• 제목/요약/키워드: Water analysis

검색결과 21,931건 처리시간 0.073초

불화수소(弗化水素)가스에 의(依)한 수도(水稻) 및 잡초(雜草)의 피해(被害) 조사연구(調査硏究) (Studies on the Effects of Hydrogen Fluoride Gas in Paddy Rice and Weeds at Fluorine Damaged Site)

  • 김복영;조재규
    • 한국환경농학회지
    • /
    • 제2권2호
    • /
    • pp.98-102
    • /
    • 1983
  • 양평(楊坪) 산간계곡(山間溪谷)의 수도(水稻) 및 산야초(山野草)의 피해(被害)는 현지(現地)의 피해상황(被害狀況), 피해증상(被害症狀)과 식물체중(植物體中)의 불소함량(弗素含量) 및 무기성분량(無機成分量)의 변화(變化)를 조사(調査)한 결과(結果)는 다음과 같다. 1) 수도(水稻)의 엽피해정도(葉被害程度)는 100m 지점(地點)까지는 95%, 500m 지점(地點)에서는 65%, 2㎞ 지점(地點)에서는 5%정도(程度)였다. 2) 피해증상특미(被害症狀特微) ${\cdot}$ 수도(水滔) : 심(甚)한 것은 백색(白色)으로 고사(枯死)하고 경미(輕微)한 것은 엽선단부위(葉先端部位)에 백색(白色)이나 적갈색(赤褐色)이 발견(發見) ${\cdot}$ 잡초(雜草) : 심(甚)한 것은 적갈색(赤褐色)으로 고사(枯死)하고 경미(輕微)한 것은 엽선단(葉先端)이 적갈색(赤褐色)으로 고사(枯死) 3) 식물체중(植物體中) 불소함량(弗素含量) ${\cdot}$ 수도(水稻) : 엽중(葉中) 불소함량(弗素含量)은 $170{\sim}3,225ppm$이고 근(根)에서는 $68.8{\sim}3,000ppm$이었으나 엽선단(葉先端)의 피해부위(被害部位)가 엽중심부(葉中心部) 보다 불소함량(弗素含量)이 $3{\sim}20$배(倍)많았다. ${\cdot}$ 잡초(雜草) : 무피해엽중(無被害葉中) 불소함량(弗素含量)은 $10{\sim}15ppm$이고 피해엽(被害葉)은 $130{\sim}242.5ppm$이였고, 엽선단(葉先端)의 피해부위(被害部位)는 중심부보다 $1.2{\sim}7$배정도(倍程度) 많았다. 4) 피해엽(被害葉)의 선단부위(先端部位)에 CaO, $K_2O,\;SiO_2$ Fe, 및 Mn 등(等)이 축적(蓄積)되었다. 5) 피해(被害)가 가장 적은 식물(植物)은 댕댕이덩굴이며 피해(被害)가 심(甚)한 식물(植物)은 산딸기, 두릅나무 등(等)이었다. 이상(以上)의 조사결과(調査結果) 본(本) 피해(被害)는 피해지(被害地) 린근(隣近)에서 불화수소산(弗化水素酸)을 리용(利用)한 세멘트 경화제(硬化劑) 제조시(製造時) 발생(發生)한 불화수소(弗化水素)가스에 의(依)한 피해(被害)로 판단(判斷)되었다.

  • PDF

용존유기탄소의 δ13C : 분석시 고형화 전처리 방법 비교 알칼린 과황산칼륨산화 탄산침전과 동결건조 (Comparison of Solidification Pre-treatment Methods for the Determination of δ13C of Dissolved Organic Carbon: Alkaline Persulfate Oxidation-Carbonate Precipitation vs. Freeze Drying)

