• Corrosion Science and Technology
• /
• v.6 no.6
• /
• pp.316-321
• /
• 2007

The effect of annealing on the pitting corrosion resistance of anodized Al-Mg alloy (AA5052) processed by equal-channel angular pressing (ECAP) was investigated by electrochemical techniques in a solution containing 0.2 mol/L of $AlCl_3$ and also by surface analysis. The Al-Mg alloy was annealed at a fixed temperature between 473 and 573 K for 120 min in air after ECAP. Anodizing was conducted for 40 min at $100-400A/m^2$ at 293 K in a solution containing 1.53 mol/L of $H_2SO_4$ and 0.0185 mol/L of $Al_2(SO_4)_3$. The internal stress generated in anodic oxide films during anodization was measured with a strain gauge to clarify the effect of ECAP on the pitting corrosion resistance of anodized Al-Mg alloy. The time required to initiate the pitting corrosion of anodized Al-Mg alloy was shorter in samples subjected to ECAP, indicating that ECAP decreased the pitting corrosion resistance. However, the pitting corrosion resistance was greatly improved by annealing after ECAP. The time required to initiate pitting corrosion increased with increasing annealing temperature. The strain gauge attached to Al-Mg alloy revealed that the internal stress present in the anodic oxide films was compressive stress, and that the stress was larger with ECAP than without. The compressive internal stress gradually decreased with increasing annealing temperature. Scanning electron microscopy showed that cracks occurred in the anodic oxide film on Al-Mg alloy during initial corrosion and that the cracks were larger with ECAP than without. The ECAP process of severe plastic deformation produces large internal stresses in the Al-Mg alloy; the stresses remain in the anodic oxide films, increasingthe likelihood of cracks. It is assumed that the pitting corrosion is promoted by these cracks as a result of the higher internal stress resulting from ECAP. The improvement in the pitting corrosion resistance of anodized AlMg alloy as a result of annealing appears to be attributable to a decrease in the internal stresses in anodic oxide films

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.56-56
• /
• 2010

Single-walled carbon nanotubes (SWCNTs) have attracted much attention as a promising material for transparent conducting films (TCFs), due to their superior electrical conductivity, high mechanical strength, and complete flexibility as well as their one-dimensional morphological features of extremely high length-to-diameter ratios. This study investigated three kinds of SWCNTs with different purities: as-produced SWCNTs (AP-SWCNTs), thermally purified SWCNTs (TH-SWCNTs), thermally and acid purified SWCNTs (TA-SWCNTs). The purity of each SWCNT sample was assessed by considering absorption peaks in the semiconducting ($S_{22}$) and metallic ($M_{11}$) tubes with UV-Vis NIR spectroscopy and a metal content with thermogravimetric analysis (TGA). The purity increased as proceeding the purification stages from the AP-SWCNTs through the thermal purification to the acid purification. The samples containing different contents of SWCNTs were dispersed in water using sodium dodecyl benzensulfate (SDBS). Aqueous suspensions of different purities of SWCNTs were prepared to have similar absorbances in UV-Vis absorption measurements so that one can make the TCFs possess similar optical transmittances irrespective of the SWCNT purity. Transparent conductive SWCNT networks were formed by spraying an SWCNT suspension onto a poly(ethyleneterephthalate) (PET) substrate. As expected, the TCFs fabricated with AP-SWCNTs showed very high sheet resistances. Interestingly, the TH-SWCNTs gave lower sheet resistances to the TFCs than the TA-SWCNTs although the latter was of higher purity in the SWCNT content than the former. The TA-SWCNTs would be shortened in length and be more bundled by the acid purification, relative to the TH-SWCNTs. For both purified (TH, TA) samples, the subsequent nitric acid ($HNO_3$) treatment greatly lowered the sheet resistances of the TCFs, but almost eliminated the difference of sheet resistances between them. This seems to be because the electrical conductivity increased not only due to further removal of surfactants but also due to p-type doping upon the acid treatment. The doping effect was likely to overwhelm the effect of surfactant removal. Although the nitric acid treatment resulted in the similar. electrical properties to the two samples, the TCFs of TH-SWCNTs showed much lower sheet resistances than those of the TA-SWCNTs prior to the acid treatment.

• Progress in Medical Physics
• /
• v.26 no.4
• /
• pp.223-228
• /
• 2015

Double-focused micro-Multileaf Collimator (${\mu}MLC$) is able to create radiation fields having sharper dose gradients at the field edges than common MLC. Therefore, ${\mu}MLC$ has been used for the stereotactic radiosurgery (SRS) and Stereotactic Radiotherapy (SRT). We evaluated the dosimetric characteristics of a doublefocused Dynamic-${\mu}MLC$ (DMLC) attached to the Elekta Synergy linear accelerator. For this study, the dosimetric parameters including, Percent Depth Dose (PDD), Leaf leakage and penumbra, have been measured by using of the radiochromic films (GafChromic EBT2), EDGE diode detector and three-dimensional water phantom. All datas were measured on 6 MV x-ray. As a result, The DMLC shows transmission below to 1% and because of double-focused construction of the DMLC, the penumbras of fields with DMLC are independent from the field sizes. In this paper, the resulting dosimetric evaluations proved the applicability of the DMLC attached to the Elekta Synergy linear accelerator.

