• Journal of the Korean GEO-environmental Society
• /
• v.6 no.1
• /
• pp.23-31
• /
• 2005

The "Silt Pond" is 180 hectares in size and contained ultra soft slurry-like soil varying between 3 to 20 meters in thickness. Reclamation works in the Silt Pond commenced in the mid of 1990s. A considerable amount of subsurface investigation inclusive of sampling, field vane and density logging tests were carried out prior to the reclamation of the Silt Pond. Since material in the Silt Pond is extremely soft, filling was done by spreading sand with high water content in thin and equal thickness lifts, allowing the stability of the slurry-like foundation. Despite the extreme care taken, failures occurred during the sand spreading phase. A large piece of high strength geotextile measuring $900m{\times}700m$ was placed to strengthen the slurry like soil foundation at locations where the ultra-soft soil was found to be exposed. Following the remedial works, the Silt Pond was again reclaimed by sand spreading up to +4.0m CD. The success of the reclamation was confirmed by marine CPT profiling.

• Journal of the Korean Geotechnical Society
• /
• v.35 no.10
• /
• pp.67-78
• /
• 2019

The efficiency of suppressing fine dust was evaluated by conducting indoor and field experiments for the ground treated with EICP solution, which is an eco-friendly ground improvement method. In laboratory experiments, the EICP solution was prepared with inexpensive materials for the field applicability, and the optimal mixing ratio and optimal spraying volume of EICP solution were calculated. The optimum amount of calcium carbonate was shown when the ratio of urea/calcium chloride and white powder were 1.5 and 15 g/L, respectively. The optimum spraying amount of the EICP solution was $7L/m^2$ determined by fine dust suppression and cone tip resistance experiments. The spraying of water and EICP solution was conducted at the test-bed where dump trucks pass for the effect of suppressing fine dust of each method. The effective fine dust suppression method can be chosen depending on the situation of the site.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.6
• /
• pp.400-408
• /
• 2008

Multipurpose Dam, it produces electric energy by converting the potential energy into kinetic energy utilizing its head and quantity of the water. However, in this process, since during the time when the turbine connected to the hydraulic turbine generator revolves, there occurs a ceaseless loud noise, and due to this condition, it is true state that those people who work at inside of the power plant are damaging as hard as they are unable to concentrate on their work. Not only this, because the hydro-electric power generator room that locates at middle section between the hydraulic turbine room and the office is very large space volume, also since it was constructed chiefly by the reflecting material, it is functioning of amplify the noise when operating the generator, the soundproof measure against this condition is necessitated. On such viewpoint, I have presented the problem point of the relevant Hydraulic turbine dynamo and Hydraulic turbine dynamo room, and after improve such problem point, this study has ever investigated the satisfying degree about the noise-reduction at before and after of the improvement of soundproof measure, using the Auralizational technique that can experience virtual acoustic field. It is considering that such result could be utilized usefully as the fundamental material hereafter for the acoustic performance of the hydro-electric power generator room in dam and when its construction.

• Journal of Convergence for Information Technology
• /
• v.7 no.2
• /
• pp.25-29
• /
• 2017

The purpose of this study was to investigate the effect of a new designed splint on the hand function. A new design splint that enlarges the area between thumb and index finger was manufactured using 3D printing. After wearing a new splint the patient was possible to open thumb and hold a small object. She showed improvement in overall hand function and could move eight blocks in box and block test. But grasping a cup without a handle has become more difficult than before. Also there is a disadvantage that it could not be fixed by water. This study is meaningful in that it is the first splint application study using 3D printing. In the future, we expect that various patient-specific splints will be developed through 3D printing in the field of occupational therapy.

• Journal of the Korean Society for Railway
• /
• v.18 no.6
• /
• pp.558-566
• /
• 2015

In this study, quantitative environmental impact assessments of the VSL anchor and RB(Reaming and Bearing) anchor systems were conducted after a life-cycle assessment (LCA). In addition, improvements which reduce the adverse environmental effects of the RB anchor system were confirmed through comparisons with results with a VSL anchor system. Both results showed that water ecotoxicity and global warming are the most important in environmental influences. To determine the effect of reducing the RB anchor system environment, the result was normalized for the environmental impact category. Most items appeared to have been improved with regard to the RB anchor system. The most significant improvement was a 77% decrease in POC levels(photochemical oxidant creation). Greenhouse gas emissions, related to global warming, were decreased by 44%. It is expected that these quantitative environmental impact assessment results will serve as the basis of an anchor system for civil engineering and environmental impact assessments.

• Korean Journal of Plant Resources
• /
• v.17 no.3
• /
• pp.219-226
• /
• 2004

Transplantings of onion (Allium cepa L.) seedlings are required for higher germinability and uniformity. This study was done to determine effects of various seed treatments (seed cleaning, priming, GA$_3$, prechilling, drying, and light quality during seed drying) on germination and seedling emergence. Nongwoodaego and Changnyungdaego were used as cultivars for checking seed germination, and two cultivars and Cheonjuguhyeonghwang were investigated with seedling production rate. Seed cleaning using water prior to the other treatments greatly increased germination rate. Priming with 200mM Ca(NO$_3$)$_2$ solution somewhat alleviated the germination rate while GA$_3$ did not. Prechilling had the highest rate among the treatments. Seed drying after prechilling enhanced the rate compared to non drying, and during drying the prechilled seeds red light illumination showed the greatest rate in comparison with dark, blue, and far-red ones. Seedling production rate was enhanced in sequential treatments of seed cleaning, prechilling for 3 to 5 days, and red light treatment during 6 hour seed drying.

