• 환경위생공학
• /
• 제13권3호
• /
• pp.141-147
• /
• 1998

Under high temperature and high pressure, cyanogen disinter gration distruction mechanism brought followings results through continuous plug flow reactor system. 1. The temperature was a important reacting factor in cyanogen disintegration. Over $612.8^{\cird}K$ high disintegration rate or 99.99% was shown even under $2000{\;}mg/{\ell}$ cyanogen density. 2. The conditions of cyanogen disintegration was gained through experimenting the supercrietical condition of water in basic. To gain 99.99% disintegration rate under $1000{\;}mg/{\ell}$ early cyanogen density, the pressure showed 52.8 seconds at $523^{\cird}K$ and 84.2 atm and gained $0.56{\;}mg/{\ell}$ operating density. 3. Here is the reaction velocity formula of cyanogen disintegration by hydrolysis: This formula indicates the high possibility of cyanogen disintegration within a short time. And it also implys the potential possibility on treating NBDICOD and the technology in developing the environment cleaning progress as small size automatic controlling equipment.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.1307-1312
• /
• 2009

Design is an act based on multidisciplinary information. The involvement of various stakeholders makes it difficult to process, plan, and integrate. Iteration is frequent in most of the engineering design and development projects including construction. Design iterations cause rework, and extra efforts are required to get the optimal sequence and to manage the projects. The simple project management techniques are insufficient to fulfill the requirements of integrated design. This paper entails two things: design structure matrix and design parameters' information based model. The emphasis has been given to optimal sequence and crucial iteration using design structure matrix analysis technique. The design projects have been studied using survey data from industry. The optimal sequence and crucial iterations results have been utilized for proposed model. Model integrates two things: information about produced- required key design parameters and information of design changes during the design process. It will help to get familiar with Design management in order to fulfill contemporary needs.

• 한국과학교육학회지
• /
• 제10권1호
• /
• pp.95-118
• /
• 1990

This students ideas in science are diverse and unique It is realized that children's preconceptions and misconceptions established before lessoning hgve a crucial in fluence on the following education. so it is meaningful to analyse the children's concept of temperature for the better teaching strategy in this study. This survey of the Elementary school children's concept is designed for the subtopics of temperature as the relation between heat and temperature, He relation between volume(size) and temperature, the temperature of change of state on water, the temperature of substances in the condition of thermal equilibrium. Using Clinical method, this research was executed to 306 children at elementary school. The network method or the analyse of questionnaires were used to analyse the children's response. Findings of this survey are as follow. Students are already familiar with such concept as this increase of temperature by geating, but they think every substance is not the case. Many students appears to believe that the temperature of an object(substance) is related to its size(vloume) Qualitative tasks are difficult than qualitative ones. This trend appear highly in the low grade students. Don't know the temperature of change of state on water and it's stability They think that the temperature is determined by the heating time(period) and the temperature of heating source. Students think, in general that temperature of substance in the condition of thermal equilibrium is different.

• 콘크리트학회지
• /
• 제8권2호
• /
• pp.109-117
• /
• 1996

최근 일본에서는 콘크리트의 성능을 향상시킨 고유동콘크리트에 대한 연구가 활발히 진해되어 일부 실용화단계에 와 있다. 그러나 국내에서는 이러한 고품질의 고유동콘크리트에 대한 연구가 극히 미진한 실정이다. 따라서 본 연구에서는 콘크리트의 유동성에 영향을 미치는 배합인자들의 특성을 파악하여 경제적이고 합리적인 배합방법으로 기존의 재료와 생산설비로서 고유동콘크리트 제조를 목포로 하였으며 아울러 실기시험 및 현장적용실험을 통해 고유동콘크리트의 현장적용 가능성을 평가하고자 한다. 연구결과 배합설계를 통해 기존의 재료와 생산설비로서 우수한 품질을 확보하면서 시공성면에서도 양호한 고유동콘크리트를 제조할 수 있음을 확인하였다.

