• 한국소음진동공학회논문집
• /
• 제27권1호
• /
• pp.114-120
• /
• 2017

Water supply and drainage noise in the bathroom is recognized as one of the main noises, along with the floor-impact sounds, in apartment housings. Recently, to solve such noise issues, a new construction method of installing the piping on the slab has been adopted. rather than the traditional method of penetrating the piping through the slab between the upper and the lower bathrooms. However, this new method has limitations due to high costs and constructional difficulties. Therefore, this study was conducted to develop noise reducing piping and elbows, where the noise can be reduced simply by replacing the existing pipings. The noise level was measured in a laboratory by installing the horizontal drainage piping (three types) and the elbows (three types) developed in this study. The results showed that the horizontal pipings reduced the noise level in LAmax by 0.3 dB(A)~1.0 dB(A), as compared to the existing pipings (VG2), indicating an insignificant noise reduction effect. The elbow reduced the noise level in LAmax by 5.5 dB(A) ~ 11.5 dB(A), as compared to the existing elbow (DRF elbow), with the result of reducing the noise level at all frequencies evenly. Consequently, it was shown that using the elbows is more effective in reducing the water-drainage noise from the toilet than using the horizontal pipings.

• 한국환경과학회지
• /
• 제21권5호
• /
• pp.597-603
• /
• 2012

Non-thermal plasma processing using a dielectric barrier discharge (DBD) has been investigated as an alternative method for the degradation of non-biodegradable organic compounds in wastewater. The active species such as OH radical, produced by the electrical discharge may play an important role in degrading organic compound in water. The degradation of N, N-Dimethyl-4-nitrosoaniline (RNO) was investigated as an indicator of the generation of OH radical. The DBD plasma reactor of this study consisted of a plasma reactor, recycling pump, power supply and reservoir. The effect of diameter of external reactor (15 ~ 40 mm), width of ground electrode (2.5 ~ 30 cm), shape (pipe, spring) and material (copper, stainless steel and titanium) of ground electrode, water circulation rate (3.1 ~ 54.8 cm/s), air flow rate (0.5 ~ 3.0 L/min) and ratio of packing material (0 ~ 100 %) were evaluated. The experimental results showed that shape and materials of ground were not influenced the RNO degradation. Optimum diameter of external reactor, water circulation rate and air flow rate for RNO degradation were 30 mm, 25.4 cm/s and 4 L/min, respectively. Ground electrode length to get the maximum RNO degradation was 30 cm, which was same as reactor length. Filling up of glass beads decreased the RNO degradation. Among the experimented parameters, air flow rate was most important parameters which are influenced the decomposition of RNO.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 춘계학술대회 논문집 반도체재료
• /
• pp.34-37
• /
• 2001

As the integrated circuit device shrinks to smaller dimensions, chemical mechanical polishing (CMP) process was required for the global planarization of inter-metal dielectric (IMD) layer with free-defect. However, as the inter-metal dielectrics (IMD) layer gets thinner, micro-scratches are becoming as major defects. Micro-scratches are generated by agglomerated slurry, solidified and attached slurry in pipe line of slurry supply system. To prevent agglomerated slurry particle from inflow, we installed 0.5${\mu}m$ POU (point of use) filter, which is depth-type filter and has 80% filtering efficiency for the $1.0{\mu}m$ size particle. In this paper, we studied the relationship between defect generation and pad count to understand the exact efficiency of the slurry filtration, and to find out the appropriate pad usage. Our preliminary results showed that it is impossible to prevent defect-causing particles perfectly through the depth-type filter. Thus, we suggest that it is necessary to optimize the flow rate of slurry to overcome depth type filters weak-point, and to install the high spray of de-ionized Water (DIW) with high pressure.

