• 한국축산식품학회지
• /
• 제38권4호
• /
• pp.823-828
• /
• 2018

The purpose of this study was to evaluate the suitability of the released water (RW) method for measuring water-holding capacity (WHC) by pressure and filter-paper absorption within two thin plastic films. One hundred fifty pork loins with considerable variations in WHC (three pork qualities: PSE, pale, soft, and exudative; RFN, reddish-pink, firm, and nonexudative; and DFD, dark, firm, and dry; 50 pork loins in each pork quality group) were used to measure drip loss (DL)% and RW % after applying different loads (1.5, 2.0, 2.5, 3.0 and 3.5 kg). Percentages of DL and RW were significantly (p<0.05) different among pork quality groups. The RW % of 2.5 kg load sample was significantly (p<0.05) higher than that of 2.0 kg or 1.5 kg load sample. However, there were no significant (p>0.05) differences in RW % among 2.5 kg, 3.0 kg, and 3.5 kg load samples for all three pork quality groups. The RW % was highly and positively correlated (r>0.95; p<0.001) with DL %. The highest correlation was observed between DL % and RW % of 2.5 kg load sample (r=0.97; p<0.001). Among all RW loads within each quality groups, the highest correlation between DL % and RW % was observed for 2.5 kg load sample (r=0.43, 0.66, and 0.46 for PSE, RFN and DFD quality groups, respectively, p<0.001). These results imply that applying 2.5 kg load is the best for determination of RW %. It is recommended as a reference method to assess DL % of pork muscles.

• 자원ㆍ환경경제연구
• /
• 제24권2호
• /
• pp.435-461
• /
• 2015

본 연구는 최근 신규용수항목으로 인정된 환경개선용수 공급에 따른 편익을 경북 영덕군 영덕오십천을 사례로 조건부가치측정법(CVM)을 적용하여 측정하였다. 기존 CVM 방법론에 여행비용접근의 주요변수인 거리변수를 포함하여 시장영역을 설정하는데 활용하였으며, CV문항에 대한 저항응답들을 지불의사(WTP) 응답과 결합추정하여 잠재적 편의를 줄이고자 하였다. 실증분석결과 대상하천으로부터 먼 거리에 거주할수록 응답자들의 WTP도 적어지는 거리-소멸관계가 나타내었으며, 거리변수의 형태에 따라 WTP변화율도 달랐다. 나아가서 최장거리 거주자 범위 밖에서도 정의 WTP가 측정되어, 전국가구가 수혜자일 수 있음을 확인하였다. 다른 한편으로 전체표본, 저항응답 삭제 그리고 표본선택모형 추정 등 저항응답의 처리에 따라 제시금액 변수의 계수추정치가 상당히 차이가 났고, 결과적으로 표본 WTP도 저항응답 제외 표본은 2,000원 정도로 표본선택모형은 6,000원 정도로 측정되어 3배 정도의 차이가 나타났다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.377-384
• /
• 2000

The characteristics and prediction model of the shear strength for unsaturated residual soils was studied. In order to investigate the influence of the initial water content on the shear strength, unsaturated triaxial tests were carried out varying the initial water content, and the applicability of existing prediction models for the unsaturated shear strength was testified. It was shown that the soil - water characteristic curve and the shear strength of the unsaturated soil varied with the change of the initial water content. A sample compacted in the lower initial water content needs a higher suction to get the same degree of saturation while the shear strength of a sample with the lower initial water content displays a lower value. In order to apply the existing prediction models of the unsaturated shear strength to granite residual soils, a correction coefficient, α, on the internal friction angle, ø'was added.

• 한국산업융합학회 논문집
• /
• 제26권1호
• /
• pp.183-191
• /
• 2023

This study was conducted experimentally to investigate the surface temperature of the heat sink, the air temperature in the flow channel and the sample temperature by changing the channel number of channel type heat sink and the air flow rate when heating and cooling the bio sample. The target temperature of the sample was 15℃ or less as the minimum value and 82℃ or more as the maximum value. In this study, the channel number of the heat sink(N = 1, 2, 4, 5, 10) and the air flow rate(Q=25, 42, 54m³/min) were varied. The bio sample was replaced with water, and the volume of water is 4mL. The size of the heat sink is 80x73x150mm and the material is aluminum. When cooling the sample, the surface temperature, the air temperature and the sample temperature were highly dependent on the number of channels and the flow rate. However, when the sample is heated, the surface temperature, air temperature and sample temperature do not depend on the number of channels and the flow rate. It was found that the conditions for satisfying the minimum temperature of 15℃ or less when cooling the sample were the number of channels N≥5 and the flow rate Q≥42m³/min. When heating the sample, the conditions to satisfy the maximum temperature of 82℃ or more are the number of channels N≤5 and the air flow rate Q≤42m³/min.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2010년도 추계학술발표논문집 2부
• /
• pp.1025-1028
• /
• 2010

The bacteriological examination of spring water in Seogwipo-city was conducted. A total 11 spring water samples were performed from January to April, 2010. During the study period, the range of temperature was from 0.7 to $15.4^{\circ}C$, and result of the analyses showed that hydrogen ion concentrations (pH) for spring water was 0.33 to 7.8. salinity levels for sample average of 0.5 to 1.04‰, as the result of measuring dissolved oxygen (DO) for spring water showed that water dissolved oxygen were 1.02 to 7.14 mg/${\ell}$. The range of total coliform of spring water sample at 11 stations located in the designated spring water were <1.8~>1,600 MPN/100mL. And the range of geometric mean of total coliform were 1.9~117.1 MPN/100mL, The range of fecal coliform of spring water sample at 11 stations located in the designated spring water were <1.8~>1,600 MPN/100mL. And the range of geometric mean of fecal coliform were 1.8~68.1 MPN/100mL, respectively. Level of microbial contamination was examined in 11 samples for indication of bacterial contamination such as heterophic bacteria, EscherichiacoliO157;H7, salmonella spp., Vibrio parahaemolyticus, Staphylococcus aureus, Shigella spp. Were frequently detected from the spring water. Salmonella spp., S.aureus were detected in the range of $0{\sim}1.0{\times}10^1$, $0{\sim}3.0{\times}10^1$ CFU/ml, respectively. And the Escherichia coli O157;H7, Vibrio parahaemolyticus, Shigella spp. Were not detected from the examined spring water samples.

