• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.452-452
• /
• 2010

차세대 디스플레이로서 주목 받고 있는 유연성 정보표시 소자 개발에 대한 요구도가 날로 증대되고 있다. 유연성 정보표시 소자로서 플라스틱 기반 유연성 소자가 특히 주목 받고 있으나, 이의 실용화를 위해서는 플라스틱 기판에 적용 가능한 보호막 형성 기술 개발이 선행되어야 한다. 플라스틱 필름의 경우 높은 산소 및 수분 투과율 때문에 유연성 디스플레이의 응용에 걸림돌이 되고 있다. 플라스틱 기반 유연성 소자의 장수명화를 위해서는 수분과 산소의 투과를 방지하는 passivation layer 형성 기술이 필수적으로 요구된다. 본 연구에서는, polyethylene terephethalate (PET) 기판상에 증착된 $SiO_x$ 보호막의 합성에 있어서 중간층 유무에 따른 투습특성의 변화를 살펴보았다. 기화된 HMDSO (Hexamethyldisiloxane)와 Ar 및 $O_2$ 혼합기체를 이용하여 PECVD 방법으로 $SiO_x$ 박막을 합성하였다. 15 nm 두께의 $Al_2O_3$를 중간층으로 사용하여 중간층 유무에 따른 초기성장 거동 변화가 $SiO_x$ 박막의 투습 특성에 미치는 영향을 조사하였다. $SiO_x$ 박막 구조와 화학적 조성은 각각 FE-SEM과 FT-IR을 이용하여 분석하였으며, AFM을 이용하여 $SiO_x$ 박막 표면 미세 형상을 관찰하였다. 투습률은 MOCON사(社)의 Permatran-W 3/33 MA을 이용하여 측정하였다. 그리고 반복 굽힘 시험기를 이용하여 $SiO_x$ 보호막의 동적 투습 특성을 조사하였다. $Al_2O_3$ 중간층 유무에 따라 $SiO_x$ 박막의 투습률 (WVTR; water vapor transmission rate)은 ${\sim}10^{-1}g/m^2/day$(300 nm-thick $SiO_x$/PET)에서 ${\sim}5{\times}10^{-3}g/m^2/day$(300 nm-thick $SiO_x$/15 nm-thick $Al_2O_3$/PET)으로 변화하였다. 300 nm-thick $SiO_x$/15 nm-thick $Al_2O_3$/PET 시편의 경우 곡지름 50 mm에서 1,000회 반복 굽힘 후에도 투습률 변화를 보이지 않았다. 이와 같은 $SiO_x$ 박막의 투습 특성 변화는 $Al_2O_3$ 중간층 유무에 따른 초기 성장 거동의 변화로 해석된다. FE-SEM 및 AFM 표면 미세 구조 관찰을 통한 초기 성장 거동 변화 조사 결과, $Al_2O_3$ 중간층 없이 PET 기판위에 $SiO_x$ 박막 증착한 경우 3 차원 성장을 하는 반면, PET기판위에 $Al_2O_3$ 중간층 형성 후 $SiO_x$ 박막 증착하는 경우 2 차원 성장을 하게 됨을 관찰하였다. 따라서 본 연구를 통하여, 플라스틱 기반 유연성 표시 소자에 적용하기 위한 $SiO_x$ 보호막 합성 에 있어서 초기 성장 거동의 변화가 투습 특성에 민감한 영향을 미침을 알 수 있었다.

• Korean Journal of Materials Research
• /
• v.8 no.4
• /
• pp.317-322
• /
• 1998

The stabilization of low dielectric constant SiOF films prepared by conventional PECVD using TEOS and $C_2F_6$ was evaluated by the $N_2O$-plasma post-deposition annealing. Properties of SiOF film became unstable when it was air-exposed or heat-treated. Water absorption of SiOF films was increased as F content was increased due to the for¬mation of F -Si- F bonds. Also F content of SiOF films decreased after heat treatment. $N_2O$-plasma post-deposition annealing was proved to be effective on stabilizing SiOF films. which was mainly due to the formation of thin SiON layer near the top surface of films. However. the value of dielectric constant was greatly increased again when $N_2O$-plasma post-deposition annealing was done for a long time. To stabilize the SiOF films without an increase of dielec¬tric constant by $N_2O$- plasma post-deposition annealing. the annealing time should be kept the minimum value. to which stabilizing effects against air environment and heat treatment were preserved.

