• Membrane Journal
• /
• v.21 no.1
• /
• pp.1-12
• /
• 2011

Partially fluorinated poly(arylene ether sulfone) block ionomer membranes with different branch degree for fuel cell applications were investigated. A sulfonable monomer, a non-sulfonable monomer and a trifunctional branching agent were synthesized and the sulfonable monomer was oligomerized to obtain block structures. The oligomer was then further polymerized with the non-sulfonable monomer and the branching agent. The mole ratio of oligomer : non-sulfonable monomer was fixed at 4:6 and the content of the branching agent was varied from 0 to 2 mol% (BBC-40Bx). Post-sulfonation of BBC-40Bx was carried out using chlorosulfonic acid (CSA) (SBBC-40Bx). All the synthesized compounds were characterized by $^1H$-NMR, $^{19}F$-NMR and FT-IR. It was confirmed that the ion exchange capacity (IEC), water uptake and ion conductivity of SBBC-40Bx increased with the increment of branching agent content.

• Journal of Navigation and Port Research
• /
• v.39 no.6
• /
• pp.485-491
• /
• 2015

The technology review about risk of hypothermia of victim according to heat transfer characteristic of life raft and sea state can use accident correspondence of standing and sinking of ship. This study studied heat transfer characteristics required for the design of life raft and thermal insulation property analysis and evaluation methods. In addition, it is study for comprehend the risk of hypothermia and suggest analysis result that is experiment of thermal insulation property and body temperature property for decide of prediction the body temperature decline Thermal Analysis apply the finite element analysis method is comprehended the property of heat conductivity, convective effect of sea water and properties changes according to property of insulation material. it measure the heat flux with attach temperature sensor on body in order to comprehend the variation of body temperature with boarding a life raft experiment on a human body. This study validate results by comparing variation of temperature measured from experiment on a body with variation of temperature from finite element analysis model. Also, the criteria of hypothermia was discussed through result of finite element analysis.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.22 no.3
• /
• pp.57-68
• /
• 2017

Continuous monitoring of spatial and temporal changes in key marine environmental parameters such as SST (sea surface temperature) near IORS (Ieodo Ocean Research Station) is demanded to investigate the ocean ecosystem, climate change, and sea-air interaction processes. In this study, we aimed to develop the system for continuously measuring SST using a TIR (thermal infrared) sensor mounted at the IORS. New SST algorithm is developed to provide SST of better quality that includes automatic atmospheric correction and emissivity calculation for different oceanic conditions. Then, the TIR-based SST products were validated against in-situ water temperature measurements during May 17-26, 2015 and July 15-18, 2015 at the IORS, yielding the accuracy of 0.72-0.85 R-square, and $0.37-0.90^{\circ}C$ RMSE. This TIR-based SST observing system can be installed easily at similar Ocean Research Stations such as Sinan Gageocho and Ongjin Socheongcho, which provide a vision to be utilized as calibration site for SST remotely sensed from satellites to be launched in future.

• Korean Journal of Ecology and Environment
• /
• v.40 no.3
• /
• pp.431-438
• /
• 2007

This study was to test algal removal efficiency by top-down fish biomanipulation experiments in the laboratory during Agust${\sim}$September 2000. We selected eight candidate fishes for the biomanipulation. We set up the experiments of eight fish-treatment tanks (3${\sim}$6 fishes) with initial chlorophyll-${\alpha}$ concentrations (CHL-${\alpha}$) of $100{\sim}120{\mu}g\;L^{-1}$ and one control tank including no fish with the same initial CHL-${\alpha}$. All tanks were maintained water quality of dissolved oxygen $(5.3{\sim}8.2mg\;L^{-1})$ and pH $(7.4{\sim}8.1)$ in the tests. During the biomanipulation, DO and pH in the treatments were lower than those of the control, while conductivity increased gradually in the treatments. Biomanipulation experiments showed that CHL-${\alpha}$ increased 13% and 0% (mean values of 8 fishes) in the controls and treatments, respectively. These results indicate that algal growth was maintained in the control and fish treatments, but the rate of CHL-${\alpha}$ in the treatments was lower than that of the control. The removal rates of bluegreens algae decreased 32% in the control, and 20% in treatments (mean values of 8 fishes) respectively, In other words, bluegreen algae showed greater growth rate in the fish treatments than the control and this was due to higher nutrients supplied from fish excretions. Overall, simple fish biomanipulation on algal control was not effective at all in these laboratory tests.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.3
• /
• pp.394-399
• /
• 2011