• Journal of Bio-Environment Control
• /
• v.16 no.1
• /
• pp.62-66
• /
• 2007

This study was carried out to develop the stable plug seedling production for hydroponics of spinaches by various nursery media, plug tray size and seed number per plug tray cell. When plant grown in various nursery media, the seeding stand rate was shown in order of granular rockwool with good water retention, granular rockwool>granular rockwool mixed with pearlite>cocopeat>pearlite>poly urethane foame. Thus, poly urethane foame indicated the lower seedling stand rate. There was no difference in growth of the seedlings md the seeding stand rate by the plug tray size, and no significant difference in the plant height and the number of leaves among the seed number per plug tray cell. But, leaf area of plant in 2 grains seeding per cell was $113.0cm^2$, was wider in compared with 5 grains seeding of which leaf area was $88.0cm^2$. Accordingly, the leaf area per plant decreased as more and more the number of seeds per plug tray cell increased. The fresh weight of a plant per plug tray cell was the heaviest with 12.5g in the 2 grains, and the total fresh weight of plants per cell was 33.9g in 4 grains seeding, thus it tended to was bigger compared with other treatments. Consequently, given that the number of seeds per cell was decreased, the fresh weight of a plant increased. On the other hand, the total fresh weight per cell showed a tendency to be reducing as more and more the number of seeds per plug tray cell decreased. The yield in the 4 grains seeding was increased by 46% as $14,910kg{\cdot}ha^{-1}$ in compared with the yield in 2 grains seeding as $10,200kg{\cdot}ha^{-1}$.

• Journal of Bio-Environment Control
• /
• v.19 no.4
• /
• pp.311-316
• /
• 2010

This study was conducted to investigate the effect of anaerobic fermentation of wheat bran to prevent root-knot nematodes which are infected in plastic house due to over 10 years continuous cultivation of fruits and vegetables. Anaerobic fermentation treatment of wheat bran was done for 20 days by mixture of 2,000 kg fresh wheat bran per 10 are and soil with water in 30 cm soil depth. Chemical treatment of fosthiazate was done by mixture of 6 kg soil for 7 days. Both treatments show suppression of density of rootknot nematodes, especially in anaerobic fermentation treatment. Anaerobic fermentation treatment keeps the low level of root-knot nematode density until 90 days of cultivation and also showed good effect of melon growth. Related with death percentage of melon plant, anaerobic fermentation treatment shows only 3% and also large size of quality fruit but control 65%. Anaerobic fermentation treatment of wheat bran have proved to control the level of root-knot nematodes instead of synthetic chemicals for at least one cropping season and it showed good effect to fruit quality.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.129-132
• /
• 2002

The practical virtual compensator, which uses a dynamic multi-leaf collimator (dMLC) and three-dimensional radiation therapy planning (3D RTP) system, was designed. And the feasibility study of the virtual compensator was done to verify that the virtual compensator acts a role as the replacement of the physical compensator. Design procedure consists of three steps. The first step is to generate the isodose distributions from the 3D RTP system (Render Plan, Elekta). Then isodose line pattern was used as the compensator pattern. Pre-determined compensating ratio was applied to generate the fluence map for the compensator design. The second step is to generate the leaf sequence file with Ma's algorithm in the respect of optimum MU-efficiency. All the procedure was done with home-made software. The last step is the QA procedure which performs the comparison of the dose distributions which are produced from the irradiation with the virtual compensator and from the calculation by 3D RTP. In this study, a phantom was fabricated for the verification of properness of the designed compensator. It is consisted of the styrofoam part which mimics irregular shaped contour or the missing tissues and the mini water phantom. Inhomogeneous dose distribution due to the styrofoam missing tissue could be calculated with the RTP system. The film dosimetry in the phantom with and without the compensator showed significant improvement of the dose distributions. The virtual compensator designed in this study was proved to be a replacement of the physical compensator in the practical point of view.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47 no.3
• /
• pp.201-205
• /
• 2002

This study was carried out to investigate storability and develop suitable storage method for barley. Rough and milled barley such as Olbori(covered barley), Ssalbori(naked barley) and Chalssalbori (waxy naked barley) were packaged in 3P bag and OPP film bag, respectively, and stored at ambient and low temperature warehouse conditions. The weight loss was higher in milled barley than that of rough barley during barley storage. Acid value, one of the most important factor for grain quality evaluation, was increased from 4.9-9.0 mg KOH/100g to 6.5-19.9mg KOH/100g in milled barley at 16 months after storage. Reducing sugar content was increased while germination and water absorption rates were decreased during barley storage period. In terms of penal taste of boiled barley, rough barley could be stored safely more than one year regardless of storage methods where-ase milled barley stored in ambient temperature ware-house produced nasty flavor at 8 to 10 months after storage.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.26 no.2
• /
• pp.105-112
• /
• 2020

