• Economic and Environmental Geology
• /
• v.43 no.2
• /
• pp.85-100
• /
• 2010

Devonian Cairn Formation is one of the important hydrocarbon reservoirs in Alberta, Canada. However, the Cairn Formation, outcropped in the study area, is not prospective reservoir with poor porosity and permeability by some late diagenetic processes. In this study, geochemical characteristics of the Cairn Formation were studied to use these preliminary results for advanced geological and geophysical petroleum explorations in the near future. Rock-Eval pyrolysis showed that total organic carbon content is less than 0.3 wt.%, indicating a minor amount of bitumen and/or other hydrocarbons. The carbonates in the Cairn Formation are mainly composed of subhedral and anhedral dolomites. Pore sizes in the carbonate are various, ranging from nanometer to micrometer. Clastic sediments increase in the upper and lower parts of the Cairn Formation, probably due to changing its depositional conditions. The Cairn Formation can also be divided into several intervals based on Ca/Mg ratio in dolomite and degree of amount of calcite. These could be formed by different sedimentary environment, degree of cementation and recrystallization, different saline/fresh water, etc.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.4 no.2
• /
• pp.77-85
• /
• 1996

The study on the ripening of leather waste sludge was performed to vemistabilize the sludge effectively using a laboratory scale darkened wood box reactor ($10{\times}10{\times}20cm$). The acceptable feed conditions for earthworm of Eh, alkalinity were obtained in the 30th and 35th days, respectively. The value of pH was gradually decreased from 7.8 to 7.1 through the ripening time. The contents of heavy metals of the ripened sludge were estimated as lower levels compared to the other regulatory standards for compost. After the ripening time for 50days, the physico-chemical properties of the sludge were estimated as pH 7.1, water content 72%, redox potential 85mV, electrolytic conductivity $2,620{\mu}mhos/cm$ and alkalinity 450 ppm as $CaCO_3$, respectively. In the ripened sludge, survival rate of the earthworms for 50 days was about 75%, and the live weight increase rate was about 230% at the temperature range of $20{\sim}25^{\circ}C$. Moreover, hatching rate of the earthworm cocoons was about 87% and the highest value was obtained in the 20~30th days. From the above results, it was evaluated that leather waste sludge could be vermistabilized effectively by earthworms, when the sludge was ripened during 50 days.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.11 no.2
• /
• pp.117-124
• /
• 2003

The purpose of this study was to investigate the optical conditions to satisfied the salt concentration of 1% below of compost produced by using the material of foodwaste and sawdust. We changed the mixing ratios of foodwaste : sawdust from 7:3 to 3:7 and the ratios of foodwaste : rice hull from 6.5:3.5 to 4:6. We analyzed C/N, pH, temperature, water content, volatile solid, salt, heavy metals to check the degree of composting. The running conditions of composting were $80{\sim}133{\ell}/min{\cdot}m^{3}$ of air flow rate, 1:4 of time interval(on:off) and 7days of turning interval. Running times were 28days. The optical mixing ratio of foodwaste : sawdust was 6:4 when we compared many factors. Especially when the mixing ratios of foodwaste : sawdust or foodwaste : sawdust were 7:3 or 6:4, the composting was not accomplished by the reason of low C/N. The concentrations of heavy metal were sufficiently low to satisfied the satandard of organic compost. The salt concentration was 0.43%-0.46% that was the half of initial concentration. The rice hull was the good in pore rate and 통기성, and so it can used alternative material.

• The Journal of Engineering Geology
• /
• v.20 no.1
• /
• pp.35-45
• /
• 2010

The soil tests have been performed on the specimens obtained from about 1,150 sites including landslides and non-landslides areas in natural terrains for last 10 years. Based on the results of those tests, the average soil properties are estimated and the simple equations for estimating permeability are proposed according to geologic conditions. The average permeability in Granite and Mudstone sites is higher than other sites and the content of silt and clay in Mudstone and Gneiss sites is higher than other sites. The correlation analysis and the regression analysis were performed to estimate the coefficient of permeability according to geological conditions. As the result of the correlation analysis, the coefficient of permeability is selected as a dependent variable, and the silt and clay contents, the water contents and the dry unit weights are selected as independent variables. As the result of the regression analysis, the silt and clay contents and the void ratio were involved commonly in the linear regression equations according to geological conditions. To verify the proposed the linear regression equations, the measured result of the coefficient of permeability at other sites was compared with the result predicted with the proposed equations. As the result of comparison, there were a little bit different between them for some data. However the difference was relatively small. Therefore, the linear regression equations for estimating the coefficient of permeability according to geological conditions may be applied to Korean soils. However, these equations should be verified and corrected continuously to improve the accuracy.