  • 전병준;박현진;최우정;박용세;이상모;윤광식
    • 한국환경농학회지
    • /
    • 제36권2호
    • /
    • pp.113-118
    • /
    • 2017
  • DOC의 ${\delta}^{13}C$은 수질 오염원 규명에 활용할 수 있는 매우 유용한 지표이다. 본 연구에서는 안정성동위원소비 질량분석기(EA-SIRMS)를 이용하여 DOC의 ${\delta}^{13}C$을 분석할 때 사용하는 두 가지 전처리방법 (과황산칼륨산화-$SrCO_3$침전법과 동결건조법)의 정확도를 비교 평가하였다. 표준물질로는 글루코스(${\delta}^{13}C$; $-12.0{\pm}0.02$‰)와 돈분퇴비 침출액 건조분말(${\delta}^{13}C$; $-23.3{\pm}0.04$‰)을 사용하였다. 과황산칼륨산화-$SrCO_3$ 침전법에서는 용액의 알칼리성에 의해 DIC 제거가 어렵고 공기 중 $CO_2$의 영향에 의해 시료가 오염되어 분석결과의 정확도가 매우 낮았다. 반면, 동결건조법은 산 첨가에 의해 제거가 가능하였고, 측정값과 이론값의 상관관계가 매우 높아 실험조건별로 표준물질을 이용하여 측정값을 이론값에 근접하게 보정할 수 있는 것으로 나타났다. 따라서, EA-SIRMS를 이용하여 DOC의 ${\delta}^{13}C$ 분석시 동결건조법으로 시료를 전처리하면 분석결과의 정확도를 증대시킬 수 있을 것으로 판단된다.

어도를 통과하는 어류의 형태 체형비 평가 (Assessment of fish fineness ratios passing through a fishway)

  • 문운기;배대열;김도현;신현범;서정빈;임경훈;이의행;유재상;안광국;김재구
    • 환경생물
    • /
    • 제37권4호
    • /
    • pp.726-734
    • /
    • 2019
  • 본 연구에서 국내 어류 분류군별 체형비(Fineness Ratios; FR)를 분석한 결과 일부 잉어과와 납자루아과, 꺽지과, 검정우럭과 등의 어류 체형비가 상대적으로 낮았고, 그 외 분류군별 어류의 체형비는 4.5 이상으로 대부분 유영력이 뛰어난 것으로 나타났다. 유영성 어류를 대상으로 체장-체고비에 따른 서식지 선호를 분석한 결과 크게 3가지 어종타입은 구분되었다. 유영력이 낮은 납자루-붕어형은 체형비는 2.1~3.3 범위이며, 유선형의 비율을 가지는 피라미-참갈겨니형은 체형비가 3.7~5.2 범위였다. 은어-누치형은 체장이 체고의 5배 이상으로 유영력이 뛰어난 형태를 가지고 있었다. 어류 체형비에 따른 서식지 유형을 구분하면 붕어-납자루형은 흐름이 완만한 소(Pool habitat)형태의 서식지를 선호하는 어종 우세하였고, 반면 피라미-참갈겨니형, 은어-누치형의 경우 유속이 빠른 여울형서식지(Riffle habitat)를 선호하는 어종들로 구성되었다. 조사기간 동안 어도를 이용한 어류의 상대풍부도를 분석한 결과, 대부분의 어종들이 피라미-참갈겨니, 은어-누치형에 속하는 유영성이 높은 어류들로 확인되었다. 어도 내 유속이 0.5~1.0 m s-1 범위에서 이용 어종의 FRs는 4.5~5.0 범위로 나타나 대부분 유영성 어종들이 어도를 주로 이용하는 것으로 나타났다.

Detection of Campylobacter jejuni in food and poultry visors using immunomagnetic separation and microtitre hybridization