• Fire Science and Engineering
• /
• v.20 no.4 s.64
• /
• pp.1-12
• /
• 2006

In this study, CFD computer simulations by FDS are carried out in order to confirm the performance of the combined operation of both sprinkler system and smoke curtain of 0.54 m depth installed for cooling and blocking the smoke which propagates beneath the sloped ceiling of a stairway corridor of which dimensions are 17.92 m long, 4.00 m wide, and 6.12 m high. It is shown that the response time of sprinklers decreases with fire size and it increases more about 1.1 second in case without smoke curtain than in case with smoke curtain, that the time of smoke transport from the fire source to the stairway outlet decreases considerably with fire size, and that the delay effect of smoke transport is not related to the sprinkler system, whether it is operated or not. This study shows that the combined operation of both sprinkler system and smoke curtain is very effective in smoke cooling, but it is a little for effect on smoke blockage. Although the hazard of skin burn due to radiative heat flux from hot smoke layer is decreased by spray cooling effect, the hazard of smoke suffocation and the weakening of visibility is increased by smoke downdrag and the turbulence of smoke-air mixing due to water spray. These conditions may result in preventing occupants from going out of the stairway during evacuation.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.1
• /
• pp.114-120
• /
• 1998

The spawning behavior, development of eggs and larvae of the Korea freshwater goby, Rhinogobius brunneus (Temminck et Schlegel) were studied. The eggs were spawned as a one-layer mass, hanging from the underside of a small pebble, and guarded by one male. The eggs were elliptic, about 1.48 mm in length and 0.65 mm in breadth, with a round top and a somewhat flat base with glutinous fibers. Hatching in the indoor tank with $17.0^{\circ}C$ in mean water temperature started from the 146 hours after fertilization. In the late developing stages, the embryo moved and freely changed its head to face the free tip of the chorion (normal egg) or to the basal end with a boundle of adhesive filaments (agrippa egg). Newly-hatched larvae were $3.10\~3.30$ mm in total length (mean: 3.22 mm), and mouth and anus were not yet open. Melanophores were present on the air- bladder, around the anus, and on the ventral part of the caudal region. The larva $3\~4$ days old transformed to postlarval stage, and they were $3.30\~3.85$ mm in total length (mean: 3.60 mm). As yolk sac and oil globules werw nearly absorbed, mouth and anus were open, and they fed rotifers actively. In $20\~22$ days after hatching the larvae grew to 5.85 mm in 71, and the caudal notochord flex at $45^{\circ}$.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.20 no.5
• /
• pp.455-460
• /
• 1991

In order to identify hard distinct 12 fish species(shiba shrimp Metapenaeus joyneri, fleshy shrimp Penaeus orientalis, ridgetail prawn Palaemon carinicauda, yellow croaker Pseudosciaena manchurica, croaker Niber albiflora, Colichthyes fragilis, brown sole Limanda herzensteini, frog flounder Pleuronichthys cornutrs, Areliscus rhomaleus, stone flounder Kareius bicoloratus, harvest fish Pampus argenteus, flag fish Goniistius zonatus) by seeing with naked eye in Kunsan coastal area, sarcoplasmic protein in the supernatant was used for isoelectric focusing. For getting supernatant, fish muscle tissue was blended with two times deionized water and centrifuged (at $4^{\circ}C$, 12,000rpm for 15min). Isoelectric focusing of sarcoploasmic protein carried out on a LKB Multiphor II using polyacrylamide gel plate (2mm thickness, pH $3.5~10^{\circ}C$, pH 5~8 gradient, at $10^{\circ}C$ for 1.5, 3 hours). In case of uncertain protein pattern, pH gradient was modified to narrow pH gradiet, and excuted 2-D electrophoresis using conventional polyacrylamide gel electrophoresis. Most of fishes except yellow croaker and Collichthyes fragilis were distingushed by isoelectric focusing. The protein maps of 2-D electrophoresis for analyzing two protein bands at aimilar positions(pH 5, 6) between the two fish species showed the diffeences of the estimated molecular weights, 11,700(pH5.0) and 87,000(pH6.0)

• Food Science and Preservation
• /
• v.11 no.1
• /
• pp.63-70
• /
• 2004

The antimicrobial substances from Rhodiola sachalinensis were extncted, isolated and identified. The highest level of antimicrobial activity and its yield were obtained in methanol extract. The minimum inhibition concentrations of the methanol extract were 500 $\mu\textrm{g}$mL on agar plate and 100 $\mu\textrm{g}$mL in broth media for four gram positive and four gram negative microbials. The methanol extract was fractionated by n-hexane, chloroform, ethyl ether, ethyl acetate, and butanol, orderly. The separate was developed on the TLC plate with different solvent system ratio of chloroform and methanol. Nine substances were isolated from chloroform and methanol mixture(9:1, v/v). Among them, three isolates showed antimicrobial activity. Three substances separated by HPLC were identified by GC/MS(EI) spectrum and $^1$H, /sup13/C-NMR spectrum. They were gallic acid, (-)-epicatechin and kaempferol. The antimicrobial activities of each substances were shown gallic acid, (-)-epicatechin, kaempferol orderly.

