• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2014년도 춘계학술대회
• /
• pp.807-809
• /
• 2014

수자원관리의 패러다임은 기존의 댐 위주에서 모든 수계를 종합적으로 분석하여, 수량, 수질, 방재 등을 종합적으로 분석하고 관리하는 쪽으로 변화하고 있다. K-water는 4대강 및 다목적댐 등을 위주로 하는 유역통합물관리가 실현되고 있으며, 이러한 수자원 통합관리를 위한 정보통신시스템은 사용자 중심의 수도 발전 댐 관리 등을 전자적으로 수행할 수 있도록 구축되어 있다. 정보통신시스템을 구성하는 제어시스템은 설비의 동작을 관리 제어하는 시스템으로 하부 센서 및 필드에서 수집된 데이터를 바탕으로 정보를 저장하고, 원격에서 설비를 제어하는 기능을 하고 있다. 따라서 본 논문에서는 댐 보등 수자원분야의 통합관리를 위한 정보통신시스템 구축방안에 대해 알아보고 최적의 시스템 구축방안 및 시스템의 보안취약부분에 대해 알아보고자 한다.

• 한국도시환경학회지
• /
• 제18권4호
• /
• pp.401-408
• /
• 2018

하수처리 공정모델링 소프트웨어인 EQPS(Effluent Quality Prediction System, Dynamita, France)를 적용하여 A하수처리시설 생물반응조 설계의 적합성을 분석하였다. A하수처리장은 친수용수 수준의 목표수질을 준수하기 위하여 이차침전지 유출수 설계농도를 총질소와 총인, 각 10 mg/L, 1.8 mg/L로 설정하여 설계하였다. 4-Stage BNR 공정인 반응조의 체류시간은 총 9.6시간으로 전무산소조 0.5, 혐기조 1.0, 무산소조 2.9, 호기조 5.2시간이었다. 동절기 공정모델링 결과 친수용수 수준의 목표수질을 만족하기 위하여 혐기조의 체류시간을 0.2시간 늘렸고 당초 설계조건이던 외부탄소원 비상시 주입을 상시적으로 주입해야 하는 것으로 조사되었다. 모델링 결과의 왜곡을 배제하기 위하여 소프트웨어 제조사가 제시한 one step nitrification denitrification 모델의 Default 계수를 사용하였다. 공정모델링은 대체적으로 최적의 상태를 제시하기 때문에 생물반응조 여유율을 고려하면 4-Stage BNR의 체류시간은 9.8시간보다 증가시켜야 한다. 하수처리장 설계단계에서 공정 모델링의 정확한 사용은 하수처리장 건설 후 처리성능과 효율의 안정성을 담보할 수 있는 방법이므로 설계단계에서 철저한 평가가 필요하다.

• 한국방재안전학회논문집
• /
• 제12권3호
• /
• pp.35-49
• /
• 2019

현재 한국 내 공공하수처리시설은 2018년 현재 600개 이상 운영 되고 있으며 하수종말처리시설은 법적으로 유입수량이 일일 500톤 이상 설계되어 운영되는 처리시설을 말한다. 마을 하수도는 50톤 이상 500톤 미만 유입되는 소규모 하수처리시설을 의미한다. 그러나 설계유입수량과 수질이 유사한 처리시설은 거의 없다. 이러한 현실은 하수관로의 노후화로 인한 빗물의 유입, 지하수의 침입과 하수관로에 폐수의 무단 투입 등으로 설계유입수량과 수질이 실제 현실과 많이 다른 것은 어쩔 수 없는 현실이다. 본 연구에서는 국내 많은 지역 하수관로 기술진단을 실시한 것 중 대표적 사례 2개소의 하수관로를 선정하여 청천시와 강우시 시간대별 유량 및 BOD 수질분석, 침입수 유량 및 비율 산정을 통해 하수처리시설의 적절한 운영과 하수관로와 그 부속 시설의 노후화 진단평가를 위한 기초자료로 활용하고자 하며, 일일 500톤 이상 공공하수처리시설 유입수 분석을 청천시 주1회 24시간 동안 시간대별 채수 및 분석, 우천시 강우영향일 고려하여 동일시간대 채수 및 분석을 주기적으로 실시하는 것을 제안한다.

