• 제목/요약/키워드: Wastes characteristics

검색결과 456건 처리시간 0.027초

Stabilization of expansive soil using industrial wastes

  • Mohanty, Soumendra K.;Pradhan, Pradip K.;Mohanty, Chitta R.
    • Geomechanics and Engineering
    • /
    • 제12권1호
    • /
    • pp.111-125
    • /
    • 2017
  • Swelling and shrinkage characteristics of expansive fine grained soil cause volumetric changes followed by distress and damage to the structures. Soil stabilization can be explained as the alteration of the soil properties by chemical, mechanical or any other means in order to enhance the engineering properties of the soil. Utilization of industrial wastes in soil stabilization is cost effective and environment friendly. This paper presents an experimental study on stabilization of expansive soil using industrial wastes, viz. fly ash and dolochar. The paper includes the evaluation of engineering properties like unconfined compressive strength and California bearing ratio (CBR) of expansive soil collected from Balasore district of Odisha stabilized with fly ash and dolochar in different proportions and to predict the influence of these additives on engineering properties and strength characteristics of expansive soil. Both fly ash and dolochar were found to increase the CBR and decrease many index properties such as liquid limit, plastic limit, plasticity index, swelling index and UCS, thus enhancing the strength parameters of expansive soil.

합성고분자류 폐기물의 화염열분해 가스화에 의한 발생가스의 연소특성 및 가스엔진시스템에의 적용연구 (Combustion Characteristics of Synthetic Gas from Flame Pyrolysis Gasification of Polymetric Wastes and their Applicability to Gas Engine System)

  • 김태권;장준영;심성훈;김정배;김병하
    • 한국수소및신에너지학회논문집
    • /
    • 제10권4호
    • /
    • pp.233-243
    • /
    • 1999
  • Combustion characteristics of synthetic gas from flame pyrolysis gasification of polymetric wastes are reported and the applicability of synthetic gas from flame pyrolysis gasification to a gas engine system is presented. Engine power is easily predicted by the volume percentage of the synthetic gas. Measurements have been made to obtain the range of flame existence in the function of volume percentage of CO and $H_2$ gases in the synthetic gas. In order to clarify the emission of the flames, NOx measurements by chemiluminescent analyser are taken in flames with different equivalent ratios. From the results of the engine performance data we also have demonstrated that the output of the gas engine modified from a LPG engine is about 5 ps at normal rating. We conclude that synthetic gas from flame pyrolysis gasification of polymetric wastes is applicable to a gas engine system.

  • PDF

재생 알루미늄 산화물을 이용한 비소 흡착 특성 (Adsorption Characteristics of Arsenic using the Recycled Aluminium Oxide)

  • 민경철;김원기;이승목;김근한;이희용;양재규;박연종
    • 한국물환경학회지
    • /
    • 제27권4호
    • /
    • pp.486-490
    • /
    • 2011
  • As(V) adsorption on aluminum oxide powder which was recycled from industrial wastes containing aluminum hydroxide was evaluated. Aluminum oxide powder in this study was prepared by calcinating aluminum hydroxide wastes at$550^{\circ}C$. Spectroscopic analysis indicated that the aluminum hydroxide wastes were changed to aluminum oxide by calcination. Arsenic adsorption isotherm was conducted with variation of ionic strength and multiple-ion systems using Ca(II) and Cu(II). As(V) removal showed typical anionic adsorption characteristics that the removal efficiency decreased with increasing pH in single As(V) system as well as in binary and ternary system. More than 80% of As(V) at an initial concentration of $5{\times}10^{-5}$ M was removed from aluminum oxide powder in As(V) single system. The effect of ionic strength on As(V) adsorption was negligible, which indicated the strong bonding between aluminum oxide powder and As(V). The removal efficiency of As(V) was higher in a binary system with Cu(II) than in a binary system with Ca(II).