• Food Science of Animal Resources
• /
• v.25 no.3
• /
• pp.265-270
• /
• 2005

This study was carried out to investigate the effects of washing times on quality characteristics of chicken breast surimi. The surimi was prepare after 2 (C), 4 (T1) and 6 (T2) times washed with a ratio 6 : 1 distilled water-chicken breast meat. The moisture and crude protein content of T1 and T2 were higher than that of C. The myofibrillay protein and yield of C was higher (p<0.05) than those of T1 and T2. The pH of C was higher (p<0.05) compare to other treatments. The WHC was no significant differences between the all treatments. The shear force of all treatments were tended to higher as washing times increased. The breaking force and deformation value of T2 were lower than other treatments. The $L^{*}$ values in C and $b^{\ast}$ values in T1 were significantly (p<0.05) lower among the treatments group. The hardness and gumminess of T1 was higher (p<0.05) compared to T2. The springiness of treatments increased as washing times increased. The sensory score of surimi made from chicken breast meat was not affected by the washing times.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.35 no.4
• /
• pp.55-66
• /
• 1993

Upon freezing a soil swells due to phase change and its compression stress increase a lot. As the soil undergo thawing, however, it becomes a soft soil layer because the 'soil changes from a solid state to a plastic state. These changes are largely dependent on freezing temperature and repeated freezing-thawing cycle as well as the density of the soil and applied loading condition. This study was initiated to describe the effect of the freezing temperature and repeated freezing-thawing cycle on the unconfined compressive strength. Soil samples were collected at about 20 sites where soil structures were installed in Kangwon provincial area and necessary laboratory tests were conducted. The results could be used to help manage effectively the field structures and can be used as a basic data for designing and constructing new projects in the future. The results were as follows ; 1. Unconfined compressive strength decreased as the number of freezing and thawing cycle went up. But the strength increased as compression speed, water content and temperature decreased. The largest effect on the strength was observed at the first freezing and thawing cycle. 2. Compression strain went up with the increase of deformation speed, and was largely influenced by the number of the freezing-thawing cycle. 3. Secant modulus was responded sensitivefy to the material of the loading plates, increased with decrease of temperature down to - -10$^{\circ}$C, but was nearly constant below the temperature. Thixotropic ratio characteristic became large as compression strain got smaller and was significantly larger in the controlled soil than in the soil treated with freezing and thawing processes 4. Vertical compression strength of ice crystal(development direction) was 3 to 4 times larger than that of perpendicular to the crystal. The vertical compression strength was agreed well with Clausius-Clapeyrons equation when temperature were between 0 to 5C$^{\circ}$, but the strength below - 5$^{\circ}$C were different from the equation and showed a strong dependency on temperature and deformation speed. When the skew was less then 20 degrees, the vertical compression strength was gradually decreased but when the skew was higher than that, the strength became nearly constant. Almost all samples showed ductile failure. As considered above, strength reduction of the soil due to cyclic freezing-thawing prosses must be considered when trenching and cutting the soil to construct soil structures if the soil is likely subject to the processes. Especially, if a soil no freezing-thawing history, cares for the strength reduction must be given before any design or construction works begin. It is suggested that special design and construction techniques for the strength reduction be developed.