  • Simard, Ronald-E.
    • 한국어업기술학회:학술대회논문집
    • /
    • 한국어업기술학회 2000년도 춘계수산관련학회 공동학술대회발표요지집
    • /
    • pp.71-73
    • /
    • 2000
  • Campylobacter jejuni is most frequently identified cause of cause of acute diarrhoeal infections in developeed countries, exceeding rates of illness caused by both salmonella and shigilla(Skirrow, 1990 ; Lior 1994). Previous studies on campylobacter jejuni contamination of commercial broiler carcasses in u.s.(Stern, 1992). Most cases of the disease result from indirect transmission of Campylobactor from animals via milk, water and meat. In addition to Campylobactor jejuni. the closely relates species Campylobactor coli and Campylobactor lari have also been implicated as agents of gastroenteritis in humans. Campylobactor coli represented only approximately 3% of the Campylobactor isolates from patients with Campylobactor enteritis(Griffiths and Park, 1990) whereas Campylobactor coli is mainly isolated from pork(Lmmerding et al., 1988). Campylobactor jejuni has also been isolated from cases of bacteremia, appendicitis and, recently, has been associated with Guillai-Barre syndrome(Allos and Blaser, 1994; von Wulffen et al., 1994; Phillips, 1995). Studies in volunteers indicated that the infectious dose for Campylobactor jejuni is low(about 500 organisms)(Robinson, 1981). The methods traditionally used to detect Campylobactor ssp. in food require at least two days of incubation in an enrichment broth followed by plating and two days of incubation on complex culture media containing many antibiotics(Goossens and Butzler, 1992). Finnaly, several biochemical tests must be done to confirm the indentification at the species level. Therfore, sensitive and specific methods for the detection of small numbers of Campylobactor cells in food are needed. Polymerase chain reaction(PCR) assays targeting specific DNA sequences have been developed for the detection of Campylobactor(Giesendorf and Quint, 1995; Hemandex et al., 1995; Winter and Slavidk, 1995). In most cases, a short enrichment step is needed to enhance the sensitivity of the assay prior to detection by PCR as the number of bacteria in the food products is low in comparison with those found in dinical samples, and because the complex composition of food matrices can hinder the PCR and lower its sensitivity. However, these PCR systems are technically demanding to carry out and cumbersome when processing a large number of samples simutaneously. In this paper, an immunomagnetic method to concentrate Campylobactor cells present in food or clinical samples after an enrichment step is described. To detect specifically the thermophilic Campylobactor. a monoclonal antibody was adsorbed on the surface of the magnetic beads which react against a major porin of 45kDa present on the surface of the cells(Huyer et al., 1986). After this partial purification and concentration step, detection of bound cells was achieved using a simple, inexpensive microtitre plate-based hybridization system. We examined two alternative detection systems, one specific for thermophilic Campylobactor based on the detection of 23S rRNA using an immobilized DNA probe. The second system is less specific but more sensitive because of the high copy number of the rRNA present in bacterial cell($10^3-10^4$). By using specific immunomagnetic beads against thermophilic Campylobactor, it was possible to concentrate these cells from a heterogeneous media and obtain highly specific hybridization reactions with good sensitivity. There are several advantages in using microtitre plates instead of filter membranes or other matrices for hybridization techniques. Microtitre plates are much easier to handle than filter membranes during the adsorption, washing, hybridization and detection steps, and their use faciilitates the simultanuous analysis of multiple sample. Here we report on the use of a very simple detection procedure based on a monoclonal anti-RNA-DNA hybrid antibody(Fliss et al., 1999) for detection of the RNA-DNA hybrids formed in the wells.

  • PDF

Polyamide 조리기구로부터 Ethylenediamine 및 Hexamethylenediamine의 이행에 관한 연구 (A Study on Migration of Ethylenediamine and Hexamethylenediamine from Polyamide Utensils)

  • 엄미옥;곽인신;윤예정;전대훈;최현철;김형일;성준현;박나영;김소희;이영자
    • 한국식품위생안전성학회지
    • /
    • 제25권1호
    • /
    • pp.36-42
    • /
    • 2010
  • 식품유사용매 중 EDA 및 HMDA 분석법을 확립하고, 국내유통 재질 조리기구 124건에 대하여 식품유사용매별 이행량을 조사하였다. EDA 및 HMDA를 ethyl chloroformate로 디우레탄 유도체화한 후 GC/FID로 정량 또는 GC/MS로 확인하였다. 확립된 분석방법은 EDA 및 HMDA 각각에 대하여 LOD $0.3\;{\mu}g/mL$$0.1\;{\mu}g/mL$이었으며, 상판계수($r^2$) 0.999이상의 직선성 및 식품유사용매별로 88% 이상의 회수율을 확인할 수 있었다. 확립된 정량분석방법을 적용하여 식품유사용매별 이행량을 조사한 결과, EDA는 식품유사용매로 물을 사용한 경우 2품목에서만 각각 $1.31\;{\mu}g/mL$$2.06\;{\mu}g/mL$ 수준으로 검출되었으며, 나머지는 모두 불검출이었다. HMDA는 식품유사용매로 20% 에탄올을 사용한 경우 3 품목에서 $0.27{\sim}0.93\;{\mu}g/mL$, n-헵탄을 사용한 경우 10 품목에서 $0.26{\sim}0.44\;{\mu}g/mL$으로 검출되었으며, 나머지는 모두 불검출이었다. 본 연구에서 확인된 이행량은 유럽연합의 EDA 및 HMDA 각각의 이행기준인 $12\;{\mu}g/mL$$2.4\;{\mu}g/mL$과 비교 시 매우 낮은 수준이었다.