This study evaluated the effect of using waste nutrient solution (WNS) and reclaimed wastewater (WW) on the growth of Chinese cabbage and soil quality. The pH and electrical conductivity (EC) values of waste nutrient solution were 6.3 and $1.5dS\;m^{-1}$ and being 6.8 and $0.4dS\;m^{-1}$ in reclaimed WW, respectively. WNS found to be included more than $10g\;m^{-2}$ of $NO_3^-$, $K^+$, $SO_4^{2-}$ and $Ca^{2+}$, thereby enhancing Chinese cabbage growth. However, $Cl^-$ and $Na^+$ contents were higher than other nutrients in WW. Among the three irrigation resources, no significant differences were found for the growth of Chinese cabbage plants. On the other hand, pH was decreased in WNS-treated soil when compare to that in WW-treated soil which pH was increased. In spite of the uptake of nutrients by the growing plants, irrigation of the WNS led to an increase in available $P_2O_5$ and exchangeable cations such as $K^+$ and $Mg^{2+}$ in the soil when compared to soil that irrigated by groundwater or WW. Taken together, the use of WNS can remarkably reduce the amount of the chemical fertilizer for Chinese cabbage production; however, WNS can possibly cause a problem as nutrients accumulation in soil.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.5
• /
• pp.859-865
• /
• 2011

This study looked into 110 sites of orchard fields to investigate the relationships between the physical and chemical properties of soils, including heavy metal contents, and the topographic characteristics of the fields in Jeonbuk province. The topographic distribution of orchard fields in Jeonbuk province was local valley and fans, hilly and mountains, mountain foot slopes, alluvial plains, diluvium, and fluvio-marine deposits. Forty-six percent (46%) of total orchard fields were located in the hilly and mountains. Soil texture of the local valley and fans was mostly sandy clay loam, and the soil texture of other topographical sites were varied. Bulk density, porosity, and soil hardness were not different among the various topographic sites. The content of plant available water was the highest (19.5%) in the sites of diluvium. Soil pH, electrical conductivity (EC), and exchangeable $Mg^{2+}$ content were the highest in the sites of fluvio-marine deposits, whereas the contents of soil organic matter (SOM), available phosphorus, and exchangeable $Ca^{2+}$, $K^+$, and $Na^+$ were not significantly different among the topographic sites. Also, soil pH and SOM content were generally in optimal ranges for the fruit plants in the orchard fields, but other values were mostly higher than those in optimum. In addition, the contents of heavy metals were much lower than the levels of Soil Contamination Warning Standard.

• Applied Chemistry for Engineering
• /
• v.32 no.6
• /
• pp.664-670
• /
• 2021

Stainless steel was applied as bipolar plate (BP) of polymer electrolyte membrane fuel cell (PEMFC) due to high mechanical strength, electrical conductivity, and good machinability. However, stainless steel was corroded and increased contact resistance resulting PEMFC performance decrease. Although the corrosion resistance could be improved by surface treatment such as noble metal coating, there is a disadvantage of cost increase. The stainless steel corrosion behavior and passive layer influence on PEMFC performance should be studied to improve durability and economics of metal bipolar plate. In this study, SUS316L bipolar plate of 25 cm² active area was manufactured, and experiments were conducted for corrosion behavior at an anode and cathode. The influence of SUS316L BP corrosion on fuel cell performance was measured using the polarization curve, impedance, and contact resistance. The metal ion concentration in drained water was analyzed during fuel cell operation with SUS316L BP. It was confirmed that the corrosion occurs more severely at the anode than at the cathode for SUS316L BP. The contact resistance was increased due to the passivation of SUS316L during fuel cell operation, and metal ions continuously dissolved even after the passive layer formation.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.3
• /
• pp.903-913
• /
• 2021