• 국제학술발표논문집
• /
• The 2th International Conference on Construction Engineering and Project Management
• /
• pp.337-345
• /
• 2007

Nowadays, it is convenient to use 3D modeling tools for general planning before construction. Normally, a 3D model is built with 3D CAD such as 3D Studio Max, Maya, etc. or simply with AutoCAD. All these software packages are effective in building 3D models but difficult to use, because many provided functions and tools require prior knowledge to build both 2D and 3D designs. Moreover, the traditional method of building 3D models is most time-consuming as experienced operators and manual input are required. Therefore, how to minimize the building time of 3D models and provide easy-to-use functions for users who are not familiar with 3D modeling becomes important. In this paper, the VisualLISP programming language is used to create a convenient tool for efficient generation of 3D components for the AutoCAD environment. This tool will be demonstrated with the generation of a 3D sluice, an artificial passage for water fitted with a valve or gate to stop or regulate water flow. With the tool, users only need to enter the parameters of a sluice in the edit box and the 3D model will be automatically generated in a few seconds. By changing parameters in the edit box and pressing the "OK" button, a new 3D sluice model will be generated in a short while.

• Water Engineering Research
• /
• 제3권1호
• /
• pp.57-62
• /
• 2002

This research is intended to integrate long-term operation rules and real time operation policy for conservation & flood control in a reservoir. The familiar Yield model has been modified and used to provide long-term rule curves. The model employs linear programming technique under given physical conditions, i.e., total capacity, dead storage, spillways, outlet capacity and their respective elevations to find required and desired minimum storage fur different demands. To investigate the system behavior resulting from the above-mentioned operating policy, i.e., the rule curves, the simulation model was used. Results of the simulation model show that the results of the optimization model are indeed valid. After confirmation of the above mentioned rule curves by the simulation models, gate operation procedure was merged with the long term operation rules to determine the optimum reservoir operating policy. In the gate operation procedure, operating policy in downstream flood plain, i.e., determination of damaging and non-damaging discharges in flood plain, peak floods, which could be routed by reservoir, are determined. Also outflow hydrograph and variations of water surface levels for two known hydrographs are determined. To examine efficiency of the above-mentioned models and their ability in determining the optimum operation policy, Esteghlal reservoir in Iran was analyzed as a case study. A numerical model fur the solution of two-dimensional dam break problems using fractional step method is developed on unstructured grid. The model is based on second-order Weighted Averaged Flux(WAF) scheme with HLLC approximate Riemann solver. To control the nonphysical oscillations associated with second-order accuracy, TVD scheme with SUPERBEE limiter is used. The developed model is verified by comparing the computational solutions with analytic solutions in idealized test cases. Very good agreements have been achieved in the verifications.

• 한국지역사회생활과학회지
• /
• 제22권1호
• /
• pp.131-143
• /
• 2011

The purpose of this study was to investigate i) the current state of washing knowledge and washing habits ii) the effect of washing behaviors on washing satisfaction. A survey questionnaire was developed and implemented to married women in their 30's or 40's. A total of 210 responses were analyzed by frequency analysis, t-test and ANOVA with PASW18.0. The results are as follows. First, the ways in which women do the laundry was analyzed. Married women in their 30s and 40s usually do the laundry at home and are familiar with washing symbols and do not rely on common sense. Most of them like to rely on the washing machine guidelines for detergent concentration and use the right amount for environmental protection. They also adjust the washing machine setting effectively considering laundry time, water temperature and care label. Second, the groups divided by demographic variables showed meaningful results about washing knowledge. Particularly, there is no significant difference on washing knowledge between housewives and career women. Third, the groups divided by the levels of washing habits showed suggestive results about washing satisfaction. The groups who have correct washing habits generally a indicated high degree of washing satisfaction. Finally, marketing implications for the businesses of laundry, laundromat and the manufacturers of washing machine are suggested.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1998년도 추계 총회 및 학술발표회
• /
• pp.11-14
• /
• 1998

