• 멤브레인
• /
• 제27권5호
• /
• pp.389-398
• /
• 2017

연료전지용 고분자 전해질막에 있어서 가장 중요한 특성인 수소이온 전달 능력은 내부에서 형성되는 수화채널의 분포 및 형상에 큰 영향을 받게 된다. 비과불화탄소계인 탄화수소계 전해질막의 경우, 과불화탄소계 전해질막인 나피온에 비하여 이러한 수화채널이 약하게 형성되는 것으로 알려져 있으며 따라서 상대적으로 낮은 이온전달 성능을 나타내는 것으로 보고되고 있다. 본 연구에서는 컴퓨터를 이용한 전산모사 기술의 하나인 메조스케일 전산모사 기술을 이용하여 탄화수소계 연료전지용 전해질막인 술폰화 폴리이미드의 가습조건에서의 수화채널 형성 및 상분리 현상을 관찰하였다. 이를 통하여 술폰화 폴리이미드 내부에서 물분자 비드는 친수성 영역 전체에 걸쳐서 고르게 분포되며 명확한 수화 클러스터는 높은 술폰화도에서만 형성되는 것이 관찰되었다. 또한, 술폰화 폴리이미드 모델은 저가습 상태에서 수화 채널을 형성하는데에 나피온 모델에 비하여 더 어렵다는 것이 관찰되었다. 이러한 결과들은 비과불화불소계인 탄화수소계 전해질막의 수화채널 형성에 대한 기존 이론을 명확하게 뒷받침하고 있으며, 술폰화 폴리이미드의 전도도 경향도 잘 설명을 하고 있다. 따라서 메조스케일 전산 모사 기술은 연료전지용 전해질막의 상분리 현상 및 수화채널을 분석하고 이온전도 특성을 규명하는 데에 있어서 매우 효과적인 기술이 될 수 있다는 것을 확인하였다.

• Journal of Mechanical Science and Technology
• /
• 제17권3호
• /
• pp.429-439
• /
• 2003

Counter-current two-phase flows of air- water in narrow rectangular channels with offset strip fins have been experimentally investigated in a 760 mm long and 100 mm wide test section with 3.0 and 5.0 mm gap widths. The two-phase flow regime, channel-average void fractions and two-phase pressure gradients were studied. Flow regime transition occurred at lower superficial velocities of air than in the channels without fins. In the bubbly and slug flow regimes, elongated bubbles rose along the subchannel formed by fins without lateral movement. The critical void fraction for the bubbly-to-slug transition was about 0.14 for the 3 mm gap channel and 0.2 for the 5 mm gap channel. respectively. Channel-average void fractions in the channels with fins were almost the same as those in the channels without fins. Void fractions increased as the gap width increased, especially at high superficial velocity of air. The presence of fins enhanced the two-phase distribution parameter significantly in the slug flow, where the effect of gap width was almost negligible. Superficial velocity of air dominated the two-phase pressure gradients. Liquid superficial velocity and channel gap width has only a minor effect on the pressure gradients.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.1894-1899
• /
• 2007

This paper presents the thermal characteristics for micro heat exchanger with different micro-channel shapes. The shapes of micro-channel has been manufactured sheet metal by chemical etching for the I shape of straight channel and V and W shapes of chevron feature and fabricated micro plated heat exchangers using the vacuum brazing of bonding technology. The experimental study has been performed on heat transfer and pressure drop characteristics with various Reynolds number for water to water at the counter flows. The average heat transfer rate of V and W shapes has been showed about 1.5${\sim}$1.6 times large than those of I shape. For the comparison of Nusselt number, it is known that the convective heat transfer of V and W shapes represent more effect than I shape. The pressure drops of V and W shapes are about 1.2${\sim}$1.7 times lager than those of I shape.

• 한국수정란이식학회지
• /
• 제30권4호
• /
• pp.277-282
• /
• 2015

Cryopreservation affects osmotic tolerance and intracellular ion concentration through changes in expression levels of water and ion channels. Control of these changes is important for cell survival after cryopreservation. Relatively little is known about changes in $K^+$ channel expression compared to water channel expression. This study was performed to investigate changes in TASK-2 channel (KCNK5: potassium channel, subfamily K, member 5), a member of two-pore domain $K^+$ channel family, in cryopreserved mouse ovaries. Cryopreservation increased TASK-2 mRNA expression in mouse ovaries. In addition, TASK-2 protein expression was upregulated in vitrified and slowly frozen ovaries. TASK-2 protein was expressed in all area of granulosa cells that surround the oocyte within the follicle, except nucleus. Viability of cells overexpressed with TASK-2 was higher than that of vector-transfected cells. Our results found that TASK-2 expression was increased by cryopreservation and overexpression of TASK-2 decreased cryopreservation-induced cell death. These results suggest that TASK-2 upregulation might reduce cryodamage.