• 한국항만학회지
• /
• 제13권1호
• /
• pp.133-146
• /
• 1999

Mokpo coastal area is connected to the adjacent a long river and two large basins. It is essential for port planning coastal zone management and environmental impact study to analyze the data related to the ship operation and variation of current and water quality due to the development of water area including dredging reclamation and estuary barrage. The Yongsan river estuary weir and Yongam-Kumho basins discharge much of water through water gates for the purpose of flood control and prohibit salt intrusion at the inland fresh water area. To meet this purpose discharge through the gates have been done at the period of maximum water level difference between inner river and sea level. This discharged water may cause the changes of current pattern and other environmental influences in the vicinity and inner area of semi-closed Mokpo harbor. In this study ADI method is applied to the governing equation for the analysis of the changes on current pattern due to discharged water. As the results of this study it is known that the discharging operation causes many changes including the increase of current velocity at the front water area at piers approaching passage and anchorages. Discussion made on the point of problems such as restricted maneuverability and the safety of morred vessels at pier and anchorage. To minimize this influence the linked gate operation discharging warning system and laternative mooring system are recommended.

• 한국물환경학회지
• /
• 제33권3호
• /
• pp.282-290
• /
• 2017

A long-term resuspension of small particles, called persistent turbidity, is one of the most important water quality concerns in the dam reservoirs system located in North Han River. Persistent turbidity may incur aesthetic nuisance and harmful effect on the ecosystem health, in addition to elevated water treatment costs for the drinking water supply to the Seoul metropolitan area. These sufferings have been more intensified as the strength and frequency of rainfall events increase by climate change in the basin. This study was to analyze the effect of an extreme turbidity flow event that occurred in 2006 on the serial reservoirs system (Soyang-Uiam-Cheongpyung-Paldang) in North Han River. The CE-QUAL-W2 model was set up and calibrated for the river and reservoirs system using the field data obtained in 2006 and 2007. The results showed that Soyang Reservoir released turbid water, which was classified as the TSS concentration is greater than 25 mg/L, for 334 days with peak TSS of 264.1 mg/L after the extreme flood event (592.7 mm) occurred between July 10 and 18 of 2006. The turbid water departed from Soyang Reservoir reached at the most downstream Paldang Reservoir after about 20 days and sustained for 41 days, which was validated with water treatment plant data. Since the released water from Soyang Reservoir had low water temperature and high TSS, an underflow formed in the downstream reservoirs and vertically mixed at Paldang Reservoir due to dilution by the sufficient inflow from South Han River.

• 생태와환경
• /
• 제43권3호
• /
• pp.385-399
• /
• 2010

본 연구는 금강 수계의 83개 하천 지점에서 이 화학적 수질의 시 공간적 변이를 파악하기 위하여 2003~2007년까지 측정된 환경부의 수질자료를 분석하였다. 이용된 수질 변수는 수온, 용존산소량(DO), 생물학적 산소요구량(BOD), 화학적 산소요구량(COD), 부유물(SS), 총질소(TN), 총인(TP) 및 전기전도도(EC)의 8개 항목으로 이들의 수질특성은 토지이용도, 연별, 계절별, 조사지점별로 큰 변이를 보였다. 각 지점들은 토지이용도에 따라 크게 산림형 하천(Forest stream, Fo), 농지형 하천(Agricultural stream, Ag), 도심형 하천(Urban stream, Ur)의 3가지 유형으로 구분하였다. 대부분의 수질변수들은 장마기인 7~8월 동안 접종강우로 인하여 계절적 변이 폭이 큰 것으로 나타났다. 장마기에 이온 희석현상의 지표로 이용되는 전기전도도와 영양염류인 총질소와 총인은 장마기 강우량과 역상관관계를 보이는 것으로 나타났다. BOD와 COD는 장마기에 크게 감소하는 것으로 나타났으며, 전기전도도, TN, TP 농도의 최소값도 여름철 장마기에 나타났는데, 이는 집중강우로 하천 유량이 증가하여 이온 및 영양염류가 희석되었기 때문으로 사료된다. 이에 반하여 계절별 SS의 농도는 여름철 강우기 동안에 주로 유입되는 것으로 나타났다. 토지이용도에 따른 계절별 수질 특성을 분석한 결과, BOD, COD, TN, TP 및 SS의 농도에서는 괄목할만한 차이를 보였으며, 농지형 하천(Ag)이 산림형 하천(Fo)과 도심형 하천(Ur)에 비하여 BOD, COD, SS의 농도가 더 높은 것으로 나타났으며, 도심형 하천에서 TN, TP의 농도가 더 높게 나타나 수질악화가 심각한 것으로 나타났다. 수계의 수질과 밀접한 상관성을 보이는 것으로 나타났으며, 또한 대전 및 청주의 도심에서 흘러나오는 지천인 갑천과 미호천 등 도심형 하천이 금강 수계 하류의 수질악화에 큰 영향을 주는 것으로 나타나 이런 지류부에서의 효율적인 수질관리가 시급한 것으로 사료되었다.