• Korean Journal of Soil Science and Fertilizer
• /
• v.22 no.1
• /
• pp.1-5
• /
• 1989

This study was carried out by using laboratory data to calculate Soil Moisture Control Section (SMCS) for medium textured topo-sequential soils derived from porphyry in Milyang area. The soils studied were characterized by loam to silty clay loam, and the moisture content at -1/3 bar in the solum ranged around 21.06% to 32.42%. The moisture contents per centimeter of soil layer within a solum calculated at field capacity (FC) ranged from 0.11cm to 0.19cm. The upper boundaries of SMCS of the soils calculated on the basis of FC as the water content at -1/3 bar, ranged from 16.2cm to 21.2cm and the lower boundaries from 44.4cm to 63.8cm, and the depth of SMCS were from 27.7cm to 42.6cm in the soil profiles. The Bongsan soil on the summit had shallower in the boundaries and narrower in the depth of SMCS than the soils on side-slopes or on valley.

• Korean Journal of Plant Resources
• /
• v.34 no.2
• /
• pp.144-155
• /
• 2021

This study was conducted to analyze community structure and species composition of Abies koreana forest. Field survey was carried out from June, 2019 to 2020, September. 121 plots (20×20 m) were set up, 5 herb layer plots (3×3 m) were constructed for each plot, and there, Diameter at Breast Height(DBH), height, environmental factor were measured. It was analyzed that water stress did not have a significant effect on the factors affecting the growth of A. koreana in Mt. Halla-san, and in the case of Mt. Deokyu-san, the more forest stands located at the ridge, the higher the tree density. It was found that the factors affecting the distribution of Abies koreana were not consistent according to the environment of study site.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.4
• /
• pp.28-36
• /
• 2021

It is known that buried rebars inside concrete structures are protected from corrosion due to passive layer. It is very important to delay the timing of corrosion or evaluate a detection of corrosion initiation for the purpose of cost-beneficiary service life of a structure. In this study, corrosion monitoring was performed on concrete specimens considering 3 levels of cover depth(60 mm, 45 mm, and 30 mm), W/C(water to cement) ratio(40.0%, 50.0%, and 60.0%) and chloride concentration(0.0%, 3.5%, and 7.0%). OCP(Open Circuit Potential) was measured using agar-based socket type sensors. The OCP measurement showed the consistent behavior where the potential was reduced in wet conditions and it was partially recovered in dry conditions. In the case of 30 mm of cover depth for most W/C ratio cases, the lowest OCP value was measured and rapid OCP recovery was evaluated in increasing cover depth from 30 mm to 45 mm, since cover depth was an effective protection against chloride ion ingress. As the chloride concentration increased, the effect on the cover depth tended to be more dominant than the that of W/C ratio. After additional monitoring and physical evaluation of chloride concentration after specimen dismantling, the proposed system can be improved with increasing reliability of the corrosion monitoring.

• Food Engineering Progress
• /
• v.14 no.2
• /
• pp.159-165
• /
• 2010

Red ginseng tail roots (9.8 g water/100 g sample) were puffed at 7, 8, 9, and 10 $kg_{f}/cm^{2}$ using a rotational puffing gun. Puffed red ginseng was extracted with 70% ethanol, and the concentrated extract was successively partitioned with diethyl ether, n-butanol and $H_{2}O$. Two unknown ginsenosides from puffed red ginseng were found at 63 and 65 min of retention time in HPLC chromatogram suggesting that chemical structure of some ginsenosides might be altered during the puffing process. Identification of two unknown compounds was carried out using TLC, HPLC and NMR. Two major compounds were isolated from TLC. According to TLC result, compound I was expected to be the mixture of ginsenosides Rk1 and Rg5, and compound II was expected to be a 20(S)-ginsenoside $Rg_{3}$. Three compounds were isolated from n-butanol fraction through repeated silica gel and octadecyl silica gel column chromatographies. From the result of $^{1}H$- and $^{13}C$-NMR data, the chemical structures of unknown compounds were determined as ginsenoside $Rg_{5}$ and 20(S)-ginsenoside $Rg_{3}$. Unfortunately, ginsenoside $Rk_{1}$ could not be separated from ginsenoside-$Rg_{5}$ in the compound I. It was carefully reexamined using HPLC and confirmed that the last unknown compound was ginsenoside-$Rk_{1}$.