수중 무선 전화기의 설계 - 수중무선전화기 설계를 위한 수중소음분석을 중심으로- (The Design of Wireless Underwater Telephone -Analysis of Underwater Background Noise for Wireless Underwater Telephone Design -)

  • 박문갑;윤갑동;김석제;윤종락
    • 수산해양기술연구
    • /
    • 제37권4호
    • /
    • pp.302-307
    • /
    • 2001
  • 본 연구는 잠수기 어업용 수중무선전화기를 설계하는데 있어 최적의 반송 주파수와 송신 신호의 음원 준위를 결정할 목적으로 우리 나라 잠수기 주 조업장의 하나인 거제와 통영 해역의 해양 배경소음과 조업중인 잠수기 어장의 수중 소음에 대하여 검토, 고찰한 결과를 요약하면 다음과 같다. 1. 거제와 통영의 잠수기 어장의 해양 배경 소음을 분석한 결과, 음압 준위는 25∼301kHz 부근에서 가장 낮아 52∼57dB이었고, 주변 통항 선박량과 산업시설이 많은 거제 해역이 통영 해역보다 약 5dB 더 높았다. 2. 거제와 통영의 잠수기 어선의 조업중의 수중소음을 비교하면, 최저 음압준위는 30kHz 부근에서 거제 어장에서는 67dB로서 통영의 62d묘보다 5dB 높은 음압 준위를 나타냈다. 이것은 거제 해역은 잠수기 어선의 규모도 통영 해역의 잠수기 어선보다 약간 크고, 분사기를 사용하여 작업하는데 비해 통영 해역은 잠수기 어선의 크기도 상대적으로 작고, 주 어획 대상물이 달라 분사기를 사용하지 않는 것이 그 원인으로 판단된다. 3. 거제 해역의 패류 채취용 분사기를 사용할 때의 수중 소음의 음압 준위는 102dB었다. 4. 거제 해역의 조업중에 대한 수중 배경 소음을 67dB라 가정할 때, 최대 500m까지 통화하기 위한 송신 신호의 음원 준위는 131dB 정도이다. 그러나, 통영 해역의 잠수기 조업은 분사기를 사용하지 않는 조업으로 이 경우 배경 소음은 약 62dB로서 송신 신호의 음원 준위는 126dB정도이다. 잠수기 조업중이 아닌 경우 즉, 스쿠버 다이버용 수중무선 전화기인 경우에는 배경 소음이 52∼57dB이므로 송신 신호의 음원 준위는 l16∼121dB이면 될 것으로 판단된다. 협동학습 모형이 수학 수업에 보다 발전적으로 널리 적용되기를 기대한다.cal results well visualized the streamlines, pressure fields, and speed vectors of a simple cambered and slot cambered otter board with slot size 0.02C. The slot cambered one with slot size 0.02C was shown that pressure field was distributed moderately on front and back side of otter board. And, the delay and decrease of separation were favorably achieved by flow through slot. 4. Computed result on the pattern of hydrodynamic field and the values of C/sub L/ and C/sub D/ by the commercial CFD code, FLUENT, show almost the same as those of the experimental result.erence was found in its fragrance. And, no difference was found in brightness and viscosity between samples. As a result of conducting the palatability test, no difference was showed in the appearance, but as for the overall palatability

  • PDF

아말감의 구강내 부식 및 인공 부식에 관한 연구 (A STUDY ON IN VIVO AND IN VITRO AMALGAM CORROSION)

