• Journal of the Korean Applied Science and Technology
• /
• 제33권3호
• /
• pp.575-586
• /
• 2016

An experiment was carried out to determine the effect of cooling water treatment with ionized calcium on calcium content, extending the shelf-life and quality of fresh chicken meat in poultry slaughtering process. The subjects were divided into four groups: control (0% without ionized calcium) and treatment groups (0.5, 0.7, 0.9% ionized calcium). The results indicated that the cooling water treatment with ionized calcium exhibited the bacterial counts of $10^5CFU/cm^2$ in surface of chicken meat, and maintained the quality of fresh chicken meat with extending the shelf-life above seven days when compared with that of control group. The results found that the cooling water treatment with ionized calcium could produce the calcium enrichment of chicken meat as nine times higher in calcium content of chicken meat when compared with that of control group. pH, water holding capacity, TBARS (MDA mg/kg) in chicken meat via the cooling water treatment with ionized calcium showed 6.4, above 50, below 0.10, respectively, with preventing the oxidation of unsaturated fatty acids. Lightness ($L^*$) as a chicken meat color, shear force indicated above 60, below $1.70kg/0.5inch^2$, respectively.

• Journal of the Korean Wood Science and Technology
• /
• 제46권2호
• /
• pp.155-165
• /
• 2018

The objective of the research was to evaluate the effect of particle pre-treatment on physical, mechanical, and durability of jatropha fruit hulls (JFH) particleboard. The pre-treatments included were immersing in cold water, hot water, and acetic acid solution. After each treatment, the particles were dried up to 3% moisture content. Urea-formaldehyde (UF) resin was used to fabricate particleboards with board size, thickness and density target of 25 cm by 25 cm, 0.80 cm, and $0.70g/cm^3$, respectively. Board pressed at $130^{\circ}C$ for 10 minutes, and $25kg/cm^2$ pressure. The evaluation of particleboard followed the JIS A 5908-2003. Whilist their resistance to subterranean termite test (mass loss, mortality, antifeedant value and feeding rate) refers to the Indonesian standard (SNI 01.7207-2006). The physical and mechanical properties of particleboards showed that all pre-treatments decreased the pH of particles. Overall, all particle immersing treatments resulted of better physical and mechanical properties of particleboard than those of untreated ones. The acetic acid treatment resulted the best physical and mechanical properties of particleboard. Based on the mass loss of JFH particleboard, hot water and acetic acid treated particleboards were classified into weak resistance to subterranean attack. The other two treatments were classified into very weak resistance. Hot water treated particleboard provided the highest mortality and antifeedant as much as 87.40% and 34.20%, respectively. Based on antifeedant classification, hot water treated particleboards were classified into moderately strong resistance, while other treatments were categorized into weak resistance. The lowest feeding rate value ($45.30{\mu}g/termite/day$) was attained by hot water treatment.

• Journal of Environmental Health Sciences
• /
• 제27권2호
• /
• pp.17-21
• /
• 2001

The object of this study is to find out the characteristics of waste oyster shells and determine the proper dosage of powdered waster oyster shells as the conditioning agent for water treatment sludge dewatering process. The large amount of waste oyster shells which discharges from the oyster farming, occurs serious environmental hazards. However, oysters shell contain large amount(about 38% by weight) of alkaline minerals, such as calcium and magnesium and so on, this natural material is thought to have the petential ability as a good conditioning agent. The results of this study are as follows. The optimum condition for improvement of the water treatment sludge dewaterability is when 6 g of waste oyster shell powder added to 200$m\ell$ of water treatment sludge. At optimum condition, the solid contents can reach to 31.78% and the specific resistance of conditioned sludge is 0.16$\times$10$^{8}$ sec$^2$/g. However, exceeding the of powdered waste oyster shell is needed to get the effective result. Consequently, the waste oyster shell can be a recyclable material to improve the dewaterability of water treatment sludges.

• Journal of the Korean Society for Marine Environment & Energy
• /
• 제8권4호
• /
• pp.174-178
• /
• 2005

Destruction of marine ecology system induced by the bal last water discharged from ships is one of the most serious problem among the various ship associated environmental impacts. International Maritime Organization (IMO) has actively dealt with this problem for a long time and is going to start to activate very strong international treatment for preventing ocean from such serious environmental impact. Various technologies of ballast water treatment are now being developed all over the world. In this paper, recent trend of existing ballast water treatment technologies is investigated in detail. Furthermore, in order to apply electrolysis technology to ballast wale r treatment, its basic principle is reviewed theoretically and its feasibility is checked through some in-situ experiments. Quite good results are shown in the experiments enough to confirm its applicability in ballast water treatment.

