• 펄프종이기술
• /
• 제40권2호
• /
• pp.1-7
• /
• 2008

The trend of using more hardwood and recycled fibers, and closing more tightly of the paper mill white water system has resulted in build-up of fines as well as organic and inorganic contaminants in the white water. This changes in papermaking wet end requires developing chemical additive system that provides good fiber retention and drainage in closed white water system. In this study the effect of charge densities and chemical characteristics of microparticle systems consisted of cationic guar gums and anionic colloidal silica sols on drainage and retention have been examined. Results showed that higher charge density of cationic guar gum and anionic colloidal silica sol gave better retention and drainage. Particularly highly structured silica gave greater retention efficiency.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.302-304
• /
• 1997

Chemical structure and electrical properties such as water treeing and space charge accumulation of various raw materials(XLPE) used for power cable insulation were investigated. It was found that chemical structure was changed after crosslinking reaction and every materials have different amounts of DCP and antioxidant. Electrical properties were also changed after extraction using $CHCl_3$ and xylene. Water tree length was smaller with additives such as DCP and antioxidant and bigger with low molecular weight components of polyethylene than that of extracted samples. Heterocharge was changed into homocharge after extraction. This shows that additives and low molecular weight components of polyethylene cause the heterocharge.

• 한국전기전자재료학회논문지
• /
• 제11권12호
• /
• pp.1060-1069
• /
• 1998

Electrical properties such as space charge accumulation and water tree length and physical properties such as tensile strength, elongation and degree of crosslinked polyethylene (XLPE)/ethylene n-butyl acrylate copolymer (EnBA) blends were investigated. It was found that electrical properties such as water tree length grown at a specific condition and AC breakdown strength are improved by blending the XLPE with EnBA. The EnBA having higher nBA content showed the better electrical properties in XLPE/EnBA blends. A further improvement of these properties was achieved when a small amount of crosslinking coagent was used in the preparation of XLPE/EnBA blends.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.666-669
• /
• 2008

Droplet in miniaturized microfluidic systems have received much focused attention recently. In this work, electrical charging phenomenon of a conducting water droplet on the electrode under the dc electric field is studied and using this phenomenon droplet actuation method for microreactor applications is experimentally demonstrated. To find effects of key factors, the effects of electric field, medium viscosity, and droplet size are investigated. A scaling law of charging for the conducting droplet is derived from the experimental results. Unlike the case of a perfect conductor, the estimated amount of electrical charge ($Q_{est}$) of a water droplet is proportional to the 1.59 power of the droplet radius (R) and the 1.33 power of the electric field strength (E). (For a spherical perfect conductor, Q is proportional to R2 and E.) It is thought that the differences are mainly due to incomplete charging of a water droplet resulted from the combined effect of electrochemical reaction at electrode and the relatively low conductivity of water. Using this phenomenon, we demonstrate the transport of the charged droplet and fusion of two oppositely-charged droplets. When electric field is subjected sequentially on the electrode, the charged droplet is transported on the electrode. For the visualization of fusion of charged droplets, the precipitation reaction is used. When subjected to a DC voltage, two droplets charged are moving and merging toward each other due to the Coulombic force and chemical reaction is simultaneously occurred by coalescence of droplets. It may be due to the interchange effect of charge. It is shown that the droplet can be used for microreactor where transporting, merging etc. of reagents constitute unit operation.

• Journal of Mechanical Science and Technology
• /
• 제17권3호
• /
• pp.422-428
• /
• 2003

This study concerns the performance of the heat transfer of the thermosyphons having 60, 70, 80. 90 axial internal low-fins in which boiling and condensation occurr. Water, HCFC-141b and CFC-11 have been used as the working fluids. The operating temperature, the liquid charge ratio and the inclination angle of thermosyphons have been used as the experimental parameters. The heat flux and heat transfer coefficient at the condenser are estimated from experimental results. The experimental results have been assessed and compared with existing theories. As a result of the experimental investigation, it was found that the maximum heat flow rate in the thermosyphons is dependent upon the liquid charge ratio and inclination angle. A relatively high rate of heat transfer has been achieved by the thermosyphon with axial internal low-fins. The inclination of a thermosyphon has a notable influence on the condensation. In addition, the overall heat transfer coefficients and the characteristics at the operating temperature are obtained for the practical applications.

• 화약ㆍ발파
• /
• 제34권4호
• /
• pp.1-9
• /
• 2016

수중 강재 절단을 위해 내압성, 유연성의 외부장치인 스프링 호스와 가소성 성형폭약을 결합한 수중 성형폭약 장치를 고안하였다. 최적조건 설계를 위한 기초실험으로 외부장치의 형상에 따른 관입성능을 비교하였다. 실험결과를 평가하기 위하여 관입 된 강재에 액상 고무를 이용하여 모형을 획득한 후 이미지 분석을 하였고, 성형폭약의 관입 과정을 모사하기 위해 AUTODYN 프로그램을 이용하여 해석하였다. 분석결과 원형 및 사각 외부장치의 평균 관입 깊이는 유사하였으나 관입품질은 원형의 경우 더 균일하였다. 또한, 사각의 경우 침투현상이 발생하였고, 수압증가에 따른 변위가 원형대비 크게 측정되었다.

