• 제목/요약/키워드: Water Supply Services

검색결과 98건 처리시간 0.028초

DEA 및 Malmquist 지수를 이용한 물자원사업 민간위탁경영기관에 관한 효율성 분석 (A Study on Efficiency of Local Water Supply Service Contracting by Data Envelopment Analysis and Malmquist Index)

  • 김희경;이창원
    • 경영과정보연구
    • /
    • 제36권3호
    • /
    • pp.89-111
    • /
    • 2017
  • 오늘날의 시대는 블랙골드(black gold)시대를 벗어나 이제 블루골드(blue gold)의 시대가 도래되었다고 할 수 있다. 물에 대한 중요성이 증가되는 가운데, 물 산업의 발전을 위한 지원 및 정책이 제시되고 있다. 물 산업은 공공서비스이지만, 불균형한 공급으로 인한 문제점들이 존재하며 이를 해결하기 위해서 공공서비스의 민영화라는 주제와 관련해 가장 민감하고 관심이 집중된 분야라고 할 수 있다. 우리나라도 이러한 물 산업의 민영화에 대한 주제가 언급되면서 현행 수도법에 근간한 민영화 운영방식 중 하나인 전문기관(한국수자원공사)에 의한 민간위탁이라는 방식으로 공공서비스의 효율성을 높이고자 사업을 진행 중에 있다. 따라서 본 연구에서는 지방상수도 민간위탁 운영을 실행 중인 18개 지역의 위탁사업소들을 대상으로, 2012년부터 2014년까지의 데이터를 바탕으로 하여 민간위탁운영에 대한 효율성 및 생산성 분석을 실시하고자 한다. 본 연구의 효율성 분석결과, 3개년 동안 18개의 위탁기관 중 10개 기관이 효율적인 기관으로 나타났으며 생산성 변화에 대한 분석을 실시한 결과, 1기(2012-2013년)에서 2기(2013-2014년)로 넘어가는 동안 생산성이 감소된 것을 확인할 수 있었다. 이러한 생산성에 영향을 미치는 원인은 누수율과 원수의 유효이용률로 선정하였고 누수율의 경우 생산성에 부(-)의 영향을 미치는 것으로 나타났고 원수의 유효이용률의 경우, 생산성에 정(+)의 영향을 미치는 것으로 나타났다. 따라서 본 연구는 현 수도사업의 문제점을 해결하기 위한 해결책에 대한 효율성과 생산성을 분석하였다는 점에서 기존의 수도사업과 관련된 연구들이 제시하지 못한 시사점을 지니고 있다고 할 수 있다.

  • PDF

비례제어식 자동온도조절기의 온도감지방식별 난방제어 특성 비교 (A Comparison of Heating Control Characteristics by Temperature Sensing Methods for Thermostatic Valves with the Proportional Control Mode)

  • 김용기;이태원;강성주
    • 대한설비공학회:학술대회논문집
    • /
    • 대한설비공학회 2007년도 동계학술발표대회 논문집
    • /
    • pp.161-166
    • /
    • 2007
  • Various thermostatic valves have been used widely in Korea for conservation of heating energy and enhancement of thermal comfort in residential buildings. But heating control performances of thermostatic valves extensively vary with the design and operational conditions of the heating system, climate condition and others. An experimental method was carried out in this study to analyze heating control characteristics by temperature sensing methods of thermostatic valves for various parameters, such as supply temperatures and flow rate of hot water, the position of room thermostats and outdoor air temperatures. As a result, the heat flow rate per day of S-Valve($34^{\circ}C$-Type) of water temperature sensing method was liked that of C-Valve of indoor air temperature sensing method with stage 3.3 of room thermostat in case supply temperature of hot water was $45^{\circ}C$, flow rate was 1.3 L/min and outdoor air temperature was $7.8^{\circ}C$.

  • PDF

열원 및 공조설비 통합 최적제어기법 구현에 관한 연구 (Real Time Near Optimal Control Application Strategy for Heat Source and HVAC System)

  • 송재엽;안병천;주영덕;김진
    • 대한설비공학회:학술대회논문집
    • /
    • 대한설비공학회 2008년도 하계학술발표대회 논문집
    • /
    • pp.60-65
    • /
    • 2008
  • The near-optimal control algorithm for central cooling and heating system has been developed for minimizing energy consumption while maintaining the comfort of indoor thermal environment in terms of the environmental variables such as time varying indoor load and outdoor temperatures. The optimal set-points of control parameters with near-optimal control are supply air and chilled or hot water temperatures. The near optimal control algorithm has been implemented by using LabVIEW program in order to analyze energy performance for central cooling and heating control system.