  • 임병목;권혁춘;엄정문
    • Restorative Dentistry and Endodontics
    • /
    • 제22권1호
    • /
    • pp.1-33
    • /
    • 1997
  • The objective of this study was to analyze the in vitro and in vivo corrosion products of low and high copper amalgams. The four different types of amalgam alloy used in this study were Fine cut, Caulk spherical, Dispersalloy, and Tytin. After each amalgam alloy and Hg were triturated according to the directions of the manufacturer by means of the mechanical amalgamator(Amalgam mixer. Shinhung Co. Korea), the triturated mass was inserted into a cylindrical metal mold which was 12mm in diameter and 10mm in height. The mass was condensed by 150Kg/cm compressive force. The specimen was removed from the mold and aged at room temperature for about seven days. The standard surface preparation was routinely carried out by emery paper polishing under running water. In vitro amalgam specimens were potentiostatically polarized ten times in a normal saline solution at $37^{\circ}C$(potentiostat : HA-301. Hukuto Denko Corp. Japan). Each specimen was subjected to anodic polarization scan within the potential range -1700mV to+400mV(SCE). After corrosion tests, anodic polarization curves and corrosion potentials were obtained. The amount of component elements dissolved from amalgams into solution was measured three times by ICP AES(Inductive Coupled Plasma Atomic Emission Spectrometry: Plasma 40. Perkim Elmer Co. U.S.A.). The four different types of amalgam were filled in occlusal and buccal class I cavities of four human 3rd molars. After about five years the restorations were carefully removed after tooth extraction to preserve the structural details including the deteriorated margins. The occlusal surface, amalgam-tooth interface and the fractured surface of in vivo amalgam corrosion products were analyzed. In vivo and in vitro amalgam specimens were examined and analyzed metallographically by SEM(Scanning Electron Microscope: JSM 840. Jeol Co. Japan) and EDAX(Energy Dispersive Micro X-ray Analyser: JSM 840. Jeol Co. Japan). 1. The following results are obtained from in vitro corrosion tests. 1) Corrosion potentials of all amalgams became more noble after ten times passing through the in vitro corrosion test compared to first time. 2) After times through the test, released Cu concentration in saline solution was almost equal but highest in Fine cut. Ag and Hg ion concentration was highest in Caulk spherical and Sn was highest in Dispersalloy. 3) Analyses of surface corrosion products in vitro reveal the following results. a)The corroded surface of Caulk spherical has Na-Sn-Cl containing clusters of $5{\mu}m$ needle-like crystals and oval shapes of Sn-Cl phase, polyhedral Sn oxide phase. b)In Fine cut, there appeared to be a large Sn containing phase, surrounded by many Cu-Sn phases of $1{\mu}m$ granular shapes. c)Dispersalloy was covered by a thick reticular layer which contained Zn-Cl phase. d)In Tytin, a very thin, corroded layer had formed with irregularly growing Sn-Cl phases that looked like a stack of plates. 2. The following results are obtained by an analysis of in vivo amalgam corrosion products. 1) Occlusal surfaces of all amalgams were covered by thick amorphous layers containing Ca-P elements which were abraded by occlusal force. 2) In tooth-amalgam interface, Ca-P containing products were examined in all amalgams but were most clearly seen in low copper amalgams. 3) Sn oxide appeared as a polyhedral shape in internal space in Caulk spherical and Fine cut. 4) Apical pyramidal shaped Sn oxide and curved plate-like Sn-Cl phases resulted in Dispersalloy. 5) In Tytin, Sn oxide and Sn hydroxide were not seen but polyhedral Ag-Hg phase crystal appeared in internal space which assumed a ${\beta}_l$ phase.

  • PDF

복합 레진으로 수복된 세 가지 첨와형태 와동의 파절 저항성에 관한 연구 (FRACTURE RESISTANCE OF THE THREE TYPES OF UNDERMINED CAVITY FILLED WITH COMPOSITE RESIN)