• 한국인쇄학회지
• /
• 제25권1호
• /
• pp.43-52
• /
• 2007

Offset printing is one of the well known printing technique of lithographic process and consists of image area and 'non-image area on a flat image carrier. The surface tension of dampening water can be controlled by adding IPA after mixing of raw water and etching solution. The etching solution contains a surfactant for reducing surface energy, a clean agent for non-imaging area, wetting agent for protecting non-imaging area from oil components like ink and also an emulsifying agent for controlling emulsification. In this study, the present situation of dampening water maintenance has examined by collecting dampening water using at domestic companies. The pH related to dampening water, conductivity, contact angle, emulsification curve are measured to define the current situation of dampening water control of each companies and to analyze the relationship among measured properties. In the study most of companies among 16 printing companies tested controlling dampening water through pH value. However, the quality of printing has varied depending upon conductivity, contact angle, IPA content, and emulsification value. The control of dampening water should be carry at the state of the standard when adding proper ratio of etching solution. It would be more effective when pH or conductivity control carries out in parallel with controlling dampening water. Therefore the concept that pH5.5 is correct is based concept. Based on these initial tests it is defined that the standardization of dampening water control is required.

• 한국물환경학회지
• /
• 제39권6호
• /
• pp.439-450
• /
• 2023

The Yeongsan River, a major water resource for Jeollanam-do, that is adjacent to industrial complexes and agricultural areas, is exposed to water pollution. Therefore, it is necessary to investigate the impact of water pollution incidences and prepare response systems for river environment safety for other water resources in the future. Environmental Fluid Dynamics Code (EFDC) was applied to the mainstream of the Yeongsan River where residential, commercial, and agricultural areas are located to analyze the behavior of pollutants conducting the scenario analysis. Considering the pollutants that affected the study area, two pollutants, oil and benzene, with different physical and chemical characteristics were selected for the analysis. As a result of comparing the actual and simulated values of the water elevation, temperature, and flow rate, it was confirmed that the model adequately reproduced the hydraulic characteristics of the Yeongsan River. The oil flow dynamics showed that an increase in flow rate led to reduction in the maximum height of the slick. Notably, the behavior of the oil was predominantly influenced by the wind conditions. In the case of benzene, lower flow scenarios exhibited decreased arrival times and residence times accompanied by an elevation in the maximum concentration levels. From the results of pollutant behavior in the study area, it is feasible to utilize the section of tributary confluence for collection and the weir area for dilution. This study enhances the understanding of the pollutant's behavior with different characteristics and develops effective control systems tailored to the physicochemical attributes of pollutants.

• 한국물환경학회지
• /
• 제28권2호
• /
• pp.224-231
• /
• 2012

It is necessary to develop flow duration curve (FDC) on each unit watershed in order to analyze flow conditions in the stream for the management of Total Maximum Daily Loads (TMDLs). This study investigated a simple method to develop FDC for the general use of the curve. A simple equation for daily flow estimation was derived from the regression analysis between the 8-day interval flow data of a unit watershed and the daily flow monitoring data of an adjacent upstream region. FDC can be prepared with the calculation of daily flow by the equation for each unit watershed. An annual and a full-period FDC were drawn for each unit watershed in Guem river basin. Standard flow such as low and ordinary flow can be obtained from the annual FDC. Major percentile of flow such as 10, 25, 50, 75 or 90% can be obtained from the full-period FDC. It is considered that this simple method of developing FDC can be utilized more widely for the calculation of standard flow and the assessment of water quality in the process of TMDLs.

• KIEAE Journal
• /
• 제13권1호
• /
• pp.93-100
• /
• 2013

A outdoor space of the brand apartment can improve the quality of the whole environment in apartment and has differentiated identity in apartment housing through various versions of the green space and water space plan. The purpose of this study is to evaluate nature-friendly design characteristics in brand apartments and to offer a basic information for planning of brand apartment. In concrete, nature-friendly design did by green space and water space that can analyze by visual, and investigation contents divided to position, form, user behavior, link space from user viewpoint by case study. This study examined a case of eight brand apartments located in Gangnamgu, Seoul. We has divided the characteristics of a green space into horizontal type, vertical type, multi-dimensional type and has divided the water space into stagnant water type, flowing stream type, waterfall type and fountain type. The findings are summarized as follows: First, in case of the space of brand apartment, the application of horizontal and vertical greenery was lower compare with multi-dimensional green space. The most of items for multi-dimensional greenery have been planned to the open space and promenade. Second, a stagnant water type of water space features well used in most of the cases but a water space of signs of activity like a flowing stream, waterfall, fountain types were underused because of problem of administrative and maintenance expenses. Thirdly, Water space of brand apartments was planned with specialization item by apartment housing but green space does not have differentiated item and was planned by most similar form.