  • PDF

중앙냉방시스템의 실시간 준최적제어 적용에 따른 실험적 연구 (Real Time Near Optimal Control Application Strategy of Central Cooling System)

  • 안병천;송재엽;주영덕;김진
    • 설비공학논문집
    • /
    • 제20권7호
    • /
    • pp.470-477
    • /
    • 2008
  • The near-optimal control algorithm for central cooling system has been developed for minimizing energy consumption while maintaining the comfort of indoor thermal environment in terms of the environmental variables such as time varying indoor cooling load and outdoor temperatures. The optimal set-points of control parameters with near-optimal control are supply air and chilled water temperatures. The near optimal control algorithm has been implemented by using LabVIEW program in order to analyze energy performance for central cooling control system.

급수배관에서의 순간최대 급수량의 산정에 대한 비교 연구 (A Comparison of the Design Loads of a Water Supply System)

  • 이용화
    • 설비공학논문집
    • /
    • 제26권1호
    • /
    • pp.38-41
    • /
    • 2014
  • Fixture units and the diversity curve are used, in order to determine the required size of water supply pipe. However, the values of the National Plumbing Code, International Plumbing Code and National Standard Plumbing Code of America are not the same. The objective of this study is to comparatively analyze the fixture units and the peak flows of a 10th story office building, at any instant of time, according to the three codes.

GIS기반 InVEST모형을 이용한 네팔 Bagmati유역의 물생산량 산정 (Water yield estimation of the Bagmati basin of Nepal using GIS based InVEST model)

  • 쉬크샤 바스톨라;성연정;이상협;정영훈
    • 한국수자원학회논문집
    • /
    • 제52권9호
    • /
    • pp.637-645
    • /
    • 2019
  • 본 연구는 유역에서 제공하는 다양한 생태서비스 가운데 네팔의 Bagmati 유역의 물생산량(Water yield)을 산정하였다. 물 공급, 관개 수력 등 다양한 시설에 사용되는 물생산량 지도는 계획 및 관리에 도움이 되며 생태서비스의 공급과 생산에 의도하지 않은 부정적 영향을 줄일 수 있다. 여러 문헌들은 네팔 Bagmati유역에 대한 탄소저장과 식수공급과 같은 생태서비스 제공 연구에 중점을 두었으나 토양피복별 혹은 소유역별 물 생산량에 대한 연구는 매우 미흡했다. 따라서 본 연구에서는 네팔 바그 마티 유역에서 소유역 규모와 함께 유역의 총 물생산량을 계산하고 유역의 토지피복 유형별로 물생산량을 산정하기 위해 시작되었다. 이를 위해, 생태서비스 평가를 위해 가장 많이 사용되는 Budyko 수문학적 방법에 바탕을 둔 ArcGIS기반 InVEST Water Yield 모형이 사용되었다. 본 연구로부터의 결과는 단위면적(ha)e당 물 생산량이 소유역 5 ($15216.32m^3/ha$)에서 가장 높았으며 소유역 6 ($10847.15m^3/ha$)에서 가장 낮았다. 토지피복별 물생산량은 도시화지역에서 가장 높게 산정되었으며, 초원과 농경지가 도시화지역 다음으로 높게 산정되었다. 본 연구에서 산정된 소유역별, 토지피복별 물생산량은 지역 규모의 상호 관련 서비스 개발을 위한 효율적인 시나리오를 제공하고 지속 가능한 토지 이용 정책 및 상호 관련된 물 관리 서비스를 촉진시킬 것으로 기대한다.

未完工干拓地의 定住生活 實態分析 (III) - 部落의 生活環境 - (Analysis on the Settlement Conditions in the Troubled Reclaimed Areas Under State Control (III) - Living Conditions in Rural communities -)

  • 최수명;황한철
    • 한국농공학회지
    • /
    • 제33권3호
    • /
    • pp.73-80
    • /
    • 1991
  • In Korea, small-scale reclaimed areas have been suffering from many problems because of the lack of comprehensive developing strategy although considerable investments have been inputed by the public sector since 1970's. For 3 reclaimed sites in Chonnam Province chosen as case study areas, the analysis, the third attempt of widely-spanned studies on areal conditions, concentrated on their living conditions. Its results were as follows : 1. Although rural residents have increased their concern on health and medical services, the public sector can only serve basic and emergent level of them, and therefore, the private sector, which is mostly placed in urban areas and costed much higher than public one, has the dominant share of those services. So, because those costs are a great expense to rural residents, their supplying system should be planned with special reference to lightening the economic burden of them. 2. By the development of locally fitted programs and innovative systems, the rural education should be qualitatively improved to deal successfully with its small scale. That will result in increasing the schooling rate to schools in rural communities, lightening the economic burden of rural residents on education services and finally activating them to contribute the betterment of rural education. 3. Servicing level of water supply, sewerage and garbage disposal in the reclaimed areas has been remaining at the lower order even in other rural areas. In the design of rural water supply, average daily consumption per capita should be changed according to the composition rate of fishing households and variety of the source of water supply. 4. Most of rural residents in the reclaimed areas want to establish the welfare facilites for the infant, youth, aged and public bath However in the long-term basis, the cooperative production and processing facilities should be considered for modernized efficient farming.

