• 한국지하수토양환경학회지:지하수토양환경
• /
• 제15권5호
• /
• pp.8-15
• /
• 2010

The purpose of this research is to check the validation of an auto-analysis method combined with aqua regia digestion apparatus for improvement of water distillation method used as a fluorine test of soil. Fluorine contents of CaO used in the pretreatment course of water distillation method were 120 mg/kg ~ 5,064 mg/kg at the blank test, which was exceeded up to maximum 12.5 times of the soil standard, so it was estimated due to a effect of fluorine existing as impurities of CaO. The recovery test of the same samples indicated that water distillation method and auto-analysis method were 134.5mg/kg and 161.7mg/kg respectively, the recovery ratio of the latter was 16.8% higher than the formal. The validation test of two methods satisfied the standard, but auto analysis method was excellent more than distillation method. Also, auto analysis method could save a analysis time up to maximum 4.7 times by comparison with water distillation method.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.201-201
• /
• 2010

The evaporative desalination system with solar energy would be the efficient and attractive method to get fresh water. This study was described the development of Multi Effect Distillation(MED) with solar energy desalination system. The system was designed and manufactured Multi effect distillation on the capacity of $3m^3$/day. The experimental apparatus consists mainly of ejector pump, Hot water pump, flow meter, demister, cooler, evaporator and condenser. Evaporator and condenser were made Shell&Tube Heat Exchanger type with corrugated tube. The experimental variables were chosen $75^{\circ}C$ for hot water inlet temperature, 40, 60 and $80{\ell}$/min for hot water inlet volume flow rate, 6.0 and $8.0{\ell}$/min for evaporator feed seawater flow rate, $18^{\circ}C$ for sea water inlet temperature to cover the average sea water temperature and the salinity of sea water is measured about 33,000 PPM (parts per million). for a year in Korea. This study was analyzed the results of thermal performance of Multi Effect Distillation. The results are as follows, The experimental Multi effect distillation is required about 40 kW heat source for production of $3m^3$/day fresh water. Various operating flow rate was confirm in the experiments to get the optimum design data and the results showed that the optimum total flow was $8.0{\ell}$/min. Comparison of Single Effect Distillation with Multi Effect Distillation showed MED is at least more than double of SED.

• 청정기술
• /
• 제14권2호
• /
• pp.129-135
• /
• 2008

이축연신 나이론 막을 사용한 단일투과증발막 셀을 이용하여 공급액의 온도 및 농도에 따른 투과실험식을 구하고, 투과증발막 모듈을 사용하여 이 실험식의 적합성 및 투과시 소요되는 소비에너지를 산출하였다. 투과증발막 모듈을 이용해서 투과측의 압력이 2 mmHg와 20 mmHg의 경우 공급액의 에탄올 농도 90 wt%를 99.5 wt%로 농축시키는 경우, 투과측압력이 2 mmHg일 때가 20 mmHg일 때에 비해 동일조건의 에탄올 농축을 위한 막의 면적이 증가하였다. 각 압력의 조건에서 나이론 막을 이용한 membrane-aided distillation의 모사를 한 막의 투과속도 및 선택성에 대한 실험식을 도출하고 이를 이용하여 10 wt%의 에탄올 수용액을 99.5 wt%로 농축하는 membrane-aided distillation공정의 소비에너지를 구하였다. 그 결과 막의 투과량이 과다한 경우 다시 증류탑에서 재 농축을 해야하므로 막에 의한 에너지소비 절감효과가 상쇄될 수 있음을 보여주었다. 따라서 이 공정에 의해 에탄올을 농축하는 경우 효과적으로 에너지를 절약하기 위해서는 막의 선택성이 매우 중요하다는 것을 보여주었다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 제33회 추계학술대회논문집
• /
• pp.89-92
• /
• 2009

고농도 과산화수소를 추진제로 이용하는 연구가 활발해짐에 따라서 고농도 과산화수소의 국내 생산을 위한 과산화수소 증류에 관한 연구가 필요하게 되었다. 과산화수소의 열분해를 막기 위하여 진공 증류법을 이용하였으며, 증류 압력은 Raoult's law를 이용하여 $40^{\circ}C$ 이하에서 증류가 이루어 질 수 있도록 30 torr로 선정하였다. 실험을 위한 변수로는 증류 온도를 선정하였으며, 증류에 걸린 시간과 증류 후에 계산한 수득율을 성능 평가 대상으로 선정하였다. 실험 결과, 대체로 증류에 소요된 시간이 짧을수록 수득율이 낮으며, 리시버 내의 물의 과산화수소 농도도 더 높은 것을 확인하였다. 또한 비슷한 시간 동안 증류를 수행하였을 경우, 증류 온도가 높을수록 더 높은 농도에 도달하며, 수득율이 낮은 경향을 보였다.

