• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.55-58
• /
• 1999

Crosslinked polyethylene/silane crosslinked polyethylene (XLPE/SXLPE) blends were prepared by a twin screw extruder and their water tree growing and electrical breakdown characteristics of XLPE were improved by the addition of SXLPE, when samples were crosslinked only by the thermorolysis of DCP (dicumyl perosxide). However, steam curing process was not good for water tree characteristics. It was also found that the rate of water tree growing of XLPE/SXLPE blend increased when the content of SXLPE was 50 %. AC breadown strength slightly increased by the addition of SXLPE to XLPE when samples were crosslinked only by the thermorolysis of DCP.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제33회 춘계학술대회 개최
• /
• pp.96-99
• /
• 2001

The fatigue life of support bearings is one of the most critical factors for the performance of a control rod driving mechanism. They are operated at high temperature and high pressure and especially lubricated with dramatically low viscosity water. The support bearing is made of standardized 440C stainless steel, and it supports thrust load including the weight of the driving system and external force. Friction and wear characteristics of this material operating under severe lubrication condition is not well known yet, although it is expected to be changed with respect to temperature and boundary pressure. So the friction characteristics are investigated in sliding conditions using the reciprocating tribometer which can simulate the operating conditions. Highly purified water is used as lubricant, and the water is heated up and pressurized. Friction farce on the reciprocating specimens is monitored by the load cells. The results of the experiments are presented in this paper.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2001년도 춘계학술대회 논문집
• /
• pp.95-99
• /
• 2001

As a way to use energy effectively, the present study is aimed at investigating the performance characteristics of a Single Effect LiBr/Water Absorption Refrigerator using a low temperature driving heat-source. It was carried out by changing the driving heat-source temperature, the cold water outlet temperature(the refrigeration load), the cooling water inlet temperature, and the weak solution flow rate and this study compares the performance characteristics of refrigerator against the existence and non-existence of the Recirculation of the Weak solution which is used as a method to improve the performance of refrigerator. In case of Recirculation of the weak solution, more improved the Refrigeration Capacity and COP was obtained, and these effects became more larger in the high temperature of driving heat-source and large quantity of solution.

• 한국지열·수열에너지학회논문집
• /
• 제14권4호
• /
• pp.13-19
• /
• 2018

The Effects of hot water supply temperature on indoor thermal characteristics for floor radiant heating system in residential apartment were researched by computer simulation. The parametric study on hot water supply temperatures with different outdoor air temperatures was done with regard to energy performance and control characteristics, respectively. As a result, the maximum overshoot of indoor air temperature and energy consumption were reduced by adjusting the hot water supply temperatures with outdoor air temperatures.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.76-77
• /
• 2021

compared and reviewed the water repellency and strength characteristics by controlling the surface stamping size and fine aggregate ratio of cement mortar mixed with water repellent as a method to control the ecological imitation surface structure. As a result of measuring the contact angle, the higher the ratio of fine aggregate, the larger the contact angle. The contact angle increased when the surface structure was changed by stamping, and increased as the stamping size became smaller. In the surface stamping of mesh#150, the contact angle was particularly increased.

• 한국해양공학회지
• /
• 제14권3호
• /
• pp.11-19
• /
• 2000

This study aims to examine the characteristics of the water quality variation in relation to the change of water exchange rate with respect to the development phases of the Pusan port. To clarify the characteristics, water exchange caused by the variations of coastline shape and water surface area was examined by the numerical experiments using the Lagrangian particle tracking model based on 2-D shallow water equation. As the results of numerical experiments, it was proved that the water exchange in the Pusan port was decreased mainly due to the port development and the breakwaters construction. During the port development phases from 1875 to 1998, 35% of the sea-space in the port had decreased to make hinterland spaces. This resulted in the loss of wet-land and coastline change as well as decrease of the water exchange rate at the sea side. The city population in that period had rapidly increased from several thousands to 4 millions, resulting in the large discharge of sewages into the port area. Under the these environmental conditions, it can be clearly said that the water quality in the Pusan port is sensitively affected by the discharge of urban sewages decrease of the water exchange rate in relation to port and urban developments. In the study, the temporal changes of water quality were discussed with respect to the port development phases. It was clear that the water quality wad controlled by the exchange rate change under the port development as well as the input impact into the port from the urbanized city area. To make clean sea of the Pusan port, it is suggested that the sewage control, the water exchange and coastline control should be systematically checked under the concept of eco-friendly development and environmental management.

• Structural Engineering and Mechanics
• /
• 제80권5호
• /
• pp.523-538
• /
• 2021

The mechanical behaviour and stability of coal mining engineering underground is significantly affected by ground water. In this study, nuclear magnetic resonance imaging (NMRI) technique was employed to determine the water distribution characteristics in coal specimens during saturation process, based on which the functional rule for water distribution was proposed. Then, using discrete element method (DEM), an innovative numerical modelling method was developed to simulate water-weakening effect on coal behaviour considering moisture content and water distribution. Three water distribution numerical models, namely surface-wetting model, core-wetting model and uniform-wetting model, were established to explore the water distribution influences. The feasibility and validity of the surface-wetting model were further demonstrated by comparing the simulation results with laboratory results. The investigation reveals that coal mechanical properties are affected by both water saturation coefficient and water distribution condition. For all water distribution models, micro-cracks always initiate and nucleate in the water-rich area and thus lead to distinct macro fracture characteristics. With the increase of water saturation coefficient, the failure of coal tends to be less violent with less cracks and ejected fragments. In addition, the core-wetting specimen is more sensitive to water than specimens with other water distribution models.