• 한국지반환경공학회 논문집
• /
• 제19권7호
• /
• pp.13-18
• /
• 2018

최근 도심지를 중심으로 도로함몰이 증가하고 있어 시민들의 안전을 위협하고 있다. 도로 하부에는 상하수도관로, 전기통신시설 등 각종 도로시설물이 매설되어 있는데 이 시설물의 노후화가 도로 함몰의 원인으로 작용하고 있다. 특히, 도로함몰의 주된 원인으로 주목받고 있는 노후 하수관의 경우 단순히 매설연도에 의존하여 하수관 교체 및 보수보강 등의 관리가 이뤄지고 있으며, 하수관 상태에 의한 도로함몰의 위험성은 고려되지 않는 실정이다. 따라서, 본 연구에서는 다양한 하수관 제원 및 주변 환경 정보 및 CCTV 탐사 결과 및 GPR 탐사 결과를 고려한 신뢰성 있는 도로함몰 위험도 평가 방안을 제시하고자 하였다.

• 한국지진공학회논문집
• /
• 제5권3호
• /
• pp.9-17
• /
• 2001

본 논문은 지진으로 인한 라이프라인과 공공설비에 대한 위험 지역 묘사 및 물리적 손실추정에 중점을 두었으며, 또한, 지리정보시스템(GIS)과 지진영향의 공간적 특성 평가에 사용된 송수관망을 통한 GIS 적용이 강조되었다. 1994년도의 Northridge 지진에서 얻어진 물 공급 능력이 기록된 GIS 자료를 통하여 매장된 라이프라인 피해와 다양한 지진 매개변수들의 상호 관계가 검증되었으며, 통계학적으로 가장 뚜렷한 상호 관계를 갖는 지진 매개변수들이 발견되었다. Northridge지진으로부터 얻어진 GIS 자료를 이용하여 송수관의 손상률, 종류, 직경, 그리고 다양한 지진 매개변수들이 평가되었다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2005년도 연구개발 발표회 논문집
• /
• pp.613-616
• /
• 2005

In general, the hollow jet valve, the fixed cone valve had been used for the urgency released or maintenance of the flow rate. Nowadays, the butterfly valve, the gate valve are applied in economic performance and operation maintenance more than the hollow jet valve, the fixed cone valve. However, in the case of butterfly valve, it should be required the strict application standard to the cavitation coefficient because the structural axis and disk were situated in pipe channel and the occurring the shock problem by Karman Vortex. And, the judgment data for choice were slight lowdown in water supply and drainage facilities standard or Japanese penstock technology standard, various standard of KOWACO etc. Therefore. there were investigated the valve inside phenomenon (cavitation, disk chattering, vibration) by velocity of flow and the stability examination of body by high velocity of flow through flow scale model test using the numerical analysis and PIV to establish the applicable extensibility of the butterfly valve for the urgency released valve.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.1275-1282
• /
• 2009

The tunnel excavations are used for construction of common utility tunnel, electric tunnel, communication line tunnel, water supply and public sewerage pile line in urban area. The trench cut methods were mainly used in the past, but now, tunneling method is more being used. The tunnel excavation method like as NATM, Messer-Shield, Semi-Shield Methods are being applied to small section tunnel in Korea. The actual construction results of seme-shield method are increasing due to simplified construction process and reduced noise and vibration. And also this method is being used frequently in waterway tunnel and construction of prevention flooding recently. The seme-shield method design guideline is absence except for electric line tunnel construction in Korea, because of the semi-shield method was developed in Europe and Japan. In the prescriptive design, engineer's subjects are tending to intervene, because of absence of standard and specification for details. Therefore, Design and Construction Problems of Semi-Shield Method were described and construction trouble was introduced for exam. These problem and construction troubles have to be examined thoroughly in advance.