  • PDF

산림생태계 수자원 공급서비스 계량화 모형의 국내적용성 분석 (Applicability Analysis of Water Provisioning Services Quantification Models of Forest Ecosystem)

  • 최현아;이우균;송철호;이종열;전성우;김준순
    • 한국환경복원기술학회지
    • /
    • 제17권4호
    • /
    • pp.1-15
    • /
    • 2014
  • Forest ecosystems generate variety of important goods and services for human well-being. As a growing concern of climate change and water shortage, it is necessary to quantify, model and map water balance in forest. In this study, we have analyzed 11 overseas forest water supply models (AIM, ATEAM, CENTURY, (E)SWAT, GUMBO, InVEST, PLM, SAVANNA, WaSSI, WaterGAP, WBM) and compared their scale, input and out data, availability of the models and analyzed the applicability of the models to Korea. As a result, InVEST and WaterGAP model appeared to be applicable for quantifying water provisioning services in Korea. A systematic approach for applying to evaluate water balance in forest was suggested based on our quantification approach.

수문학적 생태계 서비스를 고려한 북부베트남의 우선보전산림 설정 (Establishment of Priority Forest Areas Based on Hydrological Ecosystem Services in Northern Vietnam)

  • 공인혜;이동근
    • 한국환경복원기술학회지
    • /
    • 제17권5호
    • /
    • pp.29-41
    • /
    • 2014
  • 최근 생태계 서비스의 가치를 정량화하고, 경제적 보상을 통해 보전할 수 있도록 하는 생태계 서비스 직불제 (Payment for Ecosystem Services, PES)에 대한 연구가 활발히 진행되고 있다. PES를 정책에 반영시키는 것은 생태계 보전과 빈곤경감을 동시에 달성할 수 있는 방안으로 여겨지면서, 주로 개발도상국에서 적극적으로 도입하고 있다. 그 중, 베트남은 선구적으로 PES를 범국가적인 법 제정을 통해 시행하고 있으나, 공간적 정량화를 통한 광범위한 생태계 서비스 평가는 부족한 실정이다. 본 연구에서는 북부 베트남에서 수도 하노이를 흐르는 홍강(Red River)의 상류인 Da 강 유역을 중심으로 수문학적 생태계 서비스를 평가를 통해 우선보전산림을 설정하고자 하였다. 우선 평가를 위해 기본적인 최신의 토지피복지도를 구축하고자 Landsat영상을 통해 토지피복분류를 수행하였다. 그리고 이 지역의 수자원공급 및 토사 유실량 방지의 수문학적 생태계서비스를 평가하기 위해 물수지이론 및 USLE 공식을 도입하였으며, 이를 통해 도출된 서비스량을 산림지역에 한정하여 서비스공급 우위지역을 도출함으로써 우선보전 산림지역으로 설정하도록 제안하고자 하였다. 그 결과, 산림지역 내에서도 지형, 기후, 토지피복에 따라 생태계서비스공급량의 범위가 달라짐을 확인하였으며, 수문학적 생태계 서비스 공급우위지역은 푸롱산(Mt. Phu Luong), 판시판산(Mt.Fanxipan), 호앙리엔 국립공원(Hoang Lien National Park) 등으로 나타났다. 이 연구의 결과는 Da 강 유역에서 생태계 서비스 보전을 위한 우선 지역을 확인하는 것뿐만 아니라, 어느 지역의 토지소유주가 더 보상받아야 하는지를 판별하는데 이용함으로써 보상공유(Benefit Sharing) 달성에 기여할 수 있을 것이다.

공기실이 설치된 건축물 급수관로의 과도압력 특성 (Characteristics of the Transient Pressure in a Building Water Supply System with an Air Chamber)

  • 황희성;임기원;이광복;조병선;차동진
    • 설비공학논문집
    • /
    • 제12권8호
    • /
    • pp.782-790
    • /
    • 2000
  • A numerical study has been conducted to characterize the transient pressure in a building water supply system with an air chamber by utilizing a commercial code that employs the method of characteristics. Some results produced for the purpose of verification in the study agree quite well with the previously reported. Several parameters are then varied. Among them are the valve closure time, the wave speed, the static pressure, the polytropic exponent, the air chamber volume, the inner diameter and the shape of orifice in the air chamber, etc, while the water temperature and velocity are kept constant at $20^P{circ}C $,/TEX> and 0.8 m/s, respectively, Results reported in this parametric study may be useful to understand the unsteady behavior of the system.

  • PDF