• 설비공학논문집
• /
• 제14권12호
• /
• pp.1023-1030
• /
• 2002

This paper is to research the heat transfer characteristic performance of the copper-water heat pipe with the screen wicks. Recently, the semiconductor capacity of an electronic unit has been larger, on the contrary, its size has been much smaller. As a result, a high-performance cooling system is needed. Experimental variables are inclination angles, temperatures of cooling water and the mesh number of screen wicks. The distilled water was used for the working fluid. At the inclination angle $6^{\circ}$ in top heat mode, the two layers of the 100-mesh screen wick showed the best heat transfer performance. The thermal resistance of the two layers with the 100-mesh screen was 0.7~$0.8^{\circ}C$/W.

• 한국컴퓨터그래픽스학회논문지
• /
• 제25권3호
• /
• pp.31-41
• /
• 2019

포그 스크린은 미세한 물방울들로 구성된 스크린으로 관찰자는 포그 스크린을 투과한 영상을 관찰하게 된다. 일반 스크린과는 달리 관찰자는 무대 위에서 연기자가 포그 스크린에 표시된 이미지를 뚫고 들어가는 모습을 볼 수 있다. 본 논문에서는 상부에서 생성된 포그 입자 집단이 중력에 의하여 아래로 떨어질 때 평평한 수직 스크린을 이루도록 하는 하향식 포그 스크린 생성 장치 구현 방법을 기술한다. 본 기법은 수조안에 배치된 초음파 진동자에 의해 수조 표면에서 포그 입자가 발생되는 원리를 이용한다. 생성된 포그 집단이 하나의 평면을 유지할 수 있도록 포그가 나오는 통로 출구 양옆에 가이드 바람을 형성하는 기법과 포그 스크린 생성 장치의 설계와 제작 방법을 기술한다.

• 한국전산구조공학회논문집
• /
• 제24권3호
• /
• pp.289-294
• /
• 2011

본 논문에서는 유한요소모델을 사용하여 원자력 발전용 해수여과장치에 대한 동적 내진해석을 수행하였다. 장치의 검증을 위해서 운전기준지진(Operating Basis Earthquake, OBE)과 안전정지지진(Safe Shutdown Earthquake, SSE)이 설계하중으로 작용하였을 때 부재에 미치는 영향을 평가하였다. 해석대상은 유한요소법을 사용하여 수학적 모델링을 완성하였고, 층응답스펙트럼(Floor Response Spectrum, FRS)에 따른 지진하중과 사하중 등을 적용하여 해석을 수행하였다. 해석된 해수여과장치의 최대변위는 OBE 조건에서 2.5mm이고, SSE 조건에서 최대변위는 4.6mm이다. 최대응력은 OBE 조건에서 24MPa, SSE 조건에서 44MPa이며, 이 값은 재료의 항복강도의 각각 18%, 27% 수준이다. 이에 따라 지진하중 조건에 따른 해수여과장치의 구조적 안전성이 제시되었다.

• Toxicological Research
• /
• 제16권4호
• /
• pp.285-291
• /
• 2000

So far, investigation of environmental pollution has been achieved in field study. This remains the most exhaustive approach, current dimensions of environmental researches and their inherent complexity require that relatively inexpensive and simple laboratory procedures are developed to make possible the screening of large numbers of sites and samples. At this point. microbioassay has been high-lighted. The purpose of this study is to evaluate the water pollution using microbioassay. Two microbioassay methods were optimized and validated for the sensitive and quantitative determination of total toxic effects in the water. EROD(Ethoxyresorufin-O-deethylase) microbioassay was focused to detect PARs, PCBs and dioxinlike components in the water and E-screen assay to xenoestrogens. The EROD microbioassay was executed in rat hepatoma cell line, H4IIE and E-screen assay in MCF7-BUS cell line. Kumho river was selected for this study. 5ι of river water was extracted using combined solid-phase extraction in static adsorption mode with soxhlet extraction. Pollutants adsorbed to the XAD-4 resin were recovered by elution with ethyl acetate and methylene chloride (1 : 9). Toxic effects of extracts were determined by EROD-microbioassay and E-screen assay. EROD activities of water samples were 7.24-72.24 ng/ι MEQ. The estrogenic effect of various water samples is quantitatively evaluated by EEQ. The EEQ of samples range from 0.05 to 6.07 ng-EEQ/ι. These results suggested that Kumho river was highly polluted with organic toxic chemicals.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제12권1호
• /
• pp.21-29
• /
• 2004