• Membrane and Water Treatment
• /
• 제13권3호
• /
• pp.111-119
• /
• 2022

In this research, bentonite was intercalated with CMC and then two different percentages of glutaraldehyde (5 & 10%) were added as a crosslink agent to achieve non water-soluble composites. Then the composites were coated on clay-based microfiltration membranes which were synthesized in the previous work of the authors. The XRD technique was used to track the intercalation mechanism and FTIR was used to study the crosslink procedure. SEM was used to study the microstructure and morphology of the coated samples and then the ability of non-coated and coated samples for removal of Cr³⁺ ions was studied and compared. It was seen that the samples coated with the synthesized composite including 10% of glutaraldehyde showed the best results and removed 99.7% of Cr³⁺ ions from water polluted with 5 ppm of Cr³⁺ ions.

• Journal of Korean Society of Water and Wastewater
• /
• 제32권4호
• /
• pp.301-307
• /
• 2018

Membrane distillation (MD) is a thermally driven desalination process with a hydrophobic membrane. MD process has been known to have a lower fouling potential compared to other pressure-based membrane desalination process (NF, RO). However, membrane fouling also occurs in MD process. In this study, the membrane fouling was observed in MD process according to the pre-treatment processes. The filtration and precipitation processes were applied as the pre-treatment to prevent the membrane fouling. The pore sizes of roughing filters were 0.4, 5, 10, 30, and $60{\mu}m$. The concentration of the coagulant was 1.2 mg/L as $FeCl_3$. The membrane fouling on MD membrane was successfully removed with both pre-treatment processes.

• Journal of Korean Society on Water Environment
• /
• 제26권5호
• /
• pp.781-788
• /
• 2010

A pilot study was performed to examine the feasibility of multiple stage of constructed wetland (CW) for nutrient removal. The system is composed of six wetland cells connected with water-ways. The hydraulic of wetland cells is designed as free water surface flow. The treatment capacity was $25m^3d^{-1}$ at HRT of about one day for each cell. The magnitude of nutrient removal was related with the length of wetlands and plant density. Total N and P removal rates were 1353 and $246mg\;m^{-2}d^{-1}$ respectively. The pilot-scale reactor was model as continuous flow system containing contribution of CSTR and PFR typed-reactors. The $k-C^*$ model equation was applied to predict N and P reduction. The result indicated the equation was well guided to estimate reduction of $NO_3-N$ and $PO_4-P$.

• Journal of the Korean Society for Heat Treatment
• /
• 제20권2호
• /
• pp.94-97
• /
• 2007

• Clean Technology
• /
• 제19권2호
• /
• pp.140-147
• /
• 2013

In this study, chemical demulsification and electrical treatment methods were investigated for improving the efficiency of water separation from a water/bitumen emulsion. Two types of motor oils (GS Caltex, Deluxe Gold V 7.5 W/30 and, Hyundai gear oil 85 W/140) were used as model oils in basic experiments to investigate the effects of a demulsifier on water/oil emulsion separation. Chemical demulsifiers showing good water separation performance were then used in asphalt emulsion and bitumen emulsion separation trials. Maleic anhydride and e-caprolactam were shown to be good oil soluble demulsifiers and 2-ethylhexyl acrylate and acrylic acid were effective as water soluble demulsifiers. Based on the results obtained in basic experiments, these four demulsifiers were used in further asphalt emulsion experiments. The oil soluble demulsifiers showed higher water separation efficiencies than the water soluble demulsifiers. To investigate the water separation efficiency using a combined chemical and electrical treatment method, the water/bitumen emulsion was separated with the electrical oil treatment apparatus after a chemical demulsifier had been added to it.

• Membrane Journal
• /
• 제6권4호
• /
• pp.196-202
• /
• 1996

In this paper several advantage of RO/NF technologies have been described. However, it should be noted that membrane technology does not solve all the water treatment problems encountered in municipalities. Membranes can provide effective and highly optimized solutions when integrated with conventional technologies such as coagulation, sand filtration, and activated carbon treatments.