  • 최훈수;신동훈
    • 대한치과보존학회:학술대회논문집
    • /
    • 대한치과보존학회 2008년도 Spring Scientific Meeting(the 129th) of Korean Academy if Conservative Dentistry
    • /
    • pp.177-183
    • /
    • 2008
  • 심미성 복합레진은 자연 치질을 보존시키며 나아가 잔존 치질의 강도를 강화시켜 준다. 복합레진 수복시 더 많은 치질을 남기기 위해 첨와 (undercut) 형태의 교합면 치질을 남긴 채 복합레진으로 수복하는 경우가 많으나, 어느 정도 강도가 복원되는지에 대해서는 잘 알려져 있지 않다. 이에 본 연구에서는 첨와 형태의 와동을 잔존치질의 두께 (법랑질 /법랑질과 상아질)에 따라 형성하고 복합레진으로 충전한 경우, 수복된 치아의 파절 저항성을 손상이 없는 자연치와 비교 평가하였다. 상악 대구치 40개의 교합면을 편평하게 삭제한 후 방사선 사진에서 치수각의 위치를 확인하였다. 대상 치아를 각 10개씩 4개군으로 분류하였으며, $1{\sim}3$군은 실험군으로 모두 협측에 깊이 7 mm, 근원심 폭경 5 mm의 첨와 형태 와동을 형성하였고, 와동저에서 치수각까지의 거리를 약 0.5 mm로 유지하였으며 교합면쪽의 치질 두께를 달리하였다. 1군은 법랑질과 소량의 상아질로 구성된 치질 두께를 1 mm, 2군은 법랑질과 상아질의 두께를 1.5 mm, 3군은 법랑질과 상아질의 두께를 2 mm가 되도록 하였고, 4군은 건전한 자연치를 와동형성 없이 대조군으로 사용하였다. 두께 측정은 방사선 사진을 스캔한 후 길이 확대 프로그램을 이용하였다. 각 와동을 37% 인산으로 산부식한 다음 단일병 접착제 Single $Bond^{TM}$ (3M/ESPE, USA)를 적용하였고 혼합형 복합레진 Filtek $Z-250^{TM}$ (3M/ESPE, USA)을 사용하여 적층 충전하였다. 치아를 실온에서 증류수에 24시간 동안 보관한 다음 Sof-Lex system (3M/ESPE, USA)을 사용하여 연마하였다. 이후 자가중합형 레진에 교합면을 기저부에 평행한 상태로 치근부를 매몰한 다음 Universal testing machine (Zwick Z010, Germany)에서 지름 3 mm의 staineless steel rod를 1 mm/min의 cross-head speed로 하중을 가하여 파절 강도를 측정하였다. 통계 분석은 95% 유의 수준의 One-way ANOVA와 Tukey test를 이용하였으며 다음과 같은 결과를 얻었다. 1. 와동 형성 후 복합레진을 수복한 군들은 대조군에 비해 약 75%의 파절 강도를 보였다. 2. 교합면쪽 잔존 치질의 두께에 따른 파절 저항은 유의한 차이를 보이지 않았다 (p > 0.05). 복합레진을 이용하여 첨와 형태의 와동을 수복한 후 파절 강도를 측정한 결과 건전 치아보다는 강도가 낮았지만, 상부의 잔존 치질이 대부분 법랑질로 이루어진 경우에도 복합 레진으로 수복하면 건전 치아 파절 강도의 75%까지 유지할 수 있다는 결론을 얻었다.

  • PDF

다중빔 음향 측심기를 이용한 독도 동도와 서도 남부 연안 해저지형 비교 분석 (Comparative Analysis of Bathymetry in the Dongdo and the Seodo, Dokdo using Multibeam Echosounder System)