This paper is to study the heat transfer performance of the copper-water heat pipe with screen wicks. Recently, the semiconductor capacity of an electronic unit becomes larger, but its size becomes much smaller. As a result, a high- performance cooling system is needed. Experimental variables are inclination angles, temperatures of cooling waters and the mesh number of screen wicks. The distilled water was used as a working fluid. Based on the experimental results, when the copper-water heat pipe of 6mm diameter is used at the top heat mode, the heat transfer performance of 100 mesh 2 layers heat pipe is better than that of 150 and 200 mesh. The thermal resistance of the two layers with the 100-mesh screen was 0.7-$0.8^{\circ}C$/W.

• 한국수산과학회지
• /
• 제5권2호
• /
• pp.50-56
• /
• 1972

기포막을 이용한 어구 어법을 고안할 목적으로 각종 기포막으로 해산어의 반응을 관찰한 결과는 다음과 같다. 1. 기포막으로 어군의 진로 차단 및 구집이 가능했다. 2. 송기 압력 $0.160kg/cm^2$일 때, 기포 발생용 파이프 내압이 $0.087kg/cm^2$ 이상일 때는 기포막이 순조롭게 형성되었고, 송기 압력 $0.087kg/cm^2$일 때, 그 내압이 $0.018kg/cm^2$ 이하이면 침수되었다. 3. 효율적인 기포막을 형성하기 위해서는 수심 80cm, 송기 압력 $0.160kg/cm^2$에서는 구멍 크기 $\phi$ 0.3mm 간격 30cm가 가장 효과적이었다(Table 2).

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.572-578
• /
• 2001

This study is to research the heat transfer characteristics in copper-water heat pipes with screen wick, #100. Recently, the semiconductor capacity of an electronic unit has been larger, on the contrary, its size is smaller than before. As a result, a high-performance cooling system is needed. Experimental variables are inclination angle and temperature of cooling water. The distilled water was used for the working fluid. At a inclination angle ${-6}^{\circ}$, #100 2layer screen mesh is shown the best heat transfer performance.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.48-53
• /
• 2001

This experimental study is to research heat transfer characteristics in copper-water heat pipes with screen wick, the 150 and 200-mesh. Recent advances in the miniaturization and large capacity of electronic devices have had a major impact on the design of electronic equipment. As a result, a high-performance cooling system is needed. Experimental variables are inclination angle, number of layer and temperature of cooling water. The distilled water was used for the working fluid. At a inclination angle $6^{\circ}$, the 200-mesh screen wick 3-layer is shown the best heat transfer performance.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2003년도 학술발표논문집
• /
• pp.335-338
• /
• 2003

The Self-Controlled Screen which removed canal underwear garbage in order to prevent the damage of the arable land that increased by a typhoon and a concentration precipitation was developed. A method to remove garbage let communicate the force that a water mill was run by water pressure in the canal, and occurred in a water mill to Rake, and to have walked on a screen was adopted. As a result of was designed by structure calculation, and was made, and having installed in an experimental laboratory, operation was able to know that was become smoothly well. Afterwards, It is going to test for model development of a water mill to be able to more very generate an influence and force to reach to a canal.

• 한국소음진동공학회논문집
• /
• 제22권7호
• /
• pp.599-604
• /
• 2012

In this study, the safety of the driving gear reducer of ESW(essential service water) traveling sea water screen was evaluated through seismic analysis. Mode analysis of gear reducer was performed for reliability of analysis. Seismic analysis was performed in operating basis earthquake(OBE) and safe shutdown earthquake(SSE), which were applied as design condition using floor response spectrum( FRS). The maximum strain of gear reducer under OBE and SSE were 20.4 ${\mu}$ and 33.6 ${\mu}$, respectively. The maximum stresses were 2.42 MPa under OBE condition and 4.36 MPa under SSE condition, which were smaller than the allowable strength of material.