• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2002.05a
• /
• pp.34-45
• /
• 2002

The new measuring method of micro-stickies considering both the effects of charge neutralization and evaporation of process water was developed by KRICT PPRC. By the new KRICT method, the contamination of metal dryer surface and other machine clothes could be estimated quickly and simultaneously. According to this study, it could be confirmed that the novel method is a useful one for the evaluation of several treatments regarding the reduction of stickies troubles.

• Journal of the Korean Society of Industry Convergence
• /
• v.8 no.2
• /
• pp.113-120
• /
• 2005

Due to the Typhoon MAEMI on Sep. of 12 in 2003, the turbidity value of DOAM Dam was recorded more than 300NTU until now. The natural zeolite located in the east coast of Korean peninsula was applied to reduce turbidity with cation exchange process. The result of this technique, the value of turbidity was reduced less than 1NTU. Also the value of pH showed stable state compare to before and after.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.2
• /
• pp.91-98
• /
• 2016

Cellulose nanofibrils (CNF) was made from oil palm trunk (OPT) with soda-anthraquinone pulping, chlorine dioxide bleaching, carboxymethylation, followed by mechanical grinding. Size of this CNF was 16-40 nm of width confirmed by TEM. To evaluate CNF from OPT as cosmetics raw materials for moisturizing component, water holding properties was compared with hyaluronic acid and collagen. CNF from OPT had better water holding property than collagen or hyaluronic acid whether phenoxyethanol was added as antiseptic or without additive.

• Journal of the Korean Society of Industry Convergence
• /
• v.8 no.3
• /
• pp.161-168
• /
• 2005

This study is analysis for adjacent structures and ground movement by deep excavation work. Underground Inclinometer has shown that deformation of increment is minor within to allowable limit. According to the measurements result of slope and crack for adjacent structures, a detached house showed bigger than hospital structure to deformation of increment. Variation of underground water level didn't effect so much to ground and adjacent structures movement because underground water flows in rock and didn't give the water press to propped walls. Measurement data of strut variation is within tolerance limit. Because excavation site's wall was strengthened suitably. This study will contribute in establishment of measurement standard and information-oriented construction during deep excavation in multi-layered ground including rock masses.

• Food Science and Biotechnology
• /
• v.18 no.2
• /
• pp.456-462
• /
• 2009

In comparison to processed wheat flour products, there is no established method for determining the water absorption of rye flour. The aim of this study was to work out a method using the Planetary mixer P 600 for the determination of water absorption (WA) and the rheological properties in rye dough made from rye flours of 4 different types (I-IV). In the correlation analysis showed that WA had positive correlation with ash, beginning of gelatinization, $125-160{\mu}m$ particles, sedimentation values at 20 and 25 min, bread yield, pH, and total titratable acidity, but had negative correlation with initial viscosity, gelatinization maximum, viscosities on swelling at 25, 28, and $31^{\circ}C$. The WA determined by the Planetary mixer P 600 agreed well with the experimental baking tests.

• Journal of Korea Society of Industrial Information Systems
• /
• v.20 no.4
• /
• pp.25-37
• /
• 2015

The early studies indicated that the firm with monopoly power is likely to engage in X-inefficiency such as a managerial slack. The reflection of the X-inefficiency theory has led to the issue that the public sector may be more inefficient than the private sector. In Korea like other many countries the electricity gas water service which can be considered as natural monopoly have been provided mostly by the public sector. In order to provide the empirical evidence to the argument that the public sector may be more inefficient than the private sector this paper estimated the four types of Solow residual which is called the total factor productivity in the electricity gas water service industry with the associated empirical model and compared its productivity with one in the manufacturing industry. The empirical results do not support the argument that the public sector may be more inefficient or less productive than the private sector.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.459-463
• /
• 2006

For the purpose of developing liner board for water-resistant corrugated board in the cold chain system, several types of base paper for corrugated board were purchased from the market and 6 different boards were produced in the paperboard mill by applying the chemicals on the base paper. Then, water-moisture resistant performance and physical properties of the boards were evaluated and compared each other. The liner board which is dried at high temperature with pressure by the Condebelt showed a superior performance in strength over conventional liner boards. Strength of the board increased by surface chemical treatment up to 60% of compressive strength and 30% of bursting strength. Starch insolubilization with Ammonium-Zirconium -Carbonate and surface coating with a surface size and a moisture resistant chemical on CK paper showed the best result. Therefore, this method was recommended to produce the outer liner board for water -resistant corrugated board.