• International Journal of Highway Engineering
• /
• v.7 no.3 s.25
• /
• pp.31-42
• /
• 2005

This study evaluates the physical mechanical properties, durability and sound absorbtion of porous concrete for pavement according to content of silica fume and steel fiber to elicit the presentation of data and the way to enhance its function for the practical field application of porous concrete as a material of pavement. The results of the test indicate that in every condition, the void ratio and the coefficient of water permeability of porous concrete for pavement satisfy both the domestic standards and proposition values. Among the properties of strength, the compressive strength satisfies the standards in the specification of Korea National Housing Corporation as for every factor of mixture but in the case of the flexural strength, more than 0.6vol.% of steel fiber satisfied the Japan Concrete Institute proposition values. The mixture of silica fume and steel fiber presents the excellent intensity, though. The case when silica fume and steel fiber are used simultaneously presents the strongest durability because the durability shows the similar tendency to the dynamic characteristics. The case when 10wt.% of silica fume and 0.6vol.% of steel fiber are used at the same time shows that the loss rate of mass by Cantabro test became 27% better and freeze-thaw resistance became 60% better. As for the characteristics of sound absorption of porous concrete for pavement, Noise Reduction Coefficient is 0.48 to prove that it possesses almost 50% sound absorption.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.4
• /
• pp.431-449
• /
• 2020

Structural property of most hydrogels is soft, resulting in low mechanical performance that limits their usage in the biomedical applications. For overcoming the drawback, cellulose nanocrystals (CNCs) were adopted in this study. Effects of CNCs on characteristics and drug delivery performance of poly (vinyl alcohol) based hydrogels were explored. FT-IR results showed that the fabricated hydrogels had semi-IPN (semi-interpenetrating polymer network) by formation of acetal and aldehyde bridge. Water absorption and swelling ratio decreased with increasing CNCs content, and the hydrogels with CNCs showed better viscoelastic performance than the without CNCs. Also, CNCs mostly improved the ability of the hydrogel to absorb the drug and the sustainability of the drug release. These results demonstrated that incorporating CNCs into the hydrogel systems can be a good alternative to improve drug delivery performance and mechanical property of the hydrogels.

• Membrane Journal
• /
• v.16 no.3
• /
• pp.221-229
• /
• 2006

This study is about the preparation and characterization of sulfonated random copolymer membranes containing perfluorocyclobutane (PFCB), fluorenyl, and sulfonyl units. The polymers were prepared through three synthetic steps, that is, the synthesis of a trofluorovinylether-terminated monomer, its thermal polymerization, and post-sulfonation using chlorosulfonic acid. A series of sulfonated random copolymers with different ion exchange capacity (IEC) were prepared by changing contents of fluorenyl uints in polymers with fixed molar ratio of chlorosulfonic acid during the post-sulfonation reaction. All the synthesized compounds were characterized by FT-lR, $^1H-NMR$, $^{19}F-NMR$, and Mass spectroscopy. As the content of sulfonated fluorenyl units increased, the IEC, water uptake, and ion conductivity of the sulfonated random copolymer membranes increased. The sulfonated random copolymer S-1 and S-2 showed higher values of ion conductivity than the Nafion-115 in a wide range of temperatures ($25{\sim}80^{\circ}C$).

• Korean Journal of Soil Science and Fertilizer
• /
• v.11 no.2
• /
• pp.105-112
• /
• 1979

A study was carried out to examine the effects of sulfur dioxide gas on soybean plants; at two concentrations(0.2mg/l and 0.5mg/l) and in different fumigation periods, The grain yield of soybeans, sulfur and chlorophyll contents in leaves, and ratios of destroyed leaf were investigated, 1) At the concentration of $SO_2$ 0.5mg/l, a) The yield decrease were 52% and 76.4% at 5 minutes and one houre fumigation period respectively, b) The sulfur contents in leaves were positively correlated with fumigation period and yield decrease, however the water soluble sulfur was superior than the total sulfur in correlation coefficient. 2) At the concentration of $SO_2$ 0.2mg/l; a) The most severe destruction of leaves were observed at noon exposure (10:00-11:00 O'clock) and no visible damage was observed at night exposure (22:00-23:00) b) The sulfur contents in leaves and stems were the highest at noon exposure and the lowest at evening exposure (18:00-19:00 O'clock) chlorophyll contents were the highest at night exposure but, the lowest at noon exposure, c) The ratio of destroyed leaf was positively correlated with the sulfur content of leaves, but negatively correlated with chlorophyll contents. d) Absorbance spectra of chlorophyll in the chlorolast were greatly decreased at noon exposure but slightly decreased at night exposure. The decrease of absorbance spectra was mainly at $456m{\mu}$ and $663m{\mu}$.