• KSBB Journal
• /
• 제17권4호
• /
• pp.357-364
• /
• 2002

편백나무와 화백나무의 잎으로부터 시료전처리, 물과 잎의 혼합비, 추출시간, 채취시기 등 정유 추출에 적합한 조건을 구명하고 잎으로부터 추출된 정유조성성분을 GC-MS로 분석하였다. 정유추출에 적합한 전처리법으로는 믹서기로 잎을 분쇄하는 방법이 좋았으며, 증류수와 잎의 혼합비율은 그다지 영향을 미치지는 않았으나 증류수 1 L당 100 g의 잎을 혼합하였을 때 추출효율이 가장 좋았다. 정유추출시간은 시간이 경과함에 따라 추출효율은 증가하였지만 탄화향이 심해 5시간이 적합한 것으로 나타났다. 계절에 따른 정유수율은 편백나무는 겨울이 4.5%, 화백나무는 가을에 채취한 시료가 5.3%의 높은 수율을 보였다. 편백나무정유와 화백나무정유 조성분은 차이를 보였으며, 주성분은 monoterpene류였다. 편백나무정유의 주성분은 limonene, terpinene-4-ol, ${\gamma}$-selinene 및 $\alpha$-cedrene였으며, 화백나무정유의 주성분은 $\alpha$-pinene, myrcene, limonene, bomyl acetate, $\beta$-caryophyllene, longifolene 및 $\beta$-cedrene이었다.

• 한국환경과학회지
• /
• 제21권10호
• /
• pp.1265-1274
• /
• 2012

This study was conducted to investigate the extraction characteristics including total polyphenol compound content (TPC) and the antioxidative effect of Rumex crispus root extract on commercial corn oil. Extraction yield was increased with extraction temperature but decreased with extraction ratio. No significant differences in aromatics content were found among the extracts prepared with various extraction conditions; extraction ratio, extraction temperature, extraction pH and composition of extractant. Total flavonoid content of the extract was increased with extraction temperature and extraction pH, and highest value of it was found when extractant composition of ethanol in water was 75%. Total polyphenol compound content (TPC) of the extract with 10 fold extraction ratio showed the highest value, but no significant difference in TPC was found with extraction temperature. Reducing power and DPPH (${\alpha}$,${\alpha}$-diphenyl-${\beta}$-picrylhydrazyl) radical scavenging ability (RSA) of the extract in spectrophotometric absorbance were decreased with extraction ratio but increased with extraction temperature and showed 63.1%~98.4% and 67.6%~86.7% of those of ascorbic acid in reducing power and DPPH RSA, respectively. The antioxidative effects of the extract on corn oil were 84.8~93.0% of that of commercial butylated hydroxytoluene, the antioxidant index value was highest when the ethanol composition to water in extractant was equal ratio.

• 환경기술인
• /
• 제25권통권260호
• /
• pp.24-27
• /
• 2008

• 한국식품과학회지
• /
• 제47권5호
• /
• pp.561-566
• /
• 2015

350 ppm 농도로 물/카놀라 기름 에멀션에 첨가된 달걀 노른자 위 레시틴은 에멀션 기름의 철 이온에 의한 자동산화와 클로로필에 의한 감광산화에 유의한 영향을 나타내지 않았다. 에멀션의 산화 중 달걀 노른자위 레시틴으로부터 유래한 인지방질은 분해되었으며 감광산화에 비해 자동산화에서 분해 속도가 높았다. 그러나 PC와 PE 사이의 분해 속도는 두 종류의 산화에서 모두 유의한 차이를 보이지 않았다(p>0.05).

• 한국물환경학회지
• /
• 제30권5호
• /
• pp.469-476
• /
• 2014

The focus of this study was to observe the growth of Chlorella sp., Nannochloris sp., and Botryococcus braunii under mixotrophic conditions (i.e., added glycerol) with the aim of increasing the growth of biomass and algae oil content. A significant growth of biomass was obtained when grown in glycerol rich environment comparing to autotrophic conditions. 5 g/L glycerol yielded the highest biomass concentration for these strains. Mixotrophic conditions improved both the growth of the microalgae and the accumulation of triacylglycerols (TAGs). The maximum amount of TAG in Botryococcus braunii was reached in the growth medium with 10 g/L glycerol and Chlorella sp., Nannochloris sp. with 2 g/L glycerol. The content of saturated fatty acids of Chlorella sp., Nannochloris sp., and Botryococcus braunii was found to be 34.94, 14.23 and 13.39%, and the amount of unsaturated fatty acids was 65.06, 85.78 and 86.61% of total fatty acids, respectively. The fatty acid profiles of the oil for the culture possibility met the necessary requirements and are, therefore, promising resource for biofuel production.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권6호
• /
• pp.816-826
• /
• 1998

The effects of rice bran oil on the characteristics of performance and exhaust emissions have been experimentally examined by a single cylinder four cycle direct injection water-cooled and agricultural diesel engine operating at several loads and speeds. The experiments are conducted with light oil blends of rice bran with light oil and rice bran oil as a fuel. The fuel injection timing if fixed to $22^{\circ}$ BTDC regardless of fuel type engine loads and speeds. Any oxygen is not included in light oil while the oxygen contents of 10.7% are included in rice bran oil. The lower calorific value of rice bran oil is less than light oil and the viscosity is very high compared with light oil. In pre-sent study it is found that these major differences of chemical and physical properties control the combustion parameters that affect the performance and exhaust emissions of diesel engines using a rice bran oil as fuels.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권3호
• /
• pp.373-377
• /
• 2009

