• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.42 no.2
• /
• pp.82-87
• /
• 2010

The Hanji dyed with persimmon juice were useful goods in the past, but they are not widely used nowadays despite of their many strong points such as antibacterial and water-resistant properties. The object of this study is to provide useful data for developing new products by using them. We dyed traditional Korean hand-made papers (Hanji) with colorants extracted from fruits of Diospyros kaki and investigated the effect of various dyeing factors (mordant, mordanting method, pH of dyeing solution, light exposure time etc.) on optical and mechanical properties of the dyed Hanji. Changing mordant affected the color of dyed Hanji. The dyed Hanji after-mordanted with Cu mordant had the highest K/S value and showed the deepest yellow and red shade. The best mordanting method was an after-mordanting. The K/S value of dyed Hanji increased with decreasing pH of dyeing solution. The tensile index and size degree values of the Hanji were increased after dyeing.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.1250-1255
• /
• 2010

In this study, in order to examine the hydraulic characteristics for a crushed stone mat. it was accomplished discharge capacity test and soil-water characteristic curve(SWCC) with the object of the research. From the test result, it produced propriety mixed ratio of the crushed stone which mixes the sand. at the time of crushed stone 100% where it does not mixes the sand it appeared that permeability was biggest. increase of shock and content of the sand showed decrease of air entry value.

• Journal of Applied Tourism Food and Beverage Management and Research
• /
• v.13 no.2
• /
• pp.119-127
• /
• 2002

This study was made to find the compound of it's taste and properties of texture and also it's color desired and optimal conditions when the natural spices garlic, celery, parsley, bay leaves, pepper com, nutmeg, shallot, onion, tarragon, lemon juice-are added to reduction of the spices if the liquid egg yolk and hot virgin olive oil. Extracted by white wine and vinegar and then baked on salamander and gas oven in emulsified properties of sabayon and hot virgin olive oil. It may be indicated the pasteurization that during that in all treatment of the liquid egg yolk was achieved with whisk holding water in double boiling pen 95$^{\circ}C$ for 1min with the object of removing salmonella possibly contained in the yolk. (Imai camd namba e2)

• Journal of the Korea Fashion and Costume Design Association
• /
• v.3 no.2
• /
• pp.35-50
• /
• 2001

The object of this study is to improve the adsorption of dye for gromwell. Dye was from gromwell first soaked in methylol and added the distilled water, using same amount of methylol. The fabrics used for the experiments were cotton, silk and acrylics(KS0905). These were used untreated and pretreated with chitosan, premordanted with Cu, Al and Fe. Dyeing conditions were controlled. 1. Deep color effect was shown silk. 2. Chitosan treated cotton and acrylics showed deep color effect and huge color difference before and after the experiment. 3. In chitosan treated acrylics, deep color effect were shown. It proved the good adsorption of gromwel under metal mordanting. 4. Cu showed high adsorption of gromwell and deep color effect. 5. Chitosan treated acrylics can be substitute for wool.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1848-1852
• /
• 2003

Generally, burrs refer to projected parts remained on the edge after material had been processed. These burrs decrease the precision of part and cause many problems in part assembly. Burrs are undesirable projections of the material beyond the edge of the workpiece. A number of deburring processes have been developed such as barreling, brushing, chemical methods etc. But, there are a few publications in the area of applying ultrasonics to deburring. When ultrasonic vibration propagates in the liquid medium, a large number of bubbles are formed. These bubbles generate an extremely strong force, which removes burrs. Cavitations were used as a term to describe erosion of parts caused by the action of cavities in liquid. The object of this study is to analyze the effects of ultrasonic cavitation in deburring process. For this purpose, we introduce a new ultrasonic cavitation method with abrasive, which efficiently removes the burrs. Experimental parameters to verify the deburring effects of ultrasonic cavitations are ultrasonic power, amplitude, distant of the transducer from the workpiece, deburring time and abrasive. It has been shown that deburring with ultrasonic cavitation in water is effective to burrs.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.7
• /
• pp.562-569
• /
• 2016