  • 이명훈;김창환;박찬홍;노현수;김대철
    • 자원환경지질
    • /
    • 제50권6호
    • /
    • pp.477-486
    • /
    • 2017
  • 본 연구에서는 독도, 동도와 서도 연안에서 정밀 해저 지형과 해저면 영상 자료를 획득하여 해수면 아래에서 나타나는 해저 지형 및 해저면 환경 특성을 비교 분석하였다. 독도 섬 육지부와 바로 연장되는 동도와 서도 각 남부 연안 해역의 약 $250m{\times}250m$ 범위에서 정밀 수심 자료와 해저면 영상 자료를 획득하였다. 동도 남부 연안은 최대 수심 약 50 m 범위이며, 서도 남부 연안은 최대 수심 약 30 m 범위에 해당한다. 동도와 서도 연안은 섬 육지부에서부터 연장되는 모암이 해수면 아래로 그대로 이어져 해저면에서 큰 수중 암반 지대를 형성하고 있는데, 그 규모는 서도 남부 연안이 동도 연안에 비해 비교적 크게 나타난다. 동도와 서도 연안 모두 유사한 수중 암반 지대가 형성되어 있지만, 주변으로 형성된 해저면 환경은 동도와 서도 남부 연안에서 상이하게 나타나는 특징을 보이고 있다. 동도 남부 연안은 섬 육지부에서 기인한 크고 작은 암설들로 인해 형성된 테일러스(Talus) 형태의 해저면 환경이 수심 약 15 m 범위까지 형성된 특징을 보이며, 수중 암반 지대와 해저면의 경계면이 모호하게 형성되어 있다. 반면에 서도 남부 연안은 비교적 큰 규모의 수중 암반들과 고른 퇴적물이 분포하여 해저면과 접하고 있는 섬 육지부터 연장되는 암반들의 경계면이 확실하게 구분되는 특징을 보이고 있다. 이는 동도의 해안 절벽에 많이 노출되어 있는 응회암층이 풍화나 침식에 약하여, 서도 연안에 비해 섬 육지부로부터 운반된 쇄설성 퇴적물이 흘러내린 영향이 많은 것으로 판단되는데, 특히 동도는 서도에 비해 선착장이나 통행로 개설공사 등의 활동이 계속되어 섬 육지부의 지반 불안정과 단층, 절리, 균열이 높은 편으로 나타난 바 있다. 또한 과거 연구 결과들에서 동도와 서도에 나타나는 괴상 응회질 각력암층이 서로 다르게 형성되어 있음이 제시된 바 있는데, 이러한 요소가 동도와 서도 남부 연안 해저면에서 구별되어 나타나는 쇄설성 퇴적물 환경에 영향을 주었을 것으로 판단되며, 동도와 서도 남부 연안의 상이한 해저면 환경적 특성이 나타나는 것으로 생각된다.

수입사료에 의한 가축분뇨 물질순환 및 환경부하 분석 (The Analysis of Environmental Loads and Material Recycling of the Nutrients by the Livestock Wastewater Originating from Imported Feeds)

  • 윤영만;이상은;정덕영;조규용;김종덕;김창현
    • 한국초지조사료학회지
    • /
    • 제28권2호
    • /
    • pp.139-154
    • /
    • 2008
  • 본 연구는 수입사료가 우리나라 농업환경의 오염부하에 미치는 영향을 파악하고자 2005년을 기준년도로 하여 수입사료 품목별 수입량 및 비료성분량, 수입사료로 인한 가축 사양단계에서 비료성분 발생량을 추산하고, 농경지 작물별 재배면적과 양분요구도 분석을 통해 수입사료로 인한 농경지의 오염부하도를 분석하였다. 수입사료를 통해 국내로 도입되는 비료성분량은 질소 371천톤, 인산 140천톤, 가리 143천톤, 주요 수입품목인 곡류 및 식물성 유박류에서 유래하는 비료성분 국내도입량은 성분별로 질소 93%, 인산 89%,가리 84%를 차지하였으며, 양돈급여를 기준으로 한, 수입사료 유래 가축분뇨 중 비료성분 함량은 질소 148천톤, 인산 84천톤, 가리 86천톤으로 수입사료를 통한 국내 양분 도입량의 52%, 인산 52%, 가리 42%의 비중을 차지하였다. 가축으로부터 배설되는 비료성분 중 퇴 액비화를 통한 자원화량은 질소 81천톤, 인산 74천톤, 가리 76천톤 이었으며, 퇴 액비로 투여된 비료성분의 무기 화율을 고려한 성분별 작물유효량은 질소 44천톤, 인산 48천톤, 가리 69천톤이었다. 또한 작물에 흡수 이용되지 못하고 토양에 축적되거나 지하수 등으로 용탈되는 비료성분은 질소 37천톤, 인산 27천톤, 가리 7천톤으로 추산되었다. 총수입가축사료로 도입되는 비료성분량 질소 371천톤, 인산 140천톤, 가리 143천톤과 비교할 때, 총비료성분 도입량 대비 농경지에서 작물에 흡수되는 비료성분량은 질소 12%, 인산 34%, 가리 48% 이었으며, 농경지에 축적 유출되는 비료성분량은 질소 10%, 인산 34%, 가리 5%로 가축분뇨 처리과정에서 대기 및 수계로의 유출량 등을 고려할 때 우리나라 환경 전반에 대한 오염부하 영향을 줄 우려가 있는 것으로 나타났다.