• 한국습지학회지
• /
• 제17권4호
• /
• pp.339-347
• /
• 2015

저수지의 이용목적에 따라서 수력발전용, 농업용수용, 생활 공업용수용 및 홍수조절용으로 구분한 우리나라 35개 저수지의 호안에서 출현하는 관속식물 종류와 지형, 수문, 물 및 토양 환경을 조사하여 이용목적에 따른 호안 환경과 식물상 특성의 차이를 규명하고자 하였다. 호안의 식물상은 저수지의 용도에 따라서 종수, 종류 및 식물종 특성에서 차이를 나타내었다. 단계별 변수선택법 결과에 의하면 저수지 호안의 출현종수는 중앙수위에서 범람빈도가 높고 호안의 연평균노출기간이 길수록 증가하였다. 주좌표분석과 집괴분석의 결과에서 저수지 호안의 식물상은 이용목적에 따라서 크게 3가지 유형, 홍수조절용과 생활 공업용수용, 농업용 및 발전용 저수지로 구분이 되었다. 식물상의 특성에 영향을 미치는 주요한 환경 요인은 연간 수위변동폭, 중앙수위 연범람빈도, LQI 지수 및 연평균노출기간이었다. 수위가 안정적으로 유지되고 수질이 중영양으로 유지되는 발전용 저수지에서는 종풍부도가 높고 침수식물종을 비롯한 수생식물종이 풍부한 연안대가 발달하였다. 수위변동이 심하고 수질이 빈영양 혹은 중영양인 홍수조절용과 생활 공업용수용 저수지 식물상은 수위변동역에서 단명의 교란지식물이 분포하였다. 수위변동이 중간 정도이고 중영양 또는 부영양인 농업용 저수지에서는 부엽식물과 부유식물과 같은 수면을 덮는 식물종이 특징적으로 분포하였다. 결론적으로 저수지 호안의 식물상 특성은 이용목적에 따라서 수위변동, 수질 등의 환경요인이 차이가 나타나고 이에 따라서 식물상의 구조와 종풍부도가 다르게 나타났다.

• 생태와환경
• /
• 제40권1호
• /
• pp.31-39
• /
• 2007

본 연구에서의 대상 저수지로 유입되는 유역 내의 토지이용은 산림과 농경지가 대부분인 전형적인 농촌유역 특징을 갖고 있다. 토지이용과 수질간의 상관관계를 분석한 결과 밭에서는 모두 양의 상관관계를 나타내고 있으며, 모두 유의 수준 1%이내의 높은 상관성을 나타내었다. 주거지역은 수질과 양의 상관성을 갖는 것으로 나타나서 수질에 악영향을 미치는 것으로 평가할 수 있다. 이는 주거지역의 정화조 유출이나 처리되지 않고 유입되는 불 명수에 의한 수질오염이 원인이라고 판단할 수 있다. 본 연구대상의 48개 농업용 저수지의 수질은 크게 오염되지 않은 상태이며, 주거지역의 점유율이 상당히 낮은 수준이었으나, 주거지역과 수질과는 양의 상관성이었고, 생활하수에 의한 수질오염이 심각한 상태이었다. 밭의 경우는 상관분석 결과, 건기, 우기에서 모두 유의수준 1%이내의 양의 상관관계를 나타내고 있어 수질에 좋은 않은 영향을 미치는 것으로 평가되었다. 밭에서 많은 양의 토사가 유출되는데, 그 자체가 오염물질이고, 토사에 흡착된 오염물질들이 토사로 인해 이동하게 된다. 또한 밭이 여러 가지 작물을 연중 재배하기 때문에 많은 시비로 공급된 질소성분이 강우와 함께 유출, 침투되어 수질오염을 야기하는 것으로 사료되었다. 산지의 경우는 건기와 우기에서 모두 음의 상관관계를 나타내고 있으며, 모두 유의 수준 1%에서 음의 상관성을 갖는 것으로 평가되었다. 따라서 저수지로 유입되는 유역에서 산림의 비중이 높은 지역은 다른 지역에 비해서 저수지 수질을 관리하는데 유리할 것으로 나타났으며, 산림은 오염물질을 배출하는 오염원이기보다는 수질개선에 도움을 주는 토지 이용으로 평가되었다. 본 연구에서 논의 경우도 저수지의 수질에 좋지 않은 영향을 주는 것으로 평가되었는데, 대상 농업용 저수지가 위치 특성상 대부분 관개를 목적으로 유역의 상류에 조성되어 있기 때문에 상대적으로 깨끗한 수질에 적은 발생부하량에도 민감하게 양의 상관관계를 나타낸 것으로 판단된다. 이러한 현상은 물관리를 통해 시비하는 기간의 유출을 최소화하고, 논둑을 이용하여 오염부하량이 큰 초기 강우를 저류하는 특징을 적극 활용하는 등 논의 오염부하를 적절한 관리방법을 도입하면 농업용 저수지의 수질에 유익하게 작용할 수 있을 것으로 판단된다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 봄 학술발표회 논문집
• /
• pp.147-152
• /
• 2001

This study investigated one-dimensional vertical infiltration to an unsaturated residual soil by numerical solutions, FDM. In order to estimate the parameters needed for numerical analysis, tire soil-water characteristic curve(SWCC) of Shinnae-dong soil, one of the most typical residual soils in Korea, were experimentally obtained. Then, the statistical analysis for obtaining the SWCC was performed. The numerical solution to the linearized governing equation for unsaturated groundwater flow provides the infiltration characteristics for the unsaturated residual soil represented by transient pressure profiles and water contents profiles.