This paper proposes a navigation system with a robust localization method for an underwater unmanned vehicle. For robust localization with IMU (Inertial Measurement Unit), a DVL (Doppler Velocity Log), and depth sensors, the EKF (Extended Kalman Filter) has been utilized to fuse multiple nonlinear data. Note that the GPS (Global Positioning System), which can obtain the absolute coordinates of the vehicle, cannot be used in the water. Additionally, the DVL has been used for measuring the relative velocity of the underwater vehicle. The DVL sensor measures the velocity of an object by using Doppler effects, which cause sound frequency changes from the relative velocity between a sound source and an observer. When the vehicle is moving, the motion trajectory to a target position can be recorded by the sensors attached to the vehicle. The performance of the proposed navigation system has been verified through real experiments in which an underwater unmanned vehicle reached a target position by using an IMU as a primary sensor and a DVL as the secondary sensor.

• Nuclear Engineering and Technology
• /
• v.33 no.5
• /
• pp.547-555
• /
• 2001

In pressurized light water reactor fuel assembly, spacer grids support nuclear fuel rods both laterally and vertically. The fuel rods are supported by spacer grid springs and grid dimples that are located in the grid cell. The support system allows for some thermal expansion and imbalance of the fuel rods. The imbalance is absorbed by elastic energy to prevent coolant flow- induced vibration damage. Design requirements are defined and a design process is established. The design process includes mathematical optimization as well as practical design method. The shape of the grid spring is designed to maintain its function during the lifetime of the fuel assembly. A structural optimization method is employed for the shape design. Since the optimization is carried out in the linear range of finite element analysis, the optimum solution is verified by nonlinear analysis. A good design is found and the final design is compared with the initial conceptual design. Commercial codes are utilized for structural analysis and optimization.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.spc1
• /
• pp.239-241
• /
• 2005

Alisma plantago seeds have some difficulties for mechanical sowing because of small, irregular and shrunken shapes. Thus it was intended to make seed pelleting for Alisma piantago seeds to solve these problem. The main object of this study was to find the best materials for Alisma plantago seeds pelleting. The most desirable shapes which provide a spherical and smooth surface of the pelleted seeds that enhance mechanical singling was made from the mixture of SDZ + DE + CA $0.4\%$. The pelleted seeds were easily broken after absorbing water and the germination rate of those was $95.3\%$ in lab.

• Journal of the Korean Society for Heat Treatment
• /
• v.13 no.5
• /
• pp.330-336
• /
• 2000

This study deals with the characteristic of refrigerant for heat-treatment deformation control of SM45C steel. The control of heat-treatment deformation must need the progress of production parts for a landing gear. Most of the deformation is occurred on unequal cooling. The unequal cooling is occurred by a property of quenching refrigeration. When a heated metal is deposited in the refrigeration, the cooling speed is so slow in early period of cooling because of occurring a steam-curtain. After more cooling, the steam-curtain is destroyed. In this progress, the cooling speed is very fast. The object of this study is to control the deformation of heat-treatment for landing gear by improving the conditions of quenching. The cooling curves and cooling rates of water, oil and polymer solution are obtained and illustrated. From the characteristics of the quenching refrigerant, the effects of heat-treatments on thermal deformation and fatigue strength are also investigated.

• Journal of Veterinary Clinics
• /
• v.32 no.1
• /
• pp.56-61
• /
• 2015

The object of this study was to find out the immunomodulatory effects of Ginger Aqueous extracts, as compared with that of ${\beta}$-glucan well-known an immune modulator, on the cyclophosphamide (CPA) induced immunosuppress mice. To induce immunosuppress, 150 and 110 mg/kg of CPA were dissolved in saline and injected intraperitoneally at 3 or 1 day before start of test article administration, respectively. ${\beta}$-glucan or gingers (125, 250, 500 mg/kg) were dosed, 4 times at 12-hr intervals starting 24hrs after last CPA-treatment. Distilled water was used as a vehicle and each groups were used 10 mice. As results of twice intraperitoneal CPA treatment, decreases in the body weight and gain, weight of thymus, spleen. However these CPA-induced immunosuppress changes were inhibited by treatment of three different dosages of ginger or ${\beta}$-glucan as compared with CPA control. Similar favorable inhibitory activities on weight and histopathological change of spleen and thymus induced CPA treatment were detected between ${\beta}$-glucan and ginger 250 mg/kg treated groups.