value of $1.41\;{\mu}g/g$ wet weight. The changes of blood pH, serum sodium and potassium concentration were not remarkable. 2) By the adrenergic receptor blocking agent, DCI(2-3 mg/kg), given intramuscularly thirty minutes before hypothermia, ventricular fibrillation did not occur in one of five animals when their body temperature was reduced even to $16^{\circ}C$. These animals succumbed at that low temperature, and the changes of heart rate and loss of myocardial catecholamines after hypothermia were similar to those of normal animals. The actual effect of DCI preventing the ventricular fibrillation is not predictable. 3) Administration of reserpine(1 mg/kg, i.m.) 24 hours Prior to hypothermia disclosed reduced incidence of ventricular fibrillation, that is, six of the nine animals went into fibrillation at an average temperature of $19.6^{\circ}C$. By reserpine myocardial catecholamines content dropped to $0.045\;{\mu}g/g$ wet weight. 4) Bretylium pretreatment(20 mg/kg, i.m.), which blocks the release of catecholamines, Prevented the ventricular fibrillation under hypothermia in four of the eight cats. The pulse rate, however, was approximately the same as control and in some cases was rather slower. 5) Six cats treated with norepinephrine(2 mg/kg, i.m.) or DOPA(50 mg/kg) and tranylcypromine(10 mg/kg), which tab teen proved to cause significant increase in the catecholamines content of the heart muscle, showed ventricular fibrillation in all animals under hypothermia at average temperature of $21.6^{\circ}C$ and the pulse rate increased remarkably as compared with that of normal. Catecholamines content of cardiac muscle of these animals markedly decreased after hypothermia but higher than control animals. 6) The functional refractory periods of isolated rabbit atria, determined by the paired stimulus technique, was markedly shortened by administration of epinephrine, norepinephrine and isoproterenol. 7) Adrenergic beta-blocking agents, such as pronethalol, propranolol and sotalol(MJ-1999), inhibited completely the shortening of refractory period induced by norepinephrine. 8) Pretreatment with either phenoxftenbamine or phentolamine, an adrenergic alphatlocking agent, did not modify the decrease in refractory period induced by norepinephrine. From the above experiment it is possible to conclude that catecholamines play an important role in producing ventricular fibrillation under hypothermia. The shortening of the refractorf period of cardiac muscle induced by catecholamines mar be considered as a partial factor in producing ventriculr fibrillaton and to be mediated by beta-adrenergic receptor.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.14-14
• /
• 2011

W (tungsten)-alloys will be the most promising plasma facing armor materials in highly loaded plasma interactive components of the next step fusion reactors due to its high melting point, high sputtering resistance and low deuterium/tritium retention. The bonding technology of tungsten to Cu alloy was one of the key issues. In this paper, W/CuCrZr diffusion bonding has been performed successfully by inserting pure metal interlay. The joint microstructure, interfacial elements migration and phase composition were analyzed by SEM, EDS, XRD, and the joint shear strength and micro-hardness were investigated. The mock-ups were fabricated successfully with diffusion bonding and the cladding technology respectively, and the high heat flux test and thermal fatigue test were carried out under actively cooling condition. When Ni foil was used for the bonding of tungsten to CuCrZr, two reaction layers, Ni4W and Ni(W) layer, appeared between the tungsten and Ni interlayer with the optimized condition. Even though Ni4W is hard and brittle, and the strength of the joint was oppositely increased (217 MPa) due primarily to extremely small thicknesses (2~3 ${\mu}m$). When Ti foil was selected as the interlayer, the Ti foil diffused quickly with Cu and was transformed into liquid phase at $1,000^{\circ}C$. Almost all of the liquid was extruded out of the interface zone under bonding pressure, and an extremely thin residual layer (1~2 ${\mu}m$) of the liquid phase was retained between the tungsten and CuCrZr, which shear strength exceeded 160 MPa. When Ni/Ti/Ni multiple interlayers were used for bonding of tungsten to CuCrZr, a large number of intermetallic compound ($Ni_4W/NiTi_2/NiTi/Ni_3T$) were formed for the interdiffusion among W, Ni and Ti. Therefore, the shear strength of the joint was low and just about 85 MPa. The residual stresses in the clad samples with flat, arc, rectangle and trapezoid interface were estimated by Finite Element Analysis. The simulation results show that the flat clad sample was subjected maximum residual stress at the edge of the interface, which could be cracked at the edge and propagated along the interface. As for the rectangle and trapezoid interface, the residual stresses of the interface were lower than that of the flat interface, and the interface of the arc clad sample have lowest residual stress and all of the residual stress with arc interface were divided into different grooved zones, so the probabilities of cracking and propagation were lower than other interfaces. The residual stresses of the mock-ups under high heat flux of 10 $MW/m^2$ were estimated by Finite Element Analysis. The tungsten of the flat interfaces was subjected to tensile stresses (positive $S_x$), and the CuCrZr was subjected to compressive stresses (negative $S_x$). If the interface have a little microcrack, the tungsten of joint was more liable to propagate than the CuCrZr due to the brittle of the tungsten. However, when the flat interface was substituted by arc interfaces, the periodical residual stresses in the joining region were either released or formed a stress field prohibiting the growth or nucleation of the interfacial cracks. Thermal fatigue tests were performed on the mock-ups of flat and arc interface under the heat flux of 10 $MW/m^2$ with the cooling water velocity of 10 m/s. After thermal cycle experiments, a large number of microcracks appeared at the tungsten substrate due to large radial tensile stress on the flat mock-up. The defects would largely affect the heat transfer capability and the structure reliability of the mock-up. As for the arc mock-up, even though some microcracks were found at the interface of the regions, all microcracks with arc interface were divided into different arc-grooved zones, so the propagation of microcracks is difficult.

