• 한국해양공학회지
• /
• 제12권1호
• /
• pp.162-174
• /
• 1998

Construction of the Kyung-Inn Canal between Inchon and Han River water way of 18 kilometer length is considered recently. The canal may reduce traffic congestions between Seoul and Inchon, remarkably. Since the type of transportation system of the canal will be barge system, an analysis on the canal barge characteristics is carried out in this paper. The merits and demerits of various canal barge transportation systems are studied, respectively. Also, several barge connecting systems are studied and the corresponding characteristics are analyzed and compared. Optimal barge system is selected based on the simple modeling of the several barge systems and the relevant evaluations. Primitive design issue of the barge transportation system of the canal is also presented.

• 대한교통학회지
• /
• 제14권1호
• /
• pp.81-99
• /
• 1996

This study aims to assess the potential competition among road, rail, and coastal transport under various scenarios concerning the future inland container transport systems in Pusan-KyungIn corridor. For this SP approaches are adopted to collect data from shippers and carriers, and multinomial logit models are estimated at disaggragate level. The results of the analysis indicate that the SP data are reliable, and that the mode choice models estimated are valid. The results also indicate that the most effective policy to divert the freight volume from road to other modes is to reduce freight rates for the railway, and is to transport time for the coastal water with improved reliability.

• 융복합기술연구소 논문집
• /
• 제2권2호
• /
• pp.30-34
• /
• 2012

The SI thermochemical cycle process accomplishes water splitting through distinctive three chemical reactions. We focused on thermodynamic models applicable to the process. Recently, remarkable models based on the assumed ionic species have been developed to describe highly nonideal behavior on the liquid phase reactions. ElecNRTL models with ionic reactions were proposed in order to provide reliable process simulation results for phase equilibrium calculations in Section II and III. In this study, the current thermodynamic models of SI thermochemical cycle process were briefly described and the calculation results of the applied ElecNRTL models for phase equilibrium calculations were illustrated for binary systems.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2000년도 추계학술대회 논문집
• /
• pp.159-164
• /
• 2000

In order to clarify the seasonal variation of residual current and material transportation process in Hiroshima Bay, JAPAN, the real-time simulation of residual current and particle tracking by using Euler-Lagrange model were carried out. The calculated tidal current and water temperature and salinity showed good agreement with the observed ones. The residual currents showed the southward flow pattern at the upper layer, and the northward flow pattern at the lower layer. The flow structure of residual current in Hiroshima Bay is an estuarine circulation affected by density flow and wind driven current. The residual current plays an improtant role of material transportation in th bay.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2011년도 춘계학술대회
• /
• pp.234-236
• /
• 2011

Saigon Port within the port system of the Vietnam Maritime sector is one of the port having highest throughput and productivity in the country. The marine traffic of Saigon water ways is the heaviest in Vietnam and the number of marine accidents in this area are much higher than the others area in Vietnam. In order to reduce the risk of the accident in Saigon fairway, this paper concentrates on marine accident frequency in this area. The marine traffic and the marine accident were analyzed to find out the probability of vessel collision and the marine traffic risk. It follows that the main shipping route through Saigon fairway has the high risk of ship-ship collision.

• Journal of Advanced Marine Engineering and Technology
• /
• 제18권4호
• /
• pp.1-12
• /
• 1994

Most merchant ships are supplied with the only essential fresh water from a port for economical cargo transportation and the reduction of a nevigation expense. And the deficient fresh water for a voyage is produced by fresh water generator with the various exhaust energy generated in the engine room on a voyage. At present, an evaporation type fresh water generator are extensively used on ship because the operating cost of it is lower than that of a reverse osmosis pressure type. This study introduce a development results on the large evaporation type fresh water generator enable to be used for large merchant ships. It is accomplished the performance test using the developed large fresh water generator.

• 한국농촌건축학회논문집
• /
• 제11권2호
• /
• pp.29-36
• /
• 2009

The recently research shows that the many tourists of Suanbo hot spring waters haven't satisfied the service. These reasons due to that they did not properly consider the satisfaction of tourists' services and index. However, satisfaction level of hot spring waters tourists is interacted complicatedly with various factors, the interactions are not easily identified. A structural equations model is adopted to capture the complex relationships among variables. In the model estimation, we used 140 survey data of Suanbo hot spring waters tourists. The SEM with several factors mentioned above as exogenous variables shows that they have complex and strong relationships. As results of a SEM, it was shown that variables influencing in pleasance are surrounding scenery, clean condition inside hot springs and congestion for use in satisfaction level most. Secondly, in case of kindness, attitudes of employees influence in satisfaction level most, followed by attitudes of residents and kindness of employees. Thirdly, in case of information, it was shown guidance on internal roads influencing in satisfaction level most, followed by guidance on owner drivers, guidance on surrounding tourist attractions and guidance on public transportation. Finally, a variable influencing in accessibility most is satisfaction level of public transportation.

• Corrosion Science and Technology
• /
• 제10권5호
• /
• pp.175-179
• /
• 2011

The transportation and deposition of iron corrosion products are important elements that affect both the steam generator (SG) integrity and secondary system in pressurized water reactor (PWR) nuclear power plants. Most of iron corrosion products are generated on carbon steel materials due to flow accelerated corrosion (FAC). The several parameters like water chemistry, temperature, hydrodynamic, and steel composition affect FAC. It is well established that the at-temperature pH of the deaerated water system has a first order effect on the FAC rate of carbon steels through nuclear industry researches. In order to reduce transportation and deposition of iron corrosion products, increasing pH(t) tests were applied on secondary system of A, B units. Increasing pH(t) successfully reduced flow accelerated corrosion. The effect of increasing pH(t) to inhibit FAC was identified through the experiment and pH(t) evaluation in this paper.

• 융복합기술연구소 논문집
• /
• 제4권2호
• /
• pp.23-26
• /
• 2014

As an effective separation method for biomolecules, aqueous two-phase systems based on ionic liquids were suggested. Hydrophobic ionic liquids are more expensive and viscous in spite of their usage in the ionic liquid/water biphasic extraction compared with hydrophilic ionic liquids. In case of aqueous two-phase systems using hydrophilic ionic liquids, they can be diluted in aqueous phase. Experimental results show that aqueous two phase systems can be formed by adding appropriate amount of ionic liquids to aqueous salts solutions. The viscosity of ionic liquid aqueous phase is proportional to the cation chain length in ionic liquids. It is founded that the ionic liquid based aqueous two phase systems are effective for the separation of biomolecules such as acrylic acid.

• 대한조선학회논문집
• /
• 제50권6호
• /
• pp.414-420
• /
• 2013

Generation and measurement methods of EG/AD model ice, which is used in KIOST ice model basin are investigated for improvement of its properties. Temperature of seed water, air temperature in the freezing phase and the target air temperature in the tempering phase were changed in the cold room, and the properties of model ice was measured in this conditions. We also verified a conventional measuring method of flexural strength of model ice caused a little measuring error in cold room, so that we suggested a new measuring method that must be used higher supports than double the thickness of the model ice. In this study, we improved the generation and measurement technique of EG/AD model ice, and the developed procedure at cold room can be applied to the KIOST ice model basin.