It is well known that SOx and NOx concentration has a considerable influence on the $N_2O$ emission of the greenhouse gas properties. The quantity of SOx generated during combustion, on fuel specific basis, is directly related to the sulfur content of the fuel oil. However, restricting the fuel oil sulfur content is only a partial response to limiting the overall quantity of SOx emissions, as there remains no over control on the fuel oil consumption other than the commercial pressure which have always directed the attention. This study was carried out as a new basic experiment method of emission control, manly targeted to the vessel. In the experiment, where the scrubbing was achieved through spray tower with high alkaline water made from the electrolysis of seawater, the combined action was to neutralize the exhaust gases (SOx, PM, CO etc.), dilute it, and wash it out. The results showed that SOx reduction of around 95 percent or over could be achieved when using in the high alkaline water, and also leaded to a reduction in the stability of the each pollutant components including the PM (Particulate Matter). The results suggest that the seawater electrolysis method has a very effective reduction of emissions without heavy cost, or catalysts particularly on board.

• Journal of Microbiology and Biotechnology
• /
• 제15권6호
• /
• pp.1183-1188
• /
• 2005

Several lipases of commercial grade were screened to catalyze the methanolysis of castor oil, and an immobilized Candida antarctica (Novozym 435) had the highest activity among the lipases tested. To enhance the yield of methyl ricinoleate, several reaction parameters were optimized. The optimum temperature was $50^{\circ}C$, and the original water content of lipase was sufficient to maintain the activity of lipase, and additional water supplied inhibited the methanolysis of castor oil. Because the lipase was deactivated by methanol, the reaction was tested by three-step addition of 1 molar equivalent of methanol to the oil. However, the oil was not completely converted to its methyl esters. The final reaction mixture using 3 molar equivalents of methanol to the oil consisted of $70\%$ methyl ricinoleate, $18\%$ monoricinoleate, $11\%$ diricinoleate, and trace triricinoleate at the equilibrium state. The yield of methyl ricinoleate was $97\%$ at 6 molar ratio of methanol to the oil with 300g of castor oil and 6g of immobilized Candida antarctica at $50^{\circ}C$ within 24 h.

• 한국해양학회지
• /
• 제26권4호
• /
• pp.324-331
• /
• 1991

해상유출유의 풍화산물인 수분함유 기름 에멀젼(water-in-oil emulsion)의 생성경 향과 안정도, 그리고 생성속도를 16개 원유에 대하여 측정하였다. 해상유출유의 방제 전략적 측면에서 매우 중요한 요인인 에멀젼의 생성방해와 파괴를 위하여 사용되 는 유분산처리제와 에멀젼 파괴제의 성능을 비교하였다. 에멀젼의 생성경향은 사우디 아라비아산 원유와 이란원유, Dubai 원유, (Isthmus) 원유, 중국산 대경 원유 등이 높 게 나타났으며, 80-90%의 함수율을 보였다. 에멀젼의 안정도는 중동산 원유들이 대부 분 높았으며, 에멀젼 생성속도가 빠른 (Istymus) 원유와 대경원유 등은 오히려 불안정 한 특성을 보였다. 에멀젼의 생성경향과 안정도는 원유 중의 아스팔텐 함량과 가장 밀 접한 연관이 있었으며, 황, 바나디움 함량과도 처리제와 에멀젼 파괴제를 이용하여 에 멀젼 형성을 억제하는 능력을 시험한 결과, 국산 유처리제는 기름 용적의 0.2%, 정도 에서, 외산 유처리제와 에멀젼 파괴제는 0.1% 이하에서 방해 효과를 보였다. 에멀젼의 생성 방해효과는 에멀젼의 형성시기를 지연시키지만 함수율을 감소시키지는 못하는 것 으로 보인다. 에멀젼 파괴제인 Alcopol 0 유처리제에 비하여 강력한 파괴능력을 보였 으며, 에멀젼 용적의 0.1% 이하에서 빠르게 에멀젼 내로 침투하여 물과 기름으로 분리 할 수 있었다.

• International Journal of Advanced Culture Technology
• /
• 제8권1호
• /
• pp.236-242
• /
• 2020

In this paper, we present the improvement in low moisturizing ability and stability that existing skin softeners have due to the low oil content, by developing skin softener using nanoemulsion of phospholipid liposome, based on the properties of nanoemulsion in cosmetic formulation. In this study, two types of oil; dimethicone (DC 200/6cs) or medium chain triglyceride (MCT), and two kinds of lecithin; unsaturated or saturated were respectively applied to produce nanoemulsion. In the particle size analysis of nanoemulsion, the droplet size of nanoemulsion containing DC200/6cs and unsaturated lecithin was the smallest, and all nanoemulsion showed high stability in the measurement of zeta potential. Therefore, with the smallest particle size and high stability, moisture contents and trans epidermal water loss(TEWL) were measured using the skin softener of DC200/6cs and unsaturated lecithin contained nanoemulsion, and the measurement was compared with the non-oil skin softener and the skin softener with only small amount of oil. The results showed that the moisture content of the skin softener using nanoemulsion increased greatly than other two skin softeners, showing high hydration ability and water retention capacity, and TEWL decreased greatly, therefore preventing the evaporation of moisture from the skin. As a result, the oil content and stability of the skin softener was improved by utilizing nanoemulson based of phospholipid liposome, and it is expected to be used in various ways in cosmetic industry.