• Journal of Bio-Environment Control
• /
• v.7 no.4
• /
• pp.298-310
• /
• 1998

This research was carried out to find out spray characteristics of 3 types of spray nozzle to be used for greenhouse cooling. Following results were obtained from this experimental study. Water amounts sprayed with each nozzle were increased with the spraying pressure. However the increment of sprayed amount with the increase of spraying pressure were not consistent regardless of nozzle types. For the whole tested spraying pressures of nozzle-type I, II, III, the minimum droplet sizes were about 1.7~2.5$\mu$m, 1.7~2.2$\mu$m and 1.7~2.2$\mu$m, respectively, and the maximum droplet sizes were about 44~60$\mu$m, 52~71$\mu$m and 45~61$\mu$m, respectively, and the average droplet sizes were about 23~38$\mu$m, 19~24$\mu$m and 17~25$\mu$m, respectively The most appropriate spraying pressures of nozzle-type I, II, III were analyzed to be 70kgf/$\textrm{cm}^2$, 30kgf/$\textrm{cm}^2$ and 30kgf/$\textrm{cm}^2$, respectively, and their sprayed amounts were about 124mL/min, 103mL/min and 84mL/min, respectively, and average droplet sizes were 22.6$\mu$m, 21.8$\mu$m and 20.6$\mu$m, respectively. Also, with the order of nozzle-type I, II, III, droplet size distributions less than 30$\mu$m were 95.4%, 85.7% and 79.0%, respectively, and the distributions larger than 40$\mu$m were 0.2%, 1.28% and 1.67%, respectively. However most all of the droplet size were less than 50$\mu$m.

