• 한국항만학회지
• /
• 제10권1호
• /
• pp.53-61
• /
• 1996

This paper describes the effect of wave control using submerged flat plate by the numerical calculation and the hydraulic model test. The boundary element method is used to develop a numerical solution for the flow field caused by monochromatic oblique waves incident upon an infinitely long, sumerged flat plate situated in arbitrary water depth. The effect of wave blocking is examined according to the change of length, submerged depth of flat plate and incident angles. Numerical results show that longer length, shallower submergence of flat plate and larger incident angles enhance the effect of wave blocking. To validate numerical analysis method, hydraulic model test was conducted in 2-D wave flume with 60 cm metal sheet. Reflected waves are extracted from water surface elevation in front of the location of a submerged plate by least square method with 3 wave gages. From comparing experimental results with numerical results, efficiency of numerical analysis method by this study could be confirmed well within wide ranges of wave frequencies.

• 한국환경과학회지
• /
• 제30권12호
• /
• pp.1067-1079
• /
• 2021

The coastal water is a space where salmon (Oncorhynchus keta), critical energy-conveying mediator, stay to adapt to different environments while traveling between ocean and river ecosystems for spawning and growth. The mid-eastern coast of Korea (MECW) is the southern limit of salmon distributed in the North Pacific Ocean. Understanding the distribution and migration characteristics of salmon in the MECW is important for the prediction of changes in the amount and distribution of salmon related to changes in the future marine environment. We analyzed the relationship between the salmon migratory timing ascending the Wangpi river and change in vertical seawater temperature and tidal elevation. Overall results highlight that (1) Salmon began to ascend the river when the sea surface water temperature (SST) decreased below 20℃; (2) The number of salmon ascending the river increased when the temperature difference between the upper and lower layers decreased, but decreased when the temperature difference was higher than 5℃; (3) The number of salmon ascending the river peaked, when the SST was 18℃-19℃ and sea levels rose at high tide. This study provide important insight into predicting changes in the ecosystem energy circulation through climate change at its southern distribution limit.

• 한국환경복원기술학회지
• /
• 제2권3호
• /
• pp.1-9
• /
• 1999

This paper described the results of the characteristics of the near-bottom flow and field analysis of the tidal flats sediment. It was the aim of this paper to grasp current flow of tidal flat's environment and influence factor for environmental change forecast of tidal flats. Field measurement of water velocity, water elevation, bed materials test, and temperature distribution of tidal flat were conducted. Thereafter, current flow, turbidity and temperature distribution of tidal flat sediment have been discussed. The field research results showed that the fluctuating velocity near the seabed before and after its appearance at low tide was strongly affected by the wind wave. The resuspension of the sea-bottom sediment took place with great intensity before and after the appearance of the seabed at low tide. Both the sea water level and the weather condition were a significant influential factors. Such as, temperature and turbidity just on the surface and the shallow layer of seabed sediments were varied largely with time and weather conditions, but that its deeper layers was almost constant. Temperature on the seabed sediments was strongly influenced by irradiance and water depth. The temperature variation of the tidal flat and the variation characteristics of the current flow and turbidity depend greatly on the inhabiting environment of the tidal flat benthic organism.

• 한국지리정보학회지
• /
• 제6권3호
• /
• pp.95-106
• /
• 2003

본 연구에서는 최근 도시계획, 수자원 및 방재 분야에서 높은 관심을 가지고 연구중인 항공레이저측량기법을 활용하여 시가지의 건축밀도를 평가하였다. 먼저, 레이저스캐너인 LiDAR(light detection and ranging)로 취득한 표고자료로부터 DEM(digital elevation model)과 DSM(digital surface model)을 구축하였으며, 건물의 높이를 계산하기 위해 DEM에는 ZONALMEAN 필터, DSM에는 ZONALMAJORITY 필터를 적용하였다. 필터링 과정으로부터 계산한 층수와 현지조사의 층수를 비교한 결과 표준오차 ${\pm}0.199$층을 확보할 수 있었다. 또한 건물 연면적 레이어와 구획 레이어를 중첩하여 통계분석함으로서 도시 구획별 용적률을 제시할 수 있었다. 항공레이저측량 자료를 이용하여 계산한 용적률과 현지조사로부터 계산한 용적률의 비교 결과, 용적률의 표준오차를 ${\pm}2.68%$로 확보할 수 있었다. 따라서, 항공레이저측량 자료는 향후 토지이용계획을 수립하는 의사결정자에게 매우 유용한 자료를 제공해 줄 것으로 기대한다.

