• 상하수도학회지
• /
• 제26권4호
• /
• pp.535-545
• /
• 2012

Recently, drinking water quality has significantly improved with the progress of water treatment technologies, however, customer's trust on tap water is still relatively low. Low trust on water quality is mainly due to vague anxiety. Therefore, to improve customer's trust on drinking water quality new strategy such as water safety plan(WSP) which recommended by WHO and IWA should be introduced. WSP can be defined as an approach which uses comprehensive risk assessment and risk management approach that encompasses all steps in water supply from catchment to consumer to ensure the safety of a drinking water supply. In this study, cases on WSP introduction in other countries as well as strategy for the introduction of WSP in Korea were investigated. In addition, recommendations on the improvement of the current water contamination response manual was suggested based on the analysis of the existing manual at a full scale water treatment plant.

• 한국안전학회지
• /
• 제27권5호
• /
• pp.135-140
• /
• 2012

In this study, the behavior of pollutant was calculated at Paldang reservior according to several scenarios of the accidental water pollution by means of the numerical models for forecasting water quality. Also managemental plans for situation of the accidental water pollution happening at Paldang watershed were simulated. According to the simulating results, a plan of increase of discharge at Cheongpyeong dam reduced the peak concentration of pollutants, whereas extended the time for stopping water intake. Another plan, drop of water elevation at Paldang dam, decreased seriously the time for stopping water intake although there were a little effect to decrease the peak concentration. Thus it was concluded that appropriate combinations of the plans for the increase discharge and the dropping water elevation should be used to deal with the accidental water pollution at Paldang watershed.

• 환경위생공학
• /
• 제20권3호
• /
• pp.51-56
• /
• 2005

Allocation of water pollution load from loading capacity can be much essential, controversial, and its standards can be applied case-by-case to the various situations. Allocation methods to point sources are generally 'Equal effluent concentration', 'Equal percent Treatment', Loading capacity at planning stage consists of basic pollution load, development pollution load, reserved pollution load and margin of safety. But at the implementing stage loading capacity can be consisted of allocatable load and margin of safety to give more flexibility in the total water pollution load management plan. In that case, we can re-adjust and altogether use the pollution load of point sources of series and non-point sources at the implementing stage.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2004년도 유체기계 연구개발 발표회 논문집
• /
• pp.199-207
• /
• 2004

Water supply facilities are recently getting larger according as domestic waterworks become multi regional water supply system. Large water supply facilities generally consist of the intake pumping station, water treatment station and water supply & distribution facilities. Although pumping stations and pipeline systems are used to pump up water, it often happens pipeline damage and flooding accident by the water hammer. As a result of this study, a pumping station is guaranteed by the computer simulation and field test analysis. Therefore these are contributed safety operation in pumping station through adjustment of the pumping station safety plan, air valve and valve closing time.

• 한국안전학회지
• /
• 제21권6호
• /
• pp.33-37
• /
• 2006

Underwater lighting is installed in water tanks, fountains and pools in waterparks, it has direct contact with water and in case of any electrical failure due to faults from electrical equipment, there is a lot of electrical shock risk. In this paper, we proposed an improvement plan of the standard of judgment of electrical code which is MOCIE (Ministry of Commerce, Industry and Energy) notification by fact finding survey and analysis of the domestic and foreign codes.

• 한국물환경학회지
• /
• 제22권6호
• /
• pp.977-981
• /
• 2006

In order to improve water quality in drinking water sources, Ministry of Environment (MOE) was implemented total water pollution load management (TWPLM) in all the major river basins. From the experience of the application of TWPLM, we could find some problems relating the target watershed, standard operating procedure (SOP) of establishment and implementation plan, water quality and flow rate, design flow, water quality model, margin of safety (MOS), and estimation of wasteload were found. The authors were reviewed ongoing TWPLM and presented the improvement schemes for a successful TWPLM. For the application of these suggestions, further detailed studies should be done to implement TWPLM in the future.