• 한국식품과학회지
• /
• 제27권2호
• /
• pp.147-150
• /
• 1995

새로운 DF 소재 개발을 위하여 표고버섯 균사체 발효 후 산출되는 식이섬유의 물리적 특성을 검토한 결과 일반성분의 함량은 조단백질 16.16%, 조지방 2.96%, 조회분 3.25% 그리고 탄수화물은 77.63%로 나타났으며 total dietary fiber는 54.5%이었다 물리적 특성으로 40 mesh pass에서 보수성은 7.39g water/g sample이며, 보유성은 2.03g oil/g sample이다. 또 $40{\sim}80{\;}mesh$에서 보수성은 평균 7.80g water/g sample이며, 보유성은 2.77g oil/g sample로 나타났다. 한편 안정제로 사용되는 pectin을 첨가한 점도변화에서 식이섬유의 입자크기에 관계없이 pectin의 사용량이 증가할수록 점도가 증가하는 경향이다.

• Water Engineering Research
• /
• 제1권1호
• /
• pp.63-74
• /
• 2000

This paper presents a two- phase search scheme for optimal pipe expansion of expansion of existing water distribution systems. In pipe network problems, link flows affect the total cost of the system because the link flows are not uniquely determined for various pipe diameters. The two-phase search scheme based on stochastic optimization scheme is suggested to determine the optimal link flows which make the optimal design of existing pipe network. A sample pipe network is employed to test the proposed method. Once the best tree network is obtained, the link flows are perturbed to find a near global optimum over the whole feasible region. It should be noted that in the perturbation stage the loop flows obtained form the sample existing network are employed as the initial loop flows of the proposed method. It has been also found that the relationship of cost-hydraulic gradient for pipe expansion of existing network affects the total cost of the sample network. The results show that the proposed method can yield a lower cost design than the conventional design method and that the proposed method can be efficiently used to design the pipe expansion of existing water distribution systems.

• Bulletin of the Korean Chemical Society
• /
• 제23권1호
• /
• pp.71-74
• /
• 2002

The apparent barrier height for charge transfer through an interfacial water layer between a Pt/Ir tip and a gold surface has been measured using STM technique. The average thickness of the interfacial water layer inside an STM junction was controlled by the amount of moisture. A thin water layer on the surface was formed when relative humidity was in the range of 10 to 80%. In such a case, electron tunneling through the thin water layer became the majority of charge transfers. The value of the barrier height for the electron tunneling was determined to be 0.95 eV from the current vs. distance curve, which was independent of the tip-sample distance. On the other hand, the apparent barrier height for charge transfer showed a dependence on tip-sample distance in the bias range of 0.1-0.5 V at a relative humidity of approximately 96%. The non-exponentiality for current decay under these conditions has been explained in terms of electron tunneling and electrochemical processes. In addition, the plateau current was observed at a large tip-sample distance, which was caused by electrochemical processes and was dependent on the applied voltage.

• 한국환경보건학회지
• /
• 제34권1호
• /
• pp.95-100
• /
• 2008

An automatic titration system using a PC-camera with a color filter on its lens was used in the $KMnO_4$ consumption test of tap water and distilled water in relation to blank tests. The very faint pink color of titration end point could be effectively detected by using a yellow cellophane paper as a color filter. The average hue value (Havg) of 192 pixels in the image of the sample solution being titrated was computed and followed up at regular time intervals during titration in order to detect the titration end point. The Havg decrease of 2 degrees from the average of first 10 Havgs was regarded as reaching the end point. The volume of 0.01N $KMnO_4$ consumed by a tap water sample was $0.728{\pm}0.022ml$ in manual titration and $0.735{\pm}0.013ml$ in automatic titration (p=0.580). The volume of 0.01N $KMnO_4$ consumed by a distilled water sample was $0.383{\pm}0.015ml$ in manual titration and $0.367{\pm}0.015ml$ in automatic titration (p=0.252). The high p-values for t-test suggested that there were good agreements between manual and automatic titration data and the automatic method proposed in this article was considered to effectively replace the manual titration.

• Earthquakes and Structures
• /
• 제14권2호
• /
• pp.143-153
• /
• 2018

Correlation among different factors must be considered for selection of influencing factors in safety monitoring of high dam including positive correlation of variables. Therefore, a new factor selection method was constructed based on Copula entropy and mutual information theory, which was deduced and optimized. Considering the small sample size in high dam monitoring and distribution of daily monitoring samples, a computing method that avoids causality of structure as much as possible is needed. The two-dimensional normal information diffusion and fuzzy reasoning of pattern recognition field are based on the weight theory, which avoids complicated causes of the studying structure. Hence, it is used to dam safety monitoring field and simplified, which increases sample information appropriately. Next, a complete system integrating high dam monitoring and uncertainty prediction method was established by combining Copula entropy theory and information diffusion theory. Finally, the proposed method was applied in seepage monitoring of Nuozhadu clay core-wall rockfill dam. Its selection of influencing factors and processing of sample data were compared with different models. Results demonstrated that the proposed method increases the prediction accuracy to some extent.