폐석회를 이용한 매립지 차수재 개발 (A Development of Landfill Liner by Utilizing Waste Lime)

  • 김준섭;이승학;박준범
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 1999년도 봄 학술발표회 논문집
    • /
    • pp.521-528
    • /
    • 1999
  • As the size of our industry and population inclose, the byproducts such as municipal solid wastes, industrial wastes are in the increasing phase. The treatment of such things is rising as a social problem. Today, the final disposal of these wastes depends mostly on the landfill, and the sanitary landfill is required and designed for preventing soil and groundwater contamination. Clays have been used for a liner material of a sanitary landfill, however, the high quality clay is hard to come by and quite expensive as a lining material in our country. Using the waste lime produced abundantly every year from chemical processes was studied here, made from the proper mixing of the bentonite and the waste lime meets the regulations from the USEPA. The soil property index tests (sieve analysis, specific gravity test Atterberg limit test) were performed, and at last to confirm the sorption characteristics of the bentonite and the waste lime the sorption isotherm equilibrium test and the sorption isotherm were performed with Toluene and Ethylbenzene which are the main components of the leachate from the landfill.

  • PDF

산업폐기물을 활용한 식생기반 조성에 관한 연구 (A Study on the layer construction for vegetation using industrial wastes)

  • 유찬;양기석;유시창;조병진;안병관
    • 한국농공학회:학술대회논문집
    • /
    • 한국농공학회 2003년도 학술발표논문집
    • /
    • pp.219-222
    • /
    • 2003
  • Bech scale tests were performed to evaluate the adaptability of industrial wastes, especially bottom ash, salg and phosphogypsum among others, for constructing the surface layer of a landfill or reclamation, which function is a vegetation base layer. In the test, columes test were used to check the extraction characteristics of wastes and small PVC soil-box that equipped the drainage device was used to model a performance of layers and to monitor the growth of plants at the composite layer of those. Tests have been continued during one and half year and It has been verified that bottom ash and phosphogypsum look like as a valuable material to safely reuse as the vegetation base layer even though some unconfined factors are remain.

  • PDF

Five Previously Unrecorded Fungal Species Isolated from Marine Plastic Wastes in South Korea

  • Ji Seon Kim;Sung Hyun Kim;Wonjun Lee;Chang Wan Seo;Jun Won Lee;Ki Hyeong Park;Young Woon Lim
    • Mycobiology
    • /
    • 제50권6호
    • /
    • pp.420-428
    • /
    • 2022
  • Plastic wastes have a negative impact on marine environments; however, they can be used as carbon sources and habitats by certain microbes. Microbes in the marine plastisphere can migrate worldwide through the ocean and cause serious environmental problems when they encounter suitable environments. Therefore, efforts to investigate the microbes inhabiting the marine plastisphere are increasing. In the present study, fungal strains were isolated from plastic wastes buried in Korean sea sands and mudflats and identified using molecular and morphological analyses. Five species were identified that were previously unrecorded from South Korea: Cladosporium funiculosum, Neosetophoma poaceicola, Neosetophoma rosigena, Parasarocladium gamsii, and Trichoderma fomiticola. Their molecular phylogenies and morphological characteristics are described in this study.

순천시의 생활폐기물 발생량 예측 및 재활용시설의 용량산정에 관한 연구 (A study on the physico-chemical characteristics of municipal solid wastes generated in the sunchon city)