• Economic and Environmental Geology
• /
• v.20 no.1
• /
• pp.35-60
• /
• 1987

The geochemical characteristics including minerals, major and trace elements chemistries of the Proterozoic, Jurassic and Cretaceous granites in Korea are systematically summarized and intended to decipher the origin and crystallization process in connection with the tectonic evolution. The granites in Korea are classified into three different ages of the granites with their own distinctive geochemical patterns: 1) Proterozoic granitoids; 2) Jurassic granites(cratonic and mobile belt); 3) Cretaceous-Tertiary granites. The Proterozoic granite gneisses (I-type and ilmenite-series) formed by metamorphism of the geochemically evolved granite protolith. The Proterozoic granites (S-type and ilmenite-series) produced by remobilization of sialic crust. The Jurassic granites (S-type and ilmenite-series) were mainly formed by partial melting of crustal materials, possibly metasedimentary rocks. The Cretaceous granites (I-type and magnetite-series) formed by fractional crystallization of parental magmas from the igneous protolith in the lower crust or upper mantle. The low temperature ($315{\sim}430^{\circ}C$) and small temperature variations (${\pm}20{\sim}30^{\circ}C$) in the cessation of exsolution of perthites for the Proterozoic and Jurassic granites might have been caused by slow cooling of the granites under regional metamorphic regime. The high ($520^{\circ}C$) and large temperature variations (${\pm}110^{\circ}C$) of perthites for the Cretaceous granites postulate that the rapid cooling of the granitic magma. In terms of the oxygen fugacity during the feldspar crystallization in the granite magmas, the Jurassic mobile belt granites were crystallized in the lowest oxygen fugacity condition among the Korean granites, whereas the Cretaceous granites in the Gyeongsang basin at the high oxygen fugacity condition. The Jurassic mobile belt granites are located at the Ogcheon Fold Belt, resulting by closing-collision situation such as compressional tectonic setting, and emplaced into a Kata-Mesozonal ductile crust. The Jurassic cratonic granites might be more evolved either during intrusion through thick crust or owing to lower degree of partial melting in comparison with the mobile belt granites. The Cretaceous granites are possibly comparable with a continental margin of Andinotype. Subduction of the Kula-Pacific ridge provided sufficient heat and water to trigger remelting at various subcrustal and lower crustal igneous protoliths.

• Economic and Environmental Geology
• /
• v.51 no.1
• /
• pp.67-76
• /
• 2018

This study reviews three eco-friendly energy towns with hybrid thermal energy supply systems and borehole thermal energy storage (BTES) in Canada and Denmark. The district heating and cooling systems were designed by using multi-source energy for the higher efficiency and reliability as well as environment. ADEU (Alexandra District Energy Utility) located at the developing area in the city of Richmond, Canada was designed to supply district energy with the installation of 726 borehole heat exchangers (BHEs) and a backup boiler using natural gas. DLSC (Drake Landing Solar Community) located in the town of Okotoks, Canada is a district system to store solar thermal energy underground during the summer season by seasonal BTES with 144 BHEs. Brædstrup Solpark district heating system located in Denmark has been conducted energy supply from multiple energy sources of solar thermal, heat pump, boiler plants and seasonal BTES with 48 BHEs. These systems are designed based on social and economic benefits as well as nature-friendly living space according to the city based energy perspective. Each system has the energy center which distribute the stored thermal energy to each house for heating during the winter season. The BHE depth and ground thermal storage volume are designed by the heating and cooling load as well as the condition of ground water flow and thermophysical properties of the ground. These systems have been proved the reliance and economic benefits by providing consistent energy supply with competitive energy price for many years. In addition, the several expansions of the service area in ADEU and Brædstrup Solpark have been processed based on energy supply master plan. In order to implement this kind of project in our country, the regulation and policy support of government or related federal organization are required. As well as the government have to make a energy management agency associated with long-term supply energy plan.

• Korean Journal of Food Science and Technology
• /
• v.32 no.2
• /
• pp.252-257
• /
• 2000

The physicochemical and pasting properties of amaranth starches isolated from five cultivars, Andy, Suvarna, Nu World, K266-1, K432, grown in Korea, were investigated. The shapes of starch granules were all polygonal and size was in the range $1.14{\sim}1.48\;{\mu}m$ for all five cultivars. X-ray diffractograms were shown typical A type diffraction patterns for all amaranth starches. The protein and crude lipid contents of starches were $0.13{\sim}0.23%$ and $0.01{\sim}0.05%$, respectively. The apparent amylose contents ranged from $2.79{\sim}4.35%$ and the water binding capacities were $128.05{\sim}135.80%$. The transmittances of 0.1% amaranth starch suspensions except K266-1 increased rapidly above $65^{\circ}C$, thereafter increased slowely. The initial pasting and peak temperature ranges of five cultivars by RVA were $71.3{\sim}73.7^{\circ}C$ and $81.5{\sim}84.0^{\circ}C$, respectively. The peak and cooling viscosities followed the order : Nu World>Andy>Suvarna>K432>>K266-1. Nu World was shown the highest peak (166), final (103) and cooling viscosities (30 RVU). K266-I exhibited the lowest setback (-38) of all five cultivars. Gelatinization (To) and peak temperature (Tp) of amaranth starches in DSC thermograms were $65.7{\sim}68.0^{\circ}C$ and $70.6{\sim}75.8^{\circ}C$, respectively. Enthalpies followed the order: K266-1