• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.05a
• /
• pp.309-313
• /
• 2004

Prediction of green water loads acting an the bow deck is an essential part for the design of bow structures against the green water impact. Proper technique of the green water simulation is highly required for the prediction of green water loads. In this paper, a new numerical method for green water simulation, which is based an predictor-corrector-upwind finite difference scheme of the 2nd kind, is introduced. Through the comparisons between computed' results and experimental measurements, it is verified that the present numerical tool is adequate as a practical calculation tool for the green water problem.

• Journal of Convergence for Information Technology
• /
• v.12 no.3
• /
• pp.85-107
• /
• 2022

This study is to analyze the induced effect, network connectivity, and network visualization of the water transportation industry on the overall economy in relation to all industries. For this, various inducement coefficients of the water transportation industry are analyzed using industry linkage analysis and unit structure matrix, and network visualization analysis is performed using network connectivity and NetDraw using Ucinet 6 that utilizes unit structure matrix and inverse matrix function. As a result of the study, analysis results of input coefficient, production inducement coefficient, value-added inducement coefficient, and inter-industry chain effect were presented as various inducement coefficients in the water transportation industry. content was presented. Through this study, the current position and status of the water transportation industry and its relationship with all industries were confirmed, and the strategic relationship with which industries it should be presented was presented. In the future, it is necessary to further analyze the current status and trends of various induced effects, connectivity (centrality), and network visualization analysis using industry-related analysis published since the 2000s.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.36 no.1
• /
• pp.16-23
• /
• 2004

Recently the increased concerns about the cost reduction and environmental protection make the paper industry increase the closure level of papermaking system, which results in the buildup of organic and inorganic materials in the papermaking process water. Increase of the system closure causes deterioration of additive performance and provokes diverse problems in papermaking process and product quality. To investigate the effects of process water quality on the physical properties of fine papers handsheets were prepared with process water containing various amounts of inorganic and organic contaminants including calcium or sodium ions and oxidized or cationic starches. Inorgainc and organic materials did not show any significant effect on the physical properties of handsheets. Recycled GCC showed the same trends as inorganic and organic materials. The performance of cationic starch was deteriorated, however, in the recycled white water, which resulted in the reduction of tensile index of handsheets.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.285-291
• /
• 2009

Water is a strategic resource for Singapore due to its small land mass and more than half of the mainland serves as catchment for raw water, including construction sites. Construction site typically involves earthworks and in conjunction with the frequent and intense rainstorm in Singapore, produce runoff of high turbidity due to suspended sediments. The resulting high concentration of suspended sediment in construction site runoff very often leads to aesthetically unpleasant reservoirs and potentially increases the treatment cost of raw water. To mitigate this, the local standard requires the discharged concentration of total suspended solids of construction runoff leaving a construction site to be less than 50mg/l which is a very high standard. This paper will present, examine and discuss particular issues and practices of Singapore's construction industry in meeting this requirement. The focus will be on two areas: Government lead initiatives and industry practices. How the government agencies worked together with the industry professionals to develop a system to ensure meeting of the standard is discussed. In addition, the types of industry practices, including various Best Management Practice to reduce erosion in construction sites and implement effective sedimentation on construction sites are examined.

• Textile Coloration and Finishing
• /
• v.18 no.6 s.91
• /
• pp.43-48
• /
• 2006

Electrolytic water(EW), studied in recent decades in the Japan, Russia and United State of America, have shown promise as a method of disinfection whereby low levels of free chlorine, sodium hypochlorite, or hypochlorous acid may be produced in situ in Nacl-containing solution. These methods have shown promise in destruction of microorganisms in medical, dental environment, and in the agriculture and food industry. A recently EW treatment system was evaluated for reducing scouring agent and other surfactants in the washing and scouring process of textile industry Unfortunately, there is, to my knowledge, no serious studies of the properties of EW for textile industry In order to study the characteristics of EW and confirm the possibility of applications in textile industry processes, the pH, surface activity, penetration force, surface tension, and contact angle of EW was measured under various conditions. In general terms, What all this shows is that there is fundamental difference between the properties of EW and that of distilled water.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.4
• /
• pp.102-108
• /
• 2015

Agricultural cultivation papers treated with water repellent were investigated in order to analyse mechanical properties and durability. The water repellency was optimal when papers are treated with Wb and Sa water repellents. Also, WCPs with 5% water repellent were more effective than those of 3 and 10%. In addition, water repellency of WCPs with Wb and Sa water repellents were kept constant in correlation with aging time. Finally, WCP with Wb water repellent possesses efficiency in terms of mechanical properties and durability.