• 한국지반신소재학회논문집
• /
• 제20권1호
• /
• pp.45-55
• /
• 2021

본 연구에서는 수치해석모형을 통하여 수위변동시 필댐의 거동 특성을 분석하고 저수지의 안전관리 방안을 고찰하였다. 수치해석 프로그램(GTS NX 및 LIQCA)을 이용하여 필댐의 상·하류측 Shell 및 Core에서 수위승강에 따른 소성전단변형률, 수평변위, 응력경로, 간극수압 등을 분석하였다. 제체의 거동을 분석한 결과, 제체 내의 수위가 빠른 속도로 상승하면 간극수압 및 변위 또한 급격하게 증가하는데, 수위의 상승은 제체 내의 간극수압 증가와 제체의 포화도 증가를 유발하며, 제체의 유효응력을 감소시키는 것으로 나타났다. 이러한 수위승강 시 필댐의 거동 특성은 제체의 강도 및 강성이 저하되는 원인이 되고, 침투로 인해 발생하는 제체의 변형에 의해 소성전단변형률이 축적되어 변위 증가를 유발하는 것으로 판단된다. 본 연구를 통해 저수지의 정밀안전진단 상태평가 기준 개선안을 제안하였으며, 향후 저수지 안전진단지침 개정안 마련 시 기초자료로 활용될 수 있을 것으로 판단된다.

• 한국유체기계학회 논문집
• /
• 제8권5호
• /
• pp.22-28
• /
• 2005

As the water supply facilities are recently getting larger, the domestic waterworks become multi-regional water supply system. Large water supply facilities generally consist of the intake pumping station, water treatment plant and water supply/distribution facilities. Although the pumping stations and the pipeline systems are used to pump up water, it often happens pipeline damage and flooding accident by the water hammer. In this paper, the intake pumping station is guaranteed by both the computer simulation and the field test analysis. This study is contributed to the safe operation program for the pumping station in which results of the adjustment on the safety plan of the pumping station, the air valve and the valve closing time.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 추계학술대회 논문집
• /
• pp.266-271
• /
• 2003

Many port states such as New Zealand. the USA. Australia and Canada have strict regulations to prevent ships which arrive in their port from discharging polluted ballast water which contain harmful aquatic organism and pathogens. They are notified that transfer of polluted ballast water can cause serious injury to public health and damage to property and environment. For this reason. they perceived that the ballast exchange in deep sea is the most effective method. together with submitting the ballast management plan which contains the effective exchange method. ballast system and safety consideration. In this study, we make an effort to develop optimum ballast water exchange management and in result of that. it provide more convenient and stable process to prepare ballast water management plan for Bulk Carrier.

• 한국수자원학회논문집
• /
• 제57권1호
• /
• pp.21-33
• /
• 2024

최근 기후변화로 영향으로 재해의 양상이 다양화 및 대형화되고 있다. 이에 우리나라는 안전한 치수계획을 세우기 위해 수자원장기종합계획에서 홍수위험도 평가를 위해 홍수피해잠재능(Potential Flood Damage, PFD)의 개념이 도입되었다. 하지만, PFD의 문제점이 제기되면서 다양한 연구들이 진행되어왔다. 선행연구 대부분 PFD 인자를 수정·보완하거나 인자를 새로 추가하는 연구들이 진행되었다. 본 연구는 위험성 인자를 내포하고 있는 홍수위험지도를 사용하여 기존의 치수안전도 평가방법을 개선하고, 대상지역인 영·섬진강권역을 중심으로 평가하고자 한다. 본 연구에서 제시한 평가방법은 위험성 요소 및 잠재성 요소 분석, PFD 및 홍수방어수준 분석, 치수안전도 평가로 크게 3가지로 제시하였다. 본 연구에서 제시한 개선된 평가방법은 각종 치수안전도 평가 및 치수계획 수립시 활용될 것으로 기대된다.