As sprout vegetables of interest growing, its maintaining the quality of the technology was needed to solve the problem of increasing growth and maintain quality after harvest. This experiment proved that the quality of radish sprout vegetable was affected by CO₂ treatment during cultivation. Thus, the effect of CO₂ treatment during cultivation on postharvest quality of radish sprout vegetable was investigated in terms of the quality changes in weight loss, gas partial pressure, SPAD, hue angle external appearance during storage at polypropylene film (thickness 30 ㎛) at 10℃. CO₂ treatment used the way to gas with 700 ppm or carbonated water with 700 ppm and 1,400 ppm. The study revealed that growths on CO₂ treated plant were more than those of non-treatment on stem length. After harvesting, the CO₂ treated plant and control growing little different characteristics on fresh weight, plant length and so on. However, there were no differences between the CO₂ treated plant and control on the Fv/Fm and SOD (superoxide dismutase). In gas partial pressure, the O₂ consumption and CO₂ accumulation of the CO₂ treated plant tended to be more than that of non-treated plant. This study also checked that after packaging, the effects of CO₂ treatment during cultivation on the quality of radish sprout vegetable was not significant. However, there were tended to CO₂ treatments were lower value compared to control on SPAD, hue angle and general appearance. CO₂ treatments of radish sprouting vegetable before harvest were improve growth of stem length, but ones were not improving the maintain of quality on radish sprout vegetable during shelf-life period. The results indicated that CO₂ treatment only affected stem elongation until radish sprout vegetable its growth.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.4
• /
• pp.562-572
• /
• 2005

Statement of problem : Titanium is widely used as an implant material lot artificial teeth. Also, studies on surface treatment to form a fine passive film on the surface of commercial titanium or its alloys and improving bioactivity with bone have been carried out. However, there is insufficient data about the biocompatibility of the implant materials in the body. Purpose: The purpose of this study was to examine whether the precipitation of apatite on titanium metal is affected by surface modification. Materials and methods: Specimens chemically washed for 2 minute in a 1:1:1.5 (in vol%) mixture of 48% HF 60% $HNO_3$ and distilled water. Specimens were then chemically treated with a solution containing 97% $H_2SO_4$ and 30% $H_2O_2$ at $40^{\circ}C$S for 1 hour, and subsequently heat-treated at $400^{\circ}C$ for 1 hour. All specimens were immersed in the HBSS with pH 7.4 at $36.5^{\circ}C$ for 15 days, and the surface were examined with TF-XRD, SEM, EDX and XPS. Also, commercial purity Ti specimens with and without surface treatment were implanted in the abdominal connective tissue of mice for 4 weeks. Conventional aluminium and stainless steel 316L were also implanted for comparison. Results and conclusions : The results obtained were summarized as follows. 1. An amorphous titania gel layer was formed on the titanium surface after the titanium specimen was treated with a $H_2SO_4$ and $H_2O_2$ solution. The average roughness was $2.175{\mu}m$ after chemical surface treatment. 2. The amorphous titania was subsequently transformed into anatase by heat treatment at $400^{\circ}C$ for 1 hour. 3. The average thickness of the fibrous capsule surrounding the specimens implanted in the connective tissue was $46.98{\mu}m$ in chemically-treated Ti, and 52.20, 168.65 and $100.95{\mu}m$ respectively in commercial pure Ti, aluminum and stainless steel 316L without any treatment.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.24 no.2
• /
• pp.137-143
• /
• 1991

This study was carried out with sardine to develope a new type of fish protein concentrate. Chopped sardine meat was thermally treated in two different ways, autoclaved at $121^{\circ}C$ for 1 min and boiled at $95^{\circ}C$ for 5 min. The heat treated meat was pressed, controlled to PH 7.8 with $3\%$ (w/v) of $NaHCO_3$ and hot-air dried(at $40^{\circ}C$). The dried meat was powdered (50mesh), air and vacuum packed in laminated film bag(PET/AL. foil/CCP) and stored at room temperature for 60 days. The results of product quality analysis are as follows : 1. Proximate contents of moisture, crude lipid and protein of the autoclaved and boiled product were in the range of $10.0{\~}10.2\%,\;9.0{\~}9.1\%$ and $73.8{\~}74.4\%$, respectively. Yields of the both products were $40\%$ and $32.5\%$. 2. Values of emulsion activity, emulsion stability and foam expansion of the autoclaved product were $48.7\%$, $44.1\%\;and\;44.0\%$, respectively. These values were higher than those of boiled product. 3. Water holding capacity and digestibility of the both products were in the range of $5.0{\~}5.3\%$ and $78.0{\~}78.2\%$, respectively.