• 한국자동차공학회논문집
• /
• 제11권1호
• /
• pp.7-17
• /
• 2003

Highly accurate control of an air-fuel ratio is very important to reduce exhaust gas emissions of gaseous-fuel engines. In order to achieve this purpose, a precise engine model is required to estimate engine performance from the engine design process which is applied to the design of an engine controller. Engine dynamics are considered to develop a dynamic engine model of a gaseous-fuel engine. An effective air mass ratio is proposed to study variations of the engine dynamics according to the water vapor and the gaseous-fuel in the mixture. The dynamic engine model is validated with the LPG engine under steady and transient operating conditions. The experimental results in the LPG gaseous-fuel engine show that the estimation of the air flow and the air-fuel ratio based upon the effective air mass ratio is more accurate than that of a normal engine model.

• 한국강구조학회 논문집
• /
• 제14권6호
• /
• pp.765-772
• /
• 2002

초고층 건물의 가속도 레벨을 줄이기 위해서 TMD, TLD, VED와 같은 다양한 진동제어장치들이 많은 국내외 연구자들에 의해 연구되고 있다. TLD는 다른 제진장치에 비해 설치의 간편함 및 유지비용이 저렴한 장점이 있다. 그러나 물의 요동을 평가함에 있어서 어려움이 있으므로 동조액체댐퍼의 동적특성에 대한 실험 및 해석적 검증이 필요하다. 본 연구에서는 TLD를 100층 규모의 초고층건물에 설치할 경우를 상정하여 자유진동실험과 백색잡음을 이용한 강제진동실험을 통하여 TLD의 제진성능을 확인하고자 하였다. TLD의 질량비, 감쇠네트수, TLD 형상비 등을 주요실험변수로 설정하였으며, 물탱크를 설치한 건물의 반응값들이 건물 단독인 경우보다 적게 나타남을 알 수 있었다. 또한 질량비, 감쇠네트, 형상비가 커질수록 감쇠성능이 개선됨을 알 수 있었다.

• Journal of Biosystems Engineering
• /
• 제23권5호
• /
• pp.445-456
• /
• 1998

This study was carried out to evaluate the performance of a medium scale rice polisher of 2.5 t/h and to improve its performance for producing the clean rice with high quality. The maximum internal pressure, broken rice ratio. whiteness in the rice polisher were investigated, and the effects of outlet resistance, water spraying rate, shaft revolution speed and rice moisture content on the polishing performance were analyzed to find out proper operating conditions. The conclusions of this study were as follows: 1. In the performance evaluation of the polisher, the broken rice ratio increment of 0.1%, the max. internal pressure of about 11 N/${cm}^2$, and whiteness increment of 2.2~3.7 resulted at the conditions of 20 PS driving power, 950 rpm, 150 cc/min water spraying rate, 44.1 Nㆍcm outlet resistance and about 15% rice moisture content. 2. Though max. internal pressure and whiteness at the 17% rice moisture content were higher than those at the 15% moisture content under the same operating conditions of the polisher, but the broken rice rate at the 17% moisture content was absolutely low compared with that at 15% moisture content. The water spraying effect to reduce broken rice and to increase whiteness was much significant at the 15% moisture content not significant at 17% moisture content. 3. The main parameter of the performance was outlet resistance, and low resistance of about 44.1 Nㆍcm was recommended at the polisher. 4. The proper water spraying rate in the polisher was about 150 cc/min. 5. As the shaft revolution speed decreased from 950 rpm and 800 rpm to 650 rpm, the broken rice ratio increased and whiteness decreased. 6. As the driving power of the polisher increased from 20 PS to 30 PS, the max. internal pressure decreased by about 1~2.5 N/${cm}^2$ and whiteness increased by about 1~2, but the broken rice rate was not changed. 7. The proper operating conditions of the polisher seemed to be the revolution speed of 800-950 rpm, the water spraying rate of about 150 cc/min, the oulet resistance of about 44.1 N.cm and 30 PS driving power.

• Fibers and Polymers
• /
• 제6권2호
• /
• pp.162-168
• /
• 2005

A methodology for the objective evaluation of water repellency is studied using image analysis of the sprayed pattern on woven fabrics according to a standard spray test (AATCC Test Method 22-2001). The wet area ratio obtained from the spray standard test ranking is found to be exponentially related with its water repellency rating. Mean filtering is used to remove the effect of weave texture and the transmitted light through interyarn spaces. The ring frame of the instrument and wet region are recognized using Otsu thresholding technique. And Hough transform and outline operation are used to obtain the size and position of the ring frame. The objective assessment of the water repellency using image processing can reduce unnecessary confusion in the subjective determination of the water repellency.