• 한국해양공학회지
• /
• 제22권5호
• /
• pp.44-51
• /
• 2008

The planning and design of coastal structures against wave attack is required to accurately predict wave transformation, wave run-up, and fluid. particlevelocities an a slope. On tire other hand, in tire swash and surf zones of a natural beach, where coastal erosion and accretion occur at tire land-sea boundary, hydrodynamic analysis is essential. In this study, a RBREAK2 numerical model was created based on the nonlinear shallow water equation and laboratory measurements were carried out in terms of tire free surface elevations and velocities for tire cases of regular and irregular waves on 1 : 10 and 1 : 5 impermeable slopes. The data were used to evaluate tire applicability and limitations of tire RBREAK2 numerical model. The numerical mode1 could predict tire cross-shore variation of the wave profile reasonably well, but showed more accurate results for slopes that were steeper than 1 : 10. Except near tire wave crest, tire computed depth averaged velocities could represent tire measured profile below tire trough level fairly well.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제5권4호
• /
• pp.513-528
• /
• 2013

A floating Oscillating Water Column (OWC) wave energy converter, a Backward Bent Duct Buoy (BBDB), was simulated using a state-of-the-art, two-dimensional, fully-nonlinear Numerical Wave Tank (NWT) technique. The hydrodynamic performance of the floating OWC device was evaluated in the time domain. The acceleration potential method, with a full-updated kernel matrix calculation associated with a mode decomposition scheme, was implemented to obtain accurate estimates of the hydrodynamic force and displacement of a freely floating BBDB. The developed NWT was based on the potential theory and the boundary element method with constant panels on the boundaries. The mixed Eulerian-Lagrangian (MEL) approach was employed to capture the nonlinear free surfaces inside the chamber that interacted with a pneumatic pressure, induced by the time-varying airflow velocity at the air duct. A special viscous damping was applied to the chamber free surface to represent the viscous energy loss due to the BBDB's shape and motions. The viscous damping coefficient was properly selected using a comparison of the experimental data. The calculated surface elevation, inside and outside the chamber, with a tuned viscous damping correlated reasonably well with the experimental data for various incident wave conditions. The conservation of the total wave energy in the computational domain was confirmed over the entire range of wave frequencies.

• 한국태양에너지학회 논문집
• /
• 제23권3호
• /
• pp.23-28
• /
• 2003

The purpose of this study is to procure basic data to be used for solar power plant and concentrating collector designs. Site elevation is one of the major factors which influences the incoming insolation to the earth surface. Because the nonpermanent gases such as ozone, water vapor are unmixed components of the atmosphere and their concentrations are the function of height, the site elevation effects the relative proportion of the atmospheric constituents. We have measured solar radiation on Jiri Mt. (1,400m) and in Gurye area(115m) at the near same latitude. These values were then compared to obtain their characteristics and to investigate the potential for the solar utilization for both high and low elevated areas. From the experimental results, we concluded that 1) Daily mean horizontal global radiation and normal beam radiation on Mt. Jiri are 9.5%, and 35.3% higher than Gurye area respectively for a clear day. 2) A significant difference in atmospheric clearness index is observed between Mt. Jiri and Gurye areas.

• Geomechanics and Engineering
• /
• 제33권2호
• /
• pp.167-174
• /
• 2023

This study evaluated slope stability through a case study to determine the disaster risks associated with increased deforestation in structures, including schools and apartments, located in urban areas adjacent to slopes. The slope behind the ○○ High School in Gwangju, Korea, collapsed owing to heavy rain in August 2018. Historically, rainwater drained well around the slope during the rainy season. However, during the collapse, a large amount of seepage water flowed out of the slope surface and a shallow failure occurred along the saturated soil layer. To analyze the cause of the collapse, the images of the upper area of the slope, which could not be directly identified, were captured using unmanned aerial vehicles (UAVs). A digital elevation model of the slope was constructed through image analysis, making it possible to calculate the rainfall flow direction and the area, width, and length of logging areas. The change in the instability of the slope over time owing to rainfall lasting ten days before the collapse was analyzed through numerical analysis. Imaging techniques based on the UAV images were found to be effective in analyzing ground disaster risk maps in urban areas. Furthermore, the analysis was found to predict the failure before its actual occurrence.