  • 허관;문옥란;왕승호
    • 유기물자원화
    • /
    • 제9권4호
    • /
    • pp.125-134
    • /
    • 2001
  • 순천시 생활계폐기물의 배출특성을 제시하고 장래 폐기물대책을 수립하는 기본적인 자료로 정보를 제공하고자 폐기물별 자원화시설의 용량을 산정하고 재활용시설의 운영관리 및 제반폐기물정책 수립에 활용하도록 하기 위해서 조사분석하여 다음과 같은 결과를 얻었다. 일반주택의 배출량원단위는 0.50kg/인${\cdot}$일로 배출량은 41.9톤/일, 공동주택의 배출량원단위는 0.45kg/인${\cdot}$일로 배출량은 55.5톤/일, 읍 면지역의 배출량원단위는 0.22kg/인${\cdot}$일로 배출량은 13.5톤/일로 나타나 주택지역의 생활계폐기물 배출량은 110.9톤/일이다. 재래시장의 배출량원단위는 1.85kg/상가 일로 배출량은 5,400kg/일이며, 소규모점포의 배출량원단위는 2.03kg/상가 일로 배출량은 25,101kg/일로 나타나 상가지역의 생활계폐기물 배출량은 30,501kg/일이다. 공장지역에서 배출되는 사업장생활계폐기물은 1일 평균 8.3톤, 학교와 병원 및 업무지역에서 배출되는 생활계폐기물의 1일 평균배출량은 각각 7.2kg과 3.0kg 및 6.6kg이다. 생활폐기물 중에서 음식물쓰레기는 평균 63.4톤/일 배출되었으며, 소각대상 가연성폐기물은 126.9톤/일 배출되었다. 음식물쓰레기처리시설의 내구년도를 약 5년(2006년도)으로 계획하면 처리대상량은 1일 42.4톤이 예상되며, 저부하 운전이나 고장보수로 인한 가동중지 등의 문제를 고려하여 처리능력을 25톤/일${\times}$2계열로 설치하는 것이 효율적일 것으로 판단된다. 소각처리시설의 내구년도를 약 10년(2011년도)으로 계획하면 처리대상량은 1일 150톤/일이 예상되며, 저부하 운전이나 고장보수로 인한 소각작업 중지 등의 문제를 고려하여 처리능력을 80톤/일${\times}$2계열로 설치하는 것이 효율적일 것으로 판단된다.

  • PDF

음식물찌꺼기 고온산발효산물과 하수슬러지의 혼합처리 (Co-digestion of Thermophilic Acid-fermented Food Wastes and Sewage Sludge)

  • 안철우;장성호;박진식
    • 한국환경과학회지
    • /
    • 제15권9호
    • /
    • pp.897-905
    • /
    • 2006
  • This study has been conducted to investigate biodegradation characteristics and optimum mixing ratio for co-digestion with thermophilic acid-fermented food waste and sewage sludge using batch anaerobic digester. As the basis operating conditions for anaerobic digestion, the reaction temperature was controlled $35{\pm}1^{\circ}C$ and stirrer was set 70rpm. Thermophilic acid-fermented food waste and sewage sludge were mixed at the ratio of 10:0, 7:3, 5:5, 3:7, 0:10 and 5;5(food waste : sewage sludge) as the influent substrates. In results of co-digestion according to mixing ratio of thermophilic fermented food wastes and sewage sludge in batch mesophilic anaerobic digestion reactor, $385mL\;CH_4/g\;VS_{added}$ of methane production rate at 1:1 mixing ratio was more than that of any other mixing ratios. Compared with $293mL\;CH_4/g\;VS_{added}$ of methane production rate at 1:1 mixing ratio of food wastes and sewage sludge, pretreatment of food wastes by thermophilic acid fermentation was more effective in co-digestion with sewage sludge.

음식물류폐기물의 성상별 온도변화에 따른 혐기성소화 효율 비교 연구 (Comparison of Anaerobic Digestion Efficiency with Different Temperature of Food Wastes)

  • 황광현;김동익
    • 한국물환경학회지
    • /
    • 제35권4호
    • /
    • pp.332-339
    • /
    • 2019
  • A comparative study on the anaerobic digestion efficiency according to the temperature change was conducted considering the characteristics of domestic food wastes with high water content of about 80 % or more. The substrate was tested for anaerobic digestion efficiency in two substrates, a liquid component separated naturally from food waste and food waste itself. In the anaerobic digestion experiments, the digestion efficiency was the highest at $55^{\circ}C$ (thermophilic temperature). However, the digestion efficiency at $45^{\circ}C$(middle high temperature) was lower than that at $35^{\circ}C$(mesophilic temperature). The comparison of general food wastes anaerobic digestion requiring 30 days of hydraulic retention time to the liquid component indicated a stable digestion efficiency even after 15 days of hydraulic retention time.In the experiments conducted on food waste, the digestion efficiency at $55^{\circ}C$ was higher than that at $35^{\circ}C$. When the food waste, especially the liquid component originating from food waste, is treated by anaerobic digestion method, the mesophilic temperature and thermophilic temperature conditions are more favorable in the digestion efficiency than the middle high temperature ($45^{\circ}C$). However, when applying thermophilic or mesophilic temperature anaerobic digestion process operation in the field, the amount of energy input should be considered.