• Membrane and Water Treatment
• /
• 제2권3호
• /
• pp.147-158
• /
• 2011

Membrane distillation process was used for desalination of hot (333 K) geothermal water, which was applied in the plant producing heating water. The investigated water contained 120 g salts/$dm^3$, mainly NaCl. The mineral composition was studied using an ion chromatography method. The obtained rejection of solutes was closed to 100%, but the small amounts of $NH_3$ also diffused through the membrane together with water vapour. However, the composition of obtained distillate allowed to use it as a makeup water in the heating water system. The geothermal water under study was concentrated from 120 to 286 g NaCl/$dm^3$. This increase in the solution concentration caused the permeate flux decline by a 10-20%. The geothermal water contained sulphates, which was subjected to two-fold concentration to achieve the concentration 2.4-2.6 g $SO{_4}{^{2-}}/dm^3$ and the sulphates then crystallized in the form of calcium sulphate. As a results, an intensive membranes scaling and the permeate flux decline was observed. The XRD analysis indicated that beside the gypsum also the NaCl crystallites were deposited on the membrane surfaces. The fresh geothermal water dissolved the mixed $CaSO_4$ and NaCl deposit from the membrane surface. This property can be utilized for self-cleaning of MD modules. Using a batch feeding of MD installation, the concentration of geothermal water was carried out over 800 h, without significant performance losses.

• Membrane and Water Treatment
• /
• 제6권3호
• /
• pp.237-249
• /
• 2015

In this study we investigate a laboratory scale vacuum membrane distillation system to produce pure water from model oil in water emulsion. Experimental determination of liquid entry pressure (LEP) of a commercial Durapore$^{TM}$ GVPH flat sheet membrane using model emulsions in various oil concentrations has been carried out. Two different methods of liquid entry pressure determination - a frequently used, so-called static and a novel dynamic method - have been investigated. In case of static method, LEP value was found to be 2.3 bar. No significant effect of oil content on LEP was detected up to 3200 ppm. In contrast, LEP values determined with dynamic method showed strong dependence on the oil concentration of the feed and decreased from 2.0 bar to a spontaneous wetting at 0.2 bar in the range 0-250 ppm, respectively. Vacuum membrane distillation tests were also performed. The separation performance is evaluated in terms of flux behavior, total organic carbon removal and droplet size distribution of the feed and final retentate. No significant effect of oil content on the flux was found ($5.05{\pm}0.31kgm^{-2}h^{-1}$) up to 250 ppm, where a spontaneous wetting occurred. High separation performance was achieved along with the increasing oil concentration between 93.4-97.0%.

• Membrane and Water Treatment
• /
• 제6권6호
• /
• pp.451-476
• /
• 2015

Membrane distillation (MD), which can utilize low-grade thermal energy, has been extensively studied for desalination. By incorporating solar thermal energy, the solar membrane distillation desalination system (SMDDS) is a potential technology for resolving the energy and water resource problems. Small-scale SMDDS (s-SMDDS) is an attractive and viable option for the production of fresh water for small communities in remote arid areas. The minimum-cost design and operation of s-SMDDS are determined by a systematic method, which involves a pseudo steady state approach for equipment sizing and the dynamic optimization using overall system mathematical models. The s-SMDDS employing three MD configurations, including the air gap (AGMD), direct contact (DCMD) and vacuum (VMD) types, are optimized. The membrane area of each system is $11.5m^2$. The AGMD system operated for 500 kg/day water production rate gives the lowest unit cost of $5.92/m^3$. The performance ratio and recovery ratio are 0.85 and 4.07%, respectively. For the commercial membrane employed in this study, the increase of membrane mass transfer coefficient up to two times is beneficial for cost reduction and the reduction of membrane heat transfer coefficient only affects the cost of the DCMD system.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.240-245
• /
• 1990

A on-line optimization scheme based on model in a binary distillation process is proposed. A reduced-order model utilized the concept of collocation is used as a process model and the recursive prediction error method is employed to identify the reduced-order model. The concentrations of end products are controlled by nonlinear adaptive predictive control algorithm. The objective function is constructed to find optimum operate condition for saving utility cost. The proposed optimization is scheme is tested through simulation studies in 13-staged water-methanol distillation column.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.229-233
• /
• 1990

A new on-line optimization technique of a distillation column is presented. The equation decoupling method and the simultaneous solution method are combined to simulate the distillation process. The storage requirement is small enough to run on a PC. A improved successive quadratic programming is used to find the optimum operating conditions. The optimizer is intensively tested by using the dynamic simulator, SPEEDUP. After this, the technique is applied to a binary distillation column that treats methanol and water.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제5권3호
• /
• pp.196-201
• /
• 2000

Lactic acid is of interest as the raw materials of polyactide that is a biodegradable polymer. For an effective purification of acid, batch distillation with the simultaneous reactions was used. Two Oldershow colums and reboilers were usde for fractionation of methanol and reactions. Two Oldershaw columns and reboilers were used for fractionation of methanol and reactions. Esterification reaction of lactic with methanol produced methyllactate and water. The productes of the esterification reaction, methl lactate and water were transported to the reboiler of the reproysis part. In hydroduced in the hydrolysis part and nureacter method lactic acid and methanol. Methanol produced in the hydroysis part and unreacted method lactic acid and methanol in the esterification part were separated by distillation and recycled to the revoiler of the esterification part so that the esterification reaction would be stimulated. Thus, pure lactic acid solution remained in the reboiler of the hydroysis part. The effect of the number of stages in column on the recovery yield was also inverstigated. In the operation with colums improved the fractionation of componets and stimulated the reactions in two parts.