• 대한원격탐사학회지
• /
• 제37권5_1호
• /
• pp.1177-1186
• /
• 2021

북극의 융빙호(melt pond)는 해빙 면적 감소 및 북극 빙권 변화에 중요한 역할을 하기 때문에 융빙호의 정확한 관측이 필요하다. 미국 NASA의 차세대 고도계 위성인 Ice, Cloud, and Land elevation Satellite-2 (ICESat-2)는 532 nm의 녹색 레이저를 발사한 뒤 반사되는 광자(photon)의 이동 시간을 계산하여 전 지구적으로 고해상도 고도 정보를 관측한다. ICESat-2는 현재 널리 쓰이고 있는 고도계인 CryoSat-2에 비해 세밀한 관측이 가능하기 때문에, Cryosat-2에서 관측할 수 없는 작은 규모의 융빙호를 탐지할 수 있을 것으로 기대된다. ICESat-2의 기본적인 정보로는 표면 높이(surface height)와 반사되는 광자의 수(photon count)가 있다. 본 연구에서는 각 ICESat-2 지점을 중심으로 10 m 길이의 segment를 생성하여 segment 내의 높이 표준편차와 총 광자 수를 활용한 융빙호 탐지 알고리즘을 제시하였다. 융빙호는 표면이 해빙에 비해 매끄러워서 높이의 분산이 적으므로 높이의 표준편차를 활용하여 일차적으로 융빙호와 해빙을 분류하였다. 그 다음으로는 융빙호 중에서 표면이 물인 융빙호와 얼음 표면인 융빙호를 분류하였다. 표면이 물인 융빙호는 광자를 많이 흡수하기 때문에 단위 segment 내에서 반사되어 수집된 광자의 수가 적으며, 반대로 얼음으로 덮인 융빙호는 반사되는 광자의 수가 많다. 결과적으로 본 연구에서 제시하는 융빙호 탐지 방법을 통해 물과 얼음으로 덮인 융빙호를 구별하여 탐지할 수 있다. Sentinel-2 광학 영상을 활용하여 융빙호 탐지 결과의 정성적인 분석을 하였다. 그 결과 Sentinel-2 광학 영상으로 구분하기 어려운 표면이 물인 융빙호와 얼음인 융빙호를 ICESat-2를 활용해 효과적으로 분류하였다. 마지막으로 고도계 위성 및 광학 영상을 활용한 융빙호 탐지의 고찰을 서술하였다.

• 한국해안해양공학회지
• /
• 제4권4호
• /
• pp.208-218
• /
• 1992

1차원 폐쇄형 수노에서 바람에 의해 발생되는 흐름에 대해 수면구배와 유속의 수직구조를 제시하는 해석해를 정상상태 하에서 유도하였다. 해석해는 저면의 경계조건으로 저면마찰응력 $ au$$_{b}$를 부여하는 가정하에 유도되었으며, 연직 운동양 확산계수 $ extsc{k}$$_{M}$이 수심에 무관한 상수, 수심의 1차함수 및 2차함수일 경우를 포함하며, 저면류속이 no-slip이라는 가정과 저면마찰응력 $\tau$$_{b}$의 매개화에 따른 관계를 제시하고 있다. 모드 분리된, $\sigma$좌표를 채택한 (x-$\sigma$) 수치모형 결과와 유도된 해석해를 비교ㆍ검토하였다. 비교된 경우는 $textsc{k}$$_{M}$이 상수, 수심의 1차 및 2차함수인 경우로써, $textsc{k}$$_{M}$이 상수일 경우는 균일 수심, 완만한 수심경사 및 비교적 급격한 수심경사를 갖는 경우에 대해 수면구배와 유속구조를 검토 하였다. $textsc{k}$$_{M}$이 수심의 1차 및 2차함수인 경우에는 $\tau$$_{b}$의 변화에 대한 유원구조를 비교ㆍ분석하였다. 비교ㆍ분석 결과 유연구조는 $textsc{k}$$_{M}$ 값 뿐만 아니라 $textsc{k}$$_{M}$의 형태에 의해서도 변하며, $\tau$$_{b}$의 간에 의해서도 변하는 것을 보이고 있으며, 계산결과는 전반적으로 해자해와 일치함을 보였다.치함을 보였다.보였다.치함을 보였다.