• 설비공학논문집
• /
• 제20권4호
• /
• pp.230-237
• /
• 2008

The objective of this paper is to investigate the performance characteristics of a $CO_2$ cooling and water heating system using a twin-rotary compressor with the compression volume ratio of 0.6. The cooling performances of the $CO_2$ heat pump were measured and analyzed with the variations of charge amount, EEV opening, and compressor frequency. In addition, the performance of the combined system including cooling and water heating was also measured and analyzed by varying inlet temperature of the EEV. As a result, the optimal normalized charge and cooling COP in the cooling mode were 0.307 and 2.06, respectively. The application of the water heating into the $CO_2$ heat pump improved the cooling performance over 78% and decreased the EEV inlet temperature by $8^{\circ}C$, which can increase system reliability.

• 설비공학논문집
• /
• 제14권1호
• /
• pp.31-37
• /
• 2002

This paper is concerned with the development of a new method for making and separating ice and saving floated ice by installing an evaporation plate at in-water within a storage tank. In a conventional harvest-type ice storage system, a tank saves ice by separating a formed ice from an installed evaporation plate, which is located above an ice storage tank as an ice storage system. A new harvest-type method shows very good heat transfer efficiency than a convectional method. It is because the evaporation panel is directly contacted with water in a storage tank. Also, at a conventional system a circulating pump, a circulating water distributor and a piping are installed, but these components are not necessary in a new method. In this study two kinds of ice storage systems are experimentally investigated to study the thermal characteristics of ice storage tanks. The results showed discharge of cold capacity of new type indicated the high values about 30~40% based on five time of drive, the temperature difference of inlet/outlet occurred the big range about $1.3^{\circ}C$. So, the new type which makes ice in water showed superiorly.

• 상하수도학회지
• /
• 제19권3호
• /
• pp.370-377
• /
• 2005

Dispersion of coagulant should be completed in a fraction of a second before the metal hydroxide precipitate has form. For the reason so-called pump diffusion flash mixing (PDFM) have been proposed, and PDFM is one of reasonable methods to quickly disperse the hydrolyzing metal salts. In this study, therefore, we attempt to understand the difference of removal characteristics of natural organic matter (NOM) between pump diffusion flash mixing (PDFM) and conventional rapid mixing (CRM) for coagulation in a water treatment system, and to enhance the removal of NOM through the improved mixing process. DOC and turbidity removal by PDFM higher than those by CRM, while SUVA value of water treated by PDFM was high as compared with that by CRM. Hydrophilic NOM was more effectively removed by PDFM than CRM, since charge neutralization effect increased by quick dispersion of coagulant. The DBP formation potentials due to NOM was effectively reduced by the improved mixing (i.e., PDFM) for coagulation and could be controlled through decrease in concentration of precursor rather than reduction of activity with disinfectant.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 1999년도 Pre-symposium of the 10th ISWPC Recent Advances in Paper Science and Technology
• /
• pp.254-258
• /
• 1999

The distribution of anionic groups in the fibers, the fines, the colloidal fraction and the dissolved fraction, respectively, of thermomechanical pulp (TMP) suspensions was determined and peroxide bleaching of spruce TMP were also studied. Spruce TMP was extracted with hexane, treated with alkali, or bleached with peroxide. Suspensions made at pH 5.5 were fractionated into long fibres, large fines, small fines, a colloidal fraction and a dissolved fraction. The charge of the fractions was determined using polyelectrolyte titration. To determined the origin of the charges, the contents of fatty acids, resin acids and acidic units in hemicelluloses in the different fractions were determined by has chromatography. Extraction of TMP with hexane prior to fractionation increased the measured charge of the fibres. The removal of the wood resin probably uncovered some carboxyl groups on the fibre surfaces, or improved th e penetration of polybrene into the pores of the fibres. The charge of the fines and the colloidal fraction was lower when the wood resin had been removed. Alkaline treatment of the TMP increased the charge of the fibres and fines, mainly because of demethylation of pectins. Alkaline treatment increased the charge also of the dissolved fraction, because of the release the charge also of the dissolved fraction, because of the release of pectic acids into the water phase. Alkaline peroxide bleaching further increased the charge of fibres and the dissolved fraction, most likely because of lignin oxidation. The charge of the colloidal fraction, consisting mainly of wood resin, was only slightly affected by alkaline treatment and peroxide bleaching. The anionic groups in TMP suspensions were mainly free uronic acids in the hemicelluloses. The contribution from the fatty and resin acids was substantial only for the colloidal fraction.