• Nuclear industry
• /
• no.9
• /
• pp.29-45
• /
• 1978

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.1
• /
• pp.1-19
• /
• 2021

The purpose of this research is to improve the investment success rate for startups in the water industry for the development of the entrepreneurial environment of the Korean water industry. In this research, we identified investment determinants through prior research and stratified them, and then surveyed the investor group at the beginning of the start-up using the FGI method, and determined the order of the investment determinants of investors. At the same time, we classified 41 start-ups related to the water industry into two groups: the group that received investment and the group that did not in the early stages of the start-up. Then we investigated the understanding of the investor's investment determinants, ranked them, and compared them by using the AHP technique. Through this, this research proposes five implications. First, it is important for start-ups in the early stages to receive seed investment to revitalize investment for startups in the water industry. For this, startups need to understand investors and prepare to attract investment with the perspective of angel investors rather than the perspective of VC investors. Second, Start-ups in the water sector should consider that the characteristics of the founder are important in order to receive seed investment, and also need to define their business at the industry and market level, and provide relevant rationale to meet the expectations of investors who value industry expertise and experience, and to increase the possibility of seed investment, which is important in the early stages of a startup. Third, institutions, such as K-water(Korea Water Resources Corporation), that support water industry startups need to conduct open innovation business opportunities discovery programs linked to startups so that startups currently participating in the startup support program could have business opportunities from the business infrastructure of platform-forming companies in the water industry. In particular, such institutions should help founders develop their industrial expertise and careers by supporting this type of start-up preparation process through the participation of in-house venture founders. Fourth, when K-water uses the government start-up support fund to discover and foster founders, it should increase initial contact with seed investors, conduct more thorough verification of business plans, and develop programs that use government start-up support funds to prepare a business suitable for seed angel investors. Fifth, K-water should support seed by connecting funds for initial investment among funds operated by itself. It is also necessary to develop a program that links the company receiving the seed investment with VC investment, not angel investment in cooperation with the VC fund operation entity participating as an LP so that companies that have attracted seed investment could attract follow-up VC investment.

• Journal of Environmental Policy
• /
• v.9 no.2
• /
• pp.21-39
• /
• 2010

In this paper, water consumption annually for industries in Korea was estimated for the first time and based on this, an input-output model was prepared for water consumption analysis. Also making use of this, the direct and indirect water consumption effect according to industrial activities was analyzed and the total effect based on volume was broken down into each factor. The amount of water consumed for industries in Korea (excluding agriculture, forestry and fishery) was estimated about 7 billion and 692 million ton in 2003(excluding sea water). Classifying by industry, the one for electric power & water service accounted for almost half, 49.5%, metalworking industry for 24.3% and chemical industry for 5.0%. As the result of estimation for the direct and indirect water consumption inducement coefficients, the amount of water consumed per the production of one million won ranked the highest for electric power & water service as 113.8 ton and the next highest ones ranked as 49.6 ton for the first metalworking, 16.8 ton for textile and leather goods, and 11.9 ton for general machinery respectively. In the meantime, as the result of breaking down into each factor of total amount of water consumed by industry, it appeared that the ripple effect having on other industries was more than the direct effect.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.578-578
• /
• 2016

In the past decade, many countries developed varies promising theories, methodologies and technologies for water resources management, such as Smart Water in Korea, eWater in Australia, Intelligent Water in Untied States, and Internet of Water in China. It is no exaggeration to say that Smart Water Management(SWM) will have a major role to play in addressing the global water challenges in the background of climate change, population growth and rapid urbanization. As a result, we can see major shifts taking place in the structure of the water industry, with a need for new approaches, skills, and water management policies. All these point towards a brighter future for the smart water sector and a new water paradigm, with applications and potential throughout the water cycle. However, each countries have their technology and industry standard system which may swift similar innovation and technology into different channels. In that sense, developing a common performance index and standard docking adapter for assessing Smart Water Management Initiatives(SWMI) is crucial for drawing a linkage of SWMI and SWMs to a way to implement advanced technology across Asia and Pacific. The performance index and standard docking adapter will facilitate quantitative and qualitative effects of utilized SWM techniques.