• Nuclear Engineering and Technology
• /
• 제33권5호
• /
• pp.483-497
• /
• 2001

In this work, a neuro-fuzzy inference system combined with the wavelet denoising, PCA (principal component analysis) and SPRT (sequential probability ratio test) methods is developed to detect the relevant sensor failure using other sensor signals. The wavelet denoising technique is applied to remove noise components in input signals into the neuro-fuzzy system The PCA is used to reduce the dimension of an input space without losing a significant amount of information. The PCA makes easy the selection of the input signals into the neuro-fuzzy system. Also, a lower dimensional input space usually reduces the time necessary to train a neuro-fuzzy system. The parameters of the neuro-fuzzy inference system which estimates the relevant sensor signal are optimized by a genetic algorithm and a least-squares algorithm. The residuals between the estimated signals and the measured signals are used to detect whether the sensors are failed or not. The SPRT is used in this failure detection algorithm. The proposed sensor-monitoring algorithm was verified through applications to the pressurizer water level and the hot-leg flowrate sensors in pressurized water reactors.

• 대한환경공학회지
• /
• 제33권6호
• /
• pp.432-438
• /
• 2011

현재 국내 정수지 도류벽은 형태와 장폭비에 대한 명확한 기준이 없고 장폭비가 너무 작아 소독능을 만족하지 못하거나 지나치게 큰 장폭비로 비경제적인 설계를 하는 등 많은 혼란을 겪고 있어 수리적으로 유리한 도류벽의 형태와 경제적인 장폭비를 결정하는 것이 시급한 실정이다. 본 연구는 다양한 도류벽의 형태와 장폭비에 대해 전산유체역학 기법을 활용하여 수리적으로 가장 유리한 도류벽의 형태를 제시하고 가장 경제적인 장폭비를 도출하였다. 연구결과, 정수지내 도류벽의 형태는 동일한 형태와 구조라 하더라도 수류의 방향전환 횟수가 적은 구조가 수리적으로 유리하다. 둘째, 최적 도류벽 형태는 좌우 우류식(model 2)이며 최악의 형태는 두 방향으로 분산되고 다시 모아지는 분산형(model 4) 형태이다. 좌우 우류식은 분산형보다 도류벽의 개수를 67% 정도 줄일 수 있다. 셋째, 좌우 우류식 도류벽인 경우 경제적인 장폭비는 30~50이며 50을 초과할 경우 공사비 대비 $T_{10}/T$ 값의 증가량이 미미하여 경제적이지 못하다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.1167-1171
• /
• 1993

A highly efficient hydropneumatic water supply system type BGY is designed and built in accordance with ISO standard. The technical features of BYG type pump unit can be summarized as follows: - reduce hydropneumatic tank capacity at the ratio of 1/10 - 1/30 compared with conventional method. - ISO standard pumps can be used. - the development of highly efficient water supply system type BYG is based on long-term experiences with the proven constant pressure water supply technique which minimize pressure fluctuation, rapid pilsation, etc. The text contains the operation principle of BYG type water supply system, introduction of closed cycle control process focused on Mini PC and experimental results of type BYG-IVS-90x45.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.617-620
• /
• 1999

To reduce the consumption of chemicals and ultra pure water(UPW) in cleaning process used in device manufacturing, we proposed wet processes that use electrolytic ionized water(EIW), which is generated by electrolysis of a diluted electrolyte solution or UPW and systemically investicate the EIW\`s characteristics. EIW\`s pH values are increased in cathode chamber and decreased in anode chamber according to the electrolysis time and its varied ratio is reduced with time increasement. The variation of pH and ORP is increased accordin to the applied voltage until critical voltage. But more than that voltage, the variation is decreased because of ion\`s scattering effect. When electrolyte is added, the effects of electrolysis is increased because electrolyte acts as catalyst. But when the density of electrolyte is increased more than critical value, ion\`s flowage is obstructed and the effects of electrolysis is decreased.

• Mass Spectrometry Letters
• /
• 제12권3호
• /
• pp.106-111
• /
• 2021

Several pretreatment methods have been developed to reduce the inorganic arsenic, which is known to be highly harmful to humans, among various arsenic species present in hijiki and rice. The pretreatment methods were selected and developed as methods that can be non-harmful even after treatment and easily applied. Hijiki was applied by two methods. One was soaking in water at room temperature for various durations and the other was boiling of it in water for a short period of time. Rice was soaked in water with different rice-to-water ratios for various durations. The most effective method that reduced the inorganic arsenic in hijiki was to repeat parboiling for 5 minutes twice, which led to 79% reduction of the inorganic arsenic in it. In the case of rice, soaking for 24 hours at the ratio of 1:5 (rice:water) resulted in 51% reduction of inorganic arsenic in rice.

• 상하수도학회지
• /
• 제27권2호
• /
• pp.241-249
• /
• 2013

Ethanolamine (ETA) is widely used for alkalinization of water in steam cycles of nuclear power plants with pressurized water reactor. When ETA contained wastewater was released, it could increase COD and T-N. The treatment of the COD and T-N from ETA wastewater was investigated using the GAC as particle electrodes in three-dimensional electrode reactor (TDE). This study evaluated the effectiveness of GAC as particle electrode using different packing ratio at 300 V. The results showed that GAC-TDE could reduce ETA much more efficiently than ZVI-TDE at the mass ratio of GAC to insulator, 1:2. Additionally, The effect of applied electric potential to COD and T-N reduction was investigated. The results showed the high COD, T-N reduction and current efficiency at the low electric potential. Using the GAC-TDE will provide a better ETA reduction with reducing electrical potential dissipation.