• 센서학회지
• /
• 제22권5호
• /
• pp.352-356
• /
• 2013

We developed a novel fabrication method of polydimethylsioxane (PDMS) lens, which can easily control the shapes of the lens using soft lithography with common photolithography and water droplet molding. A mold for PDMS lens was prepared by patterning of hydrophobic photoresist on the hydrophilic substrate and dispensing small water droplets onto the predefined hydrophilic patterns. The size of patterns determined the dimension of the lens and the dispensed volume of the water droplet decided the radius of curvature of the PDMS lens independently. The water droplet with photoresist pattern played a robustly fixed mold for lens due to difference in wettability. The radius of curvature could be calculated theoretically because the water droplets could approximate spherical cap on the substrate. Finally, concave and convex PDMS lenses which could reduce or magnify optically were fabricated by curing of PDMS on the prepared mold. The measured radii of the fabricated PDMS lenses were well matched with the estimated values. We believe that our simple and efficient fabrication method can be adopted to PDMS microlens and extended to micro optical device, lab on a chip, and sensor technology.

• Journal of Mechanical Science and Technology
• /
• 제14권4호
• /
• pp.466-476
• /
• 2000

This paper presents atomization characteristics of a double impinging F -0-0- F type injector with four streams. A phase Doppler particle analyzer was employed to measure the droplet-size and water was used as the inert simulant liquid instead of reactive propellant liquids. The droplet mean diameter (SMD) and size distribution were measured to investigate the effects of the momentum ratio and pressure drop variations. This experimental results can be used during the preliminary design stage of a impinging stream type injector for liquid rockets.

• Korean Chemical Engineering Research
• /
• 제51권6호
• /
• pp.760-765
• /
• 2013

액적기반 미세유체 시스템을 이용해 난백단백질인 라이소자임의 결정화실험을 하였다. Flow-focusing 칩을 이용해 water-in-oil 형태의 액적을 만들고 페트리 디쉬와 십자몰드에 넣은 후, 액적 내부에서 라이소자임 수용액과 침전제 (NaCl) 사이의 액-액 반응을 관찰하였다. 그리고 수용액의 pH가 4.8일 때와 7.2일 때의 결정형태를 비교하였다. 그 결과, pH 4.8에서는 다면체 또는 판상형의 결정이 형성되었고, pH 7.2에서는 침상형 결정이 생성되었다. pH 4.8, 7.2 두 경우 액적이 홀로 있을 때에는 액적부피가 유지되거나 감소하면서 결정이 형성되었다. 하지만 액적이 서로 인접해 있을 때는 액적사이의 상호작용이 관찰되었고, 두 pH에서 다른 경향성을 보였다. pH 4.8에서는 인접한 액적의 부피에 영향을 주어 한 액적의 부피가 커졌고, 부피가 커진 액적에서 결정이 형성되었다. pH 7.2에서는 부피에 영향을 서로 주지 않고 각각의 액적에서 결정이 형성되었다.

• Journal of the Korean Wood Science and Technology
• /
• 제49권1호
• /
• pp.82-92
• /
• 2021

Nakdong technique is an unfamiliar scorching treatment using an iron heated in a kiln over 1000℃. It is a typical convention in Asian countries to treat Nakdong on the surface of paulownia species. The scorching treatment changes the surface characteristics as well as the color of the wood. This study focused on the effects of functional features such as water resistance, anti-mold, anti-termite, and sound improvement because this treatment is usually used on paulownia wood-bodied musical instruments surface. It took 28'57" for Nakdong-iron treated surface to absorb a droplet of water. The absorbance time of iron treated surface was longer than that of torch treated one. There was no noticeable effect on the anti-mold test. On the anti-termite test, there was nearly 3% more mean mass loss on the torch samples than controlled and iron treated ones. In examining the sound radiation coefficient before and after Nakdong treatment, the Nakdong-iron treated surface showed an increase in the average value of 1.2 m4/kg s, which means that it has sound quality improvement. Through this research, the Nakdong technique results are expected to be used as basic-data for further research and give a practical idea for using the traditional treatment method on the wood surface.

• Design & Manufacturing
• /
• 제15권4호
• /
• pp.57-64
• /
• 2021

In recent materials industry, researches on the technology to manufacture super hydrophobic surface by effectively controlling the wettability of solid surface are expanding. Research on the fabrication of super hydrophobic surface has been studied not only for basic research but also for self-cleaning, anti-icing, anti-friction, flow resistance reduction in construction, textile, communication, military and aviation fields. A super hydrophobic surface is defined as a surface having a water droplet contact angle of 150 ° or more. The contact angle is determined by the surface energy and is influenced not only by the chemical properties of the surface but also by the rough structure. In this paper, maskless lithography using DMD, electro etching, anodizing and hot embossing are used to make the polymer resin PMMA surface super hydrophobic. In the fabrication of microstructure, DMDs are limited by the spacing of microstructure due to the structural limitations of the mirrors. In order to overcome this, maskless lithography using a transfer mechanism was used in this paper. In this paper, a super hydrophobic surface with micro and nano composite structure was fabricated. And the wettability characteristics of the micro pattern surface were analyzed.