• Nuclear Engineering and Technology
• /
• 제40권2호
• /
• pp.139-146
• /
• 2008

This paper presents two of the fuel channel designs being considered for the CANDU-SCWR, a pressure-tube type supercritical water cooled reactor. The first is an insulated pressure tube design. The pressure tube is thermally insulated from the hot coolant by a porous ceramic insulator. Each pressure tube is in direct contact with the moderator, which operates at an average temperature of about $80^{\circ}C$. The low temperature allows zirconium alloys to be used. A perforated metal liner protects the insulator from being damaged by the fuel bundles and erosion by the coolant. The coolant pressure is transmitted through the perforated metal liner and insulator and applied directly to the pressure tube. The second is a re-entrant design. The fuel channel consists of two concentric tubes, and a calandria tube that separates them from the moderator. The coolant enters between the annulus of the two concentric fuel channel tubes, then exits the fuel channel through the inner tube, where the fuel bundles reside. The outer tube bears the coolant pressure and its temperature will be the same as the coolant inlet temperature, ${\sim}350^{\circ}C$. Advantages and disadvantages of these designs and the material requirements are discussed.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2022년도 학술발표회
• /
• pp.86-86
• /
• 2022

While estuarine dams can develop freshwater resources and block the salt intrusion, they can result in increased sediment deposition in the estuary. The mechanism of increased sediment deposition in an estuary with an estuary dam is not well understood. To fill this knowledge gap, 7 ADCP measurements of flow and suspended sediment concentration (SSC) were collected along-channel in an estuary with an estuarine dam over a neap-spring cycle. Flow and SSC were used to calculate the sediment flux and sediment flux gradients. The results indicated that the cumulative sediment fluxes at all stations were directed landward. The along-channel sediment flux gradient was negative, which indicated deposition along the channel. The landward mean-flow fluxes were dominant in the deep portion of the channel near the estuary mouth, whereas landward correlation fluxes were dominant in the shallow portion of the channel near the estuarine dam. The tides were the dominant forcing driving the sediment fluxes throughout the estuary.

• 상하수도학회지
• /
• 제12권2호
• /
• pp.127-139
• /
• 1998

The objectives of this study is at the development of the channel routing model which can be used for flood prediction. Among the routing models, the hydraulic technique of the implicit scheme in the dynamic equation is selected to route the unsteady varied flow in the open channel. The channel routing model is catchment runoff which computed by the conceptual and transfer function model. The conceptual and transfer function model can simulate the catchment runoff accurately. As a result of investigating the channel routing model, the optimal weighting factor ${\theta}$ which fixes two points between time line is chosen, and also, the optimal error tolerance which satisfies computing time and converge of solution is determined in this study.

• 한국농공학회논문집
• /
• 제47권7호
• /
• pp.49-56
• /
• 2005

Contamination in the drainage channels and creeks with pesticides used in agriculture is of a major concern in many countries. In this study the stream pesticide model RIVWQ (chemical transport model for riverine environments) was assessed for its applicability in simulating pesticide fate in drainage channels. The model was successfully calibrated against field data collected on flows and pesticide concentrations for a drainage channel from a small catchment in the Murrumbidgee Irrigation Area of southwestern New South Wales. The effects of different pesticide loading scenarios from farm fields on channel water quality were analysed by the calibrated model. The model simulated the flow rates and the pesticide concentrations in the drainage channel well. The results of the model simulation suggest that the RIVWQ model can be effectively used for predicting pesticide fate in the drainage channels and exposure assessment of pesticide in the agricultural environment.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2008년도 학술발표회 논문집
• /
• pp.1111-1115
• /
• 2008

The relative magnitudes of the individual terms of the momentum equation are analyzed and compared by the analytical methods in open channel flow. The temporal variations of each term(local acceleration term, convective acceleration term, pressure force term, gravity force term, and friction force term) are analyzed for the influence factors to runoff expressed by the parameters of the momentum equation, stream slopes and roughness coefficients. The magnitudes of each term vary with the channel characteristics, especially when the roughness coefficients are dominant or for the mild stream slopes the pressure term can not be negligible. As a result of the characteristics of momentum equation in open channel flow, the acceleration terms are very small compared with the other terms. The magnitudes of local acceleration and convective acceleration offsets each other. The peak time of each term except the gravity term coincides with inflection point of the hydrograph rising limb each other.

• 한국수자원학회논문집
• /
• 제30권1호
• /
• pp.15-22
• /
• 1997

하천형성의 중요한 요인이 되는 사행하천의 흐름은 막곡호안에 많은 영향을 준다. 특정한 하천에 대해 하도개량을 적용시키기 위한 일반적인 기준을 기술하기는 어려우나 토목 설계자에게 어떤 원칙과 지침을 제공하는 것은 대단히 중요하다. 본 고정상 실험연구의 목적은 평균유속과 유로만곡부에서의 곡률변경으로 최대 유속의 크기를 구하여 매번의 수리모형실험을 실시하지 않고도 중소하천의 개수에 이용할 수 있는 자료를 제공함에 있다.