• Journal of Korean Society of Water and Wastewater
• /
• v.31 no.5
• /
• pp.447-457
• /
• 2017

This study derived the unit of industrial water usage reflecting the latest industry trends. Available for establishing plans such as the master plan for water supply system and analyzed changes in the basic unit by a comparison with the current basic unit values. This study analyzed 4,038 samples with a sampling error of less than 1.5 % at the 95 % confidence level after removing outliers according to a log-normal distribution. As a result, the unit of industrial water usage per site area in the whole manufacturing industry was 7.11 m3/1,000m2/d. The ten industrial categories (C10, C13, C20, C21, C22, C25, C27, C30, C32, C33) showed a similar unit value compared to before, and the four industrials categories (C11, C17, C22, C31) showed a more unit value than before. With regard to the nine industrial categories (C14, C15, C16, C18, C19, C24, C26, C28, C29), the unit value decreased. Cases that companies examined before were the same as the companies examined in this study were analyzed. The result that the changes in the unit industrial water usage were reasonable was obtained. However, in some industrial categories (C17, C14, C24, C29), the unit value was changed by a small number of companies with large-scale water use or unit value of sampling had a large deviation. It was considered necessary to survey them periodically. The unit of industrial water usage derived by the survey in this study reflects the current industrial trends in 2016. Water use in manufacturing companies has continuously changed by the development of manufacturing technologies and simplification of manufacturing processes. In order to deal with this, it is considered necessary to survey the usage of industrial water periodically from a long-term perspective.

• Journal of the Korean Society of Industry Convergence
• /
• v.27 no.5
• /
• pp.1189-1197
• /
• 2024

Due to the rapid development of the industry, the use of iron is increasing rapidly in various industrial fields. Among these iron use areas, problems caused by corrosion of iron are seriously occurring in water-related industries. In particular, as the importance of environmental management has emerged, the water industry market desperately needs to replace aging water infra structure due to corrosion. In order to overcome this problem, research on a method capable of corrosion prevention system is being actively conducted. As the method for corrosion prevention system has various voltages and currents applied depending on the surrounding environment, the demand for an appropriate voltage regulator is increasing rapidly. In particular, as the IOT industry develops, the capacity of corrosion prevention system is increasing by expanding the area in which the method machine operates. Therefore, rectifiers for preventing corrosion are being changed from conventional flyback systems suitable for small capacities to inverter-type rectifiers suitable for large capacities. The inverter-type rectifier has various problems by reducing it to the initial rush current when starting. Therefore, this paper proposes a new starting method that can reduce initial inrush current in inverter-type rectifiers. T he proposed method can secure DC phase voltage for stable operation of the inverter by implementing discontinuous boosting operation using the switch of the inverter. In addition, the excellence of the proposed method was verified through simulations and experiments.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.5
• /
• pp.79-87
• /
• 2014

The enrichment with nutrients in rivers and lakes becomes serious problems in Korea. As the environmental friendly solution, the phytoremediation are getting more attention and the water hyacinth could be a strong candidate plant for this. Water hyacinth is a free floating freshwater plant proven to be a effective plant used for a purification of a polluted lakes, sewage wastewater, and livestock wastewater. The biggest obstacles for application of water hyacinth in Korea could be the disposal of the water hyacinth before winter, because there is no feasible use for the water hyacinth until now. In this study, the characteristics of water hyacinth were deeply investigated for providing background data to develop appropriate application of the water hyacinth. The water hyacinth was fractioned three parts, leaf, air blader, root of which morphological properties were evaluated with microscope and field emission scanning electron microscope (FE-SEM). The water contents of each parts of the water hyacinth were 87% for leaf, 96.5% for air bladder, 94.6% for root. The chemical compositions of each parts were also measured and showed around 29% of hot water extract in leaf and air bladder, 42% holocellulose for leaf, 47% holocellulose for air bladder. The application of water hyacinth biomass without root parts to papermaking provided bulkier structure, but the tensile strength was decreased.