• 한국농공학회논문집
• /
• 제50권5호
• /
• pp.3-15
• /
• 2008

This study aims to simulate the 3 dimensional (3D) model of Keum-man connection canal using geographic information system (GIS) as well as considering design in viewpoint of engineering. The canal connects from Keumkang to Mangyungkang in order to supply fresh water into Saemankeum lake. This study used 3 dimensional spatial planning model (3DSPLAM) process to generate the 3D model, which has not only several planning layers in actual process, but also their corresponding layers in modeling process to simulate 3D space of rural villages. The discharge of the canal is $20m^3/s$ on slope of 1/28,400 in the canal length of 14.2km, which consists of pipe line and open channel. This study surveyed the route of the canal and its surrounding environment for facilities to make images in the 3D graphic model. Besides, the present study developed data set in GIS for geogrphical surface modeling as well as parameters in hydraulic analysis for water surface profile on the canal using HEC-RAS model. From the data set constructed, this study performed analysis of water surface profile with HEC-RAS, generation of digital elevation model (DEM) and 3D objects, design of the canal section and route on DEM in AutoCAD, and 3D canal model and its surrounding 3D space in 3DMAX with virtual reality. The study result showed that the process making 3D canal model tried in this study is very useful to generate computer graphic model with the designed canal on the surface of DEM. The generated 3D canal can be used to assist decision support for the canal policy.

• 한국수산과학회지
• /
• 제3권1호
• /
• pp.19-26
• /
• 1970

1969년 여름 부산수산대학 양어장에서 1963년 일본으로부터 도입하여 길러온 초어와 백련을 사용 채란과 부화실험을 하였는 바, 그 결과는 좋지 못하였지만, 다음과 같은 점을 지적한다. 1. 부산지방의 못에서 양식한 초어가 백련의 성숙 채란 적기는 6월 말부터 8원 초까지의 사이에 있다고 인정된다. 2. 산란 촉진용 뇌하수체는 동종 또는 근연종의 친어로부터 그들의 산란기이 진에 적출 보관하였다가 사용하는 것이 좋다고 인정된다. 3. 백련은 체장 40cm(전장 48cm) 가량의 작은 개체도 6년생은 모두 채란 가능하였으며, 포란수는 체장 $40\~44.5cm$ 되는 것에서 $23\~26$ 만개로 추산되었다. 4. 부화 시설로서는 원추형 망부화기를 급수 파이프에 병렬하고, 각 부화기에는 수량 조절용 발브를 달아서 수중에 설치하는 것이 좋은 동작을 하였다. 5. 알의 발생 중, 분할된 할구(세포)가 배체 밖으로 방출되는 것이 생기면, 그 알은 예외없이 괴사하였다. 6. 친어의 사전 관리를 보다 철저히 하는 것이 긴요함을 느꼈으며, 좋은 먹이와 적절한 수심 및 수온을 유지시키도록 해야 할 것이다.

• 에너지공학
• /
• 제10권4호
• /
• pp.318-326
• /
• 2001

중저온 배열회수를 통해 열설비의 열효율을 향상시키기 위하여 1 MW급 유기랭킨사이클시스템을 설계, 개발하였다. 포항제철소에 있는 두 대의 100 MW급 기력발전소에서 발생하는 175$^{\circ}C$의 배가스를 산업체에서 발생하는 대표적인 중저온배열원으로 선정하고, 환경오염을 최소화할 수 있는 신냉매인 HCFC-123을 시스템의 작동유체로 선정하였다. 유기냉킨사이클시스템의 시험운전을 통하여 유기랭킨사이클시스템이 산업체의 중저온배열을 회수하는데 유용함을 확인하였다. 열수의 가열, 터빈기동 및 전기투입방법 등의 운전방법을 최적화하였다. 그러나 HCFC-123 공급펌프의 능력부족으로 작동유체의 공급이 부족하여 정격출력보다 낮은 670kW의 전력을 생산할 수 있었다. HCFC-123의 공급유량을 증가시키기 위하여 파이프의 압력손실저하 및 펌프의 성능 향상을 위한 펌프교체 등이 고려되어야 함을 알 수 있었다.