Three-type PVC membranes denoted by AEM-1, AEM-2, and AEM-3 with a cross-linked anion-exchange group were prepared by substitution reaction of PVC with triethyldiamine (TEDA), 1,4-dimethylpiperazine (DMP), and 1,4-bis(imidazol-1-ylmethyl)benzene (BIB) in cyclohexanone, respectively. We confirmed the successful preparation of the AEM-1, AEM-2, and AEM-3 via ionic conductivity (S/cm), water uptake (%), contact angle, ion-exchange capacity (m_eq/g), thermal properties, SEM and XPS analysis, respectively. The electrochemical capacitor experiments using PVC membrane with cross-linked anion-exchange group in organic electrolytes were performed. The prepared AEM-1, AEM-2 AEM-3 have a good stability by charge and discharge performance in organic electrolyte. As a result, the AEM-2 and AEM-3 membrane based on PVC prepared by the solvent casting method after substituent reaction is suitable for the use as a separator in organic electrochemical capacitor (supercapacitor).

• Journal of Drive and Control
• /
• v.17 no.4
• /
• pp.133-140
• /
• 2020

Traction performance of a tractor varies depending on soil conditions. Sinkage and slip of the driving wheel for tractor frequently occur in a reclaimed land. The objective of this study was to develop a tractor suitable for a reclaimed land. Traction performance was evaluated according to soil conditions of reclaimed land and paddy field. Field experiments were conducted at two test sites (Fields A: paddy field; and Field B: reclaimed land). The tractor load measurement system was composed of an axle rotation speed sensor, a torque meter, a six-component load cell, GPS, and a DAQ (Data Acquisition System). Soil properties including soil texture, water content, cone index, and electrical conductivity (EC) were measured. Referring to previous researches, the tractor traveling speed was set to B3 (7.05 km/h), which was frequently used in ridge plow tillage. Soil moisture contents were 33.2% and 48.6% in fields A and B, respectively. Cone index was 2.1 times higher in field A than in field B. When working in the reclaimed land, slip ratios were about 10.5% and 33.1% for fields A and B, respectively. The engine load was used almost 100% of all tractors under the two field conditions. Traction powers were 31.9 kW and 24.2 kW for fields A and B, respectively. Tractive efficiencies were 83.3% and 54.4% for fields A and B, respectively. As soil moisture increased by 16.4%, the tractive efficiency was lowered by about 28.9%. Traction performance of tractor was significantly different according to soil conditions of fields A and B. Therefore, it is necessary to improve the traction performance of tractor for smooth operations in all soil conditions including a reclaimed land by reflecting data of this study.

• Korean Journal of Environmental Agriculture
• /
• v.40 no.1
• /
• pp.33-39
• /
• 2021

BACKGROUND: Globally, large amounts of phosphogypsum (PG), which is a by-product of the phosphate fertilizer production, is deposited in open areas. As PG contains calcium, phosphate, and sulphate, it can be used as a soil amendment in farmlands. This study was conducted to investigate the effects of PG application on properties of field soil and yield and quality of garlic (Allium sativum L.), and to seek appropriate level of PG application into the field. METHODS AND RESULTS: This experiment was conducted by applying PG at four different levels that were adjusted based on 65% calcium base saturation in the field soil: 0% (control), 50% (PG50, 100 kg/10a), 100% (PG100, 200 kg/10a), and 150% (PG150, 300 kg/10a). Following cultivation, soil electrical conductivity (EC), organic matter, available P and exchangeable Ca increased, whilst soil pH decreased. With increase in PG application level, soil EC and exchangeable Ca increased. PG application increased concentrations of water soluble Ca and SO4 across the soil profile, especially in PG150. The highest yield of garlic was found in PG100 treatment. The plant's uptake for N, P, Ca, and S increased by PG applications, but that for K decreased. Moreover, concentrations of S-related amino acids such as cysteine and methionine in garlic increased by PG applications. The increased content of nutrients and amino acids with PG supply might improve yield, quality, and favor of the crop. CONCLUSION: Overall, PG application at 200 kg/10a into a field had the best effect on improving soil fertility as well as yield and quality of garlic. Further studies are required to maximize efficiencies of PG supply in soil management and production of various crops.