1. Introduction : Research progresses in Chemistry and Chemical Engineering have been made during the last decades with important contributions to the industrial development and to the quality of our life. An interesting case is related to the membrane science and technology continuous impact to innovative processes and products, particularly appropriate for a sustainable industrial growth. Membrane operations have been familiar for many years to biologists and chemists working in their laboratorier or studying biological phenomena. Only recently engineers started to operate in' this area. The preparation of asymmetric CA membranes at University of California, Los Angeles in the early 60s is generally recognized as a crucial moment for membranology (1). Loeb and Sourirajan with their discovery of how to increase significantly the permeability of polymeric membranes without significant changes in their selectivity, made realistic the possibility of their use in large scale operations for desalting brackish and sea water by reverse osmosis and for various other molecular separations in different industrial areas. Reverse osmosis is today a well recognized basic unit operations, togheter with ultrafiltration, crossflow microfiltration,. nanofiltration, all pressure driven membrane processes. Already in 1992 more than 4 milIions m$^3$/day were the total capacity of RO desalination plants and in 1995 more than 180.000 m$^2$ of ultrafiltration membranes were installed for the treatment of wheys and milk (2) (3).

• Journal of Applied Biological Chemistry
• /
• 제59권3호
• /
• pp.255-260
• /
• 2016

활성산소종은 DNA의 손상에서 중요한 역할을 한다. 최근 활성산소를 제어하고 조절하기 위해 천연항산화제를 개발하기 위해 많은 노력이 이루어지고 있다. 느티나무(Zelkova serrate)는 느릅나무과의 식물로 한국 마을 입구에 흔히 심어져 친숙한 식물이다. 하지만 느티나무의 항산화 활성 및 산화적 DNA 손상에 대한 방어효과에 대한 연구는 미흡한 실정이다. 본 연구에서 느티나무 잎의 에틸아세테이트 분획물 및 열수 추출물의 항산화 활성 및 산화적 DNA 손상에 대한 억제활성을 확인하였다. 에틸아세테이트 분획물은 열수 추출물에 비해 DPPH 라디칼 소거활성, ABTS 라디칼 소거활성, $Fe^{2+}$ 킬레이팅 활성 그리고 reducing power에서 높은 항산화 활성을 보였다. 또한, 페놀류 화합물 함량은 각각 에틸아세테이트 분획물은 56.63 mg/g 그리고 열수 추출물은 51.61 mg/g으로 분석됐다. ${\phi}X$-174 RF I plasmid DNA를 이용한 산화적 DNA 손상억제활성은 에틸아세테이트 분획물과 열수 추출물 모두 상당한 방어효과를 나타냈다. 따라서 느티나무 잎의 에틸아세테이트 분획물 및 열수 추출물은 뛰어난 항산화 활성 및 산화적 DNA 손상 억제 효과를 통한 천연 자원으로서의 잠재성을 보였다.

• 한국지구과학회지
• /
• 제31권3호
• /
• pp.288-299
• /
• 2010

본 연구는 과학적 소양은 과학적 지식의 획득과 과학적 담화에 참여할 수 있는 언어적 능력을 통하여 길러진다는 전제하에 대기 중의 물의 상태변화에 관한 학생 글에서 나타나는 의미관계와 과학 언어적 특징을 알아보았다. 중학교 3학년 학생 67명이 참여하여 일상생활에서 흔히 경험할 수 있는 현상과 학교과학교육에서 체계적으로 배우는 현상 에 관한 두 개의 서술형 문항에 대한 글을 작성하였다. 연구의 결과 학생들은 '이슬점' 같은 생소한 용어뿐만 아니라 '수증기', '김' 등과 같은 친숙한 용어에 대해서도 잘못된 의미관계를 형성하고 있었고, 학교과학 교육보다 일상의 경험에서 형성된 지식에서 옳은 의미관계와 잘못된 의미관계 모두 더 많이 나타났다. 일상의 과학적 현상에 대해서는 행위와 절차를 중심으로 한 서술 양상이, 학교 교육에 의해 접하게 된 현상에 대해서는 전문용어와 명사구의 사용 양상이 보였다. 본 연구를 통하여 경험에 기초한 자발적 과정은 풍부한 의미관계 형성에, 형식적이고 이론적인 과정은 명사화를 중심으로 한 전문적이고 추상적인 서술의 측면에서 과학적 언어 능력 발달에 기여함을 알 수 있었다.