• KIEAE Journal
• /
• 제12권5호
• /
• pp.11-20
• /
• 2012

In this paper, we analyze the existing ecovillages in order to establish a planned-ecovillage model to suggest improvement in direction of ecovillage planning; namely, efficiency of planning elements through analysis of changes in ecovillages. Changes to living environment require increased relaxation and convenience to ensure quality of life. Unlike general ecovillages, planned-ecovillages differ in their introduction of planning elements by autonomous decision-making through discussions and meetings among residents. In the village planning process, complex planning, community facilities, ecology-base facilities, water-resource utilization, and waste disposal can waver from initial planning, giving rise to realistic alternatives to village characteristics for those considering changes to space organization.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1991년도 봄 학술발표회 논문집
• /
• pp.29-32
• /
• 1991

This is the study on the performance of workability and engneering properties of flowing concrete using the superplasticizers, which are being used for control of the consistency of fresh concrete without modifying the properties of the hardened concrete and for production of high quality concrete at a low water-cement ratio. It is the aim of this study to analyze and investigate workability and engineering properties of flowing concrete according to the addition rate in poor and rich mix proportions of base concrete. Base on this fundamental investigation for the development of flowing concrete mix design, it could be drawn that the workability and engineering properties of flowing concreteare influenced greatly by mix proportion and dosage of superplasticizers.

• 한국인쇄학회지
• /
• 제22권2호
• /
• pp.1-12
• /
• 2004

In lithography based on repulsion of ink and water emulsification is inevitably generated. Thus it is necessary to analyze relationship between printability and physical and chemical properties of emulsified ink. Transfer rate of ink is one of the important factor deciding print quality. And it is closely concerned with rheological properties of emulsified ink. Rheological properties such as flow, yield, plastic viscosity, creep, oscillation and tack tests were measured. In order to examine printability of emulsified ink, ink transfer equations, density, ink film thickness and gloss were measured.

• Journal of information and communication convergence engineering
• /
• 제7권4호
• /
• pp.465-468
• /
• 2009

There is to solution the environmental data which the importance is seriously taken into consideration in the the 21st century that is set up whether or not be a welfare society advanced country according to quality of life elevations through environments in question to a preferential assignment for an environmental control will decrease of measures, and be proceeded so as to be urgent. However, shall get measurement of a correct environmental pollution duty and reduction measures stopped on bases of the data which there is reliability, and decrease excessive pollution than what, and may overcome efficiency of waste of cost environmental pollution management. Environmental pollution data collected are regarded as important, and, specially, a collection of environmental data forecast a pollution circle, or to analyze future development is important very at an environmental policy decision or decision making step to be national besides pollution reductions.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 추계 학술논문 발표대회
• /
• pp.217-218
• /
• 2011

The advantages of blast-furnace slag concrete may include lower hydration heating velocity, restraint on concrete temperature increase, long-age strength improvement due to latent hydraulic reaction, improved water tightness, and repulsion to chemical erosion. These advantages contribute to the high quality of the blast-furnace slag concrete. However, the blast-furnace slag concrete has its limitations as well. These disadvantages may include retarded setting and elongated retention of mold due to the weak strength of early-age. Nevertheless, much research is currently under way to improve the aforementioned issues. To improve activity of blast furnace slag powder, alkaline irritants has been used. In this study, we analyze effect on activity fineness and rate of substitution of Alkali Activator toward activity.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 추계 학술논문 발표대회
• /
• pp.100-101
• /
• 2016

The fineness degree of Ordinary Portland Cement (OPC henceforth) usually used in Korea's construction sites, is designated as over 2,800㎠/g. But the higher the fineness, the surface area of hydration reaction on water increases as well, resulting in large early age strength and high-intensity; so the trend is to prefer a high degree of fineness. But from a pore-space filling perspective, fine-particled cement is not always beneficial to intensity. Therefore in this study artificial modifications were given to cement fineness to analyze the effect of various fineness changes on the liquidity, air quantity and intensity of lean mixture cement mortar. As a result, the greater the degree of fineness, the better the cement was, with fine particle+OPC having the most satisfactory results due to consecutive particle distribution.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.381-382
• /
• 2008

$TiO_2$ colloidal solution was electrosprayed for preparing a conductive thin film with high quality. Electrospray is a technique of liquid dispersion electrically and a good method of manufacturing nanoparticle, nanofiber, porous membrane, film preparation and coating. Water and ethanol were used as solvents and their mixing ratio was varied for studying the influence of solvent volatile on nanoparticle dispersion. Various nozzles to control the thru-put of solutions.were examined. Integrated analytical method and scanning electron microscope were used to analyze integrity and microscopic images.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권2호
• /
• pp.346-363
• /
• 2015

We have performed integrated dynamics modeling for a supercavitating vehicle. A 6-DOF equation of motion was constructed by defining the forces and moments acting on the supercavitating body surface that contacted water. The wetted area was obtained by calculating the cavity size and axis. Cavity dynamics were determined to obtain the cavity profile for calculating the wetted area. Subsequently, the forces and moments acting on each wetted part-the cavitator, fins, and vehicle body-were obtained by physical modeling. The planing force-the interaction force between the vehicle transom and cavity wall-was calculated using the apparent mass of the immersed vehicle transom. We integrated each model and constructed an equation of motion for the supercavitating system. We performed numerical simulations using the integrated dynamics model to analyze the characteristics of the supercavitating system and validate the modeling completeness. Our research enables the design of high-quality controllers and optimal supercavitating systems.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.75-76
• /
• 2017

In this study, it is speculated that the special admixture can be mixed with ERCO beforehand to prevent adsorption of cement and AE at the time of contamination together with water, and the change in the amount of special admixture preliminarily added to ERCO We will try to analyze the influence on normal strength mortar. As a result, the flow quantity, the air quantity, the compressive strength and the flexural strength were improved as the added amount of the special admixture was increased, and When the special admixture with the addition amount of ERCO 3% was added, the strength was rather lowered. Therefore, it was found that the optimum amount of special admixture added to ERCO was 2%.

• 수산해양교육연구
• /
• 제16권2호
• /
• pp.227-237
• /
• 2004

Recently development trends in information technology expand the activity boundaries for human living beyond coastal zones. These rapid changes of paradigm are stimulating scientists and strategists to be encouraged in making adequate model for marine geographic information system (MGIS) and their applications. Coastal zones are places which are affected by many factors, such as water quality, tide, wave, atmosphere, population, industry, etc. Therefore information related to the coast has to be integrated and analyzed for managing it efficiently. GIS-based Ocean Informatics is suited for those purposes and used in the study for establishing and managing coastal geographic and environmental information system. This paper reviews the properties of ocean and coastal spaces, then defines some MGIS related terminologies for clarifying the scope of MGIS boundaries. In this study, coastal geographic information is established by digital geographic information and digital terrain information. Digital coast chart having information on digital chart and map can merge and analyze various coastal information and can be a useful tool for the coastal integrated management.