• Food Science of Animal Resources
• /
• v.41 no.6
• /
• pp.1036-1048
• /
• 2021

This study investigated the possible improvement in the antioxidative status and quality characteristics of ready-to-eat (RTE) Samgyetang after adding various black garlic (BG) extracts. The antioxidant activity, total phenolic content (TPC), total flavonoid content (TFC), meat quality indexes, and lipid oxidation rates were measured after receiving one of five different treatments consisting of conventional Samgyetang broth as a negative control, raw garlic (RG) extract as a positive control, BG, oven-dried BG, and maltodextrin-encapsulated BG extract as treatments. Employing retort cooking, fat trimmed carcasses were added to the initially prepared broth together with a phenolic extract that was set at 5% (w/w). A significant intensification of red and yellow color was observed in breast and thigh meat treated with BG extracts, regardless of pretreatment, compared to the negative control and RG. The moisture percentage was affected by the addition of BG extracts, where the encapsulation group retained the highest water content after retorting. In terms of antioxidative status, maltodextrin-encapsulated BG extract was as effective as an oven-dried extract to scavenge free radicals and showed the highest score among samples (p<0.01). The concentration of TFC was found to be the highest and did not differ between encapsulation and oven-dried groups, followed by BG, RG, and the negative control. However, the addition of encapsulated BG extract was the most effective in delaying the formation of malondialdehyde among the samples. Therefore, pre-treatment of BG extract through encapsulation is recommended to develop a higher antioxidative status and quality characteristics of Samgyetang.

• Transactions of the Korean hydrogen and new energy society
• /
• v.32 no.5
• /
• pp.315-323
• /
• 2021

The air-cooled proton exchange membrane fuel cells (PEMFC) stacks, which is widely used in small-sized PEMFC, have a problem in that durability is weaker than that of the water-cooled type. Because the cathode is open to the atmosphere and the structural problem of the air-cooled stack, which is difficult to maintain airtightness, is highly likely to form a hydrogen/air boundary during start-up/shut-down (SU/SD). Through the accelerated durability evaluation of the 20 W air-cooled PEMFC stack, the purpose of this study was to find out the cause of the degradation of the stack and to contribute to the improvement of the durability of the air-cooled PEMFC stack. In this study, it was possible to evaluate durability in a relatively short time by reducing 20-30% of initial performance by repeating SU/SD 1,000 to 1,200 times on an air-cooled PEMFC stack. After disassembling the stack, each cell was divided into two and the performance analysis showed that the electrode degradation was more severe in the anode outlet membrane electrode assembly (MEA), which facilitates air inflow as a whole, than in the inlet MEA. It was shown that the cathode Pt was dissolved/precipitated to deteriorate the polymer ionomer inside the membrane.

• Nuclear Engineering and Technology
• /
• v.53 no.10
• /
• pp.3413-3420
• /
• 2021

Applying the available neutron flux for medical and industrial purposes is the most important application of research reactors. The neutron radiography system is used for non-destructive testing (NDT) of materials so that it is one of the main applications of nuclear research reactors. One of these research reactors is the 5 MW pool-type light water research reactor of Tehran (TRR). This work aims to investigate on materials and location of the beam tube (BT) of the TRR radiography system to improve the index parameters of BT. Our results showed that a through-type BT with 20 cm thick carbon neutron filter, 1.2 cm and 9.4 cm of the diameter of inlet (D₁) and output (D₂) BT, respectively gives thermal neutron flux almost 25.7, 5.6 and 1.1 times greater than the former design of the TRR (with D₁ = 1.8 cm and D₁ = 9.4 cm), previous design of the TRR with D₁ = 3 cm and D₁ = 9.4 cm, and another design with D₁ = 5 cm and D₁ = 9.4 cm, respectively. Therefore, the design proposed in this paper could be a better alternative to the current BT of the TRR.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.5
• /
• pp.563-571
• /
• 2021

In this study, calcium alginate based cation exchange membrane was prepared and used to develop membrane capacitive deionization (MCDI) system for effective hardness control. As a major result, the MCDI with Ca-alginate membrane showed 27% better deionization capacity than the MCDI with a commercial cation exchange membrane. This superior improvement in the deionization capacity was expected to be due to the high ratio of transport number/electrical resistance (S_c/R_ratio) of Ca-alginate membrane. In addition, the MCDI with Ca-alginate membrane showed better deionization performance than the MCDI with Ca-alginate coating. This was because the space between the electrode and the Ca-alginate membrane was utilized for ion adsorption. The preliminary results indicated that the MCDI with Ca-alginate membrane can be a viable technique for the hardness control.