• Journal of the Korea Organic Resources Recycling Association
• /
• v.15 no.2
• /
• pp.98-108
• /
• 2007

In order to use food wastes for the source of fermented feed for pigs, this study was aimed to produce better culture inoculum by the aeration and addition of pig' s blood meal as sub nutrient. For the preparation of inoculum as bacterial strain, Lactobacillus brevis isolated from pig intestine, and a yeast Saccharomyces cerevisiae from strawberries were used. Molasses and whey were used as main ingredients for the culture solution as well as yeast extract and other ingredients as sub nutrients. As the experimental result, aeration showed a positive effect to enhance viable cell count or retarding death phase. Although sub nutrient yeast extracts were replaced with pig's blood meal, fermentation characteristics were almost similar to that of yeast extract. When the inoculum was stored at room temperature, L. brevis and S. cerevisiae maintained the viable cell concentration of approximately 8 log cfu/mL for 1 week. 2 Days after the culture solution was mixed with food waste, the number of unwanted bacteria had rapidly increased, but E.coli was not detected for 5 days.

• Applied Biological Chemistry
• /
• v.27 no.4
• /
• pp.231-237
• /
• 1984

Culture conditions for yeast production from the acid hydrolyzate of the 2nd waste composts of oyster mushroom (Pleurotus ostreatus) were determined. Among the yeast strains tested, Candida quilliermondii JAFM 215, which was culture at $30^{\circ}C$, pH 5.0, showed good culture yield. Yeast production was the highest yield with the medium composition of 0.3% $NH_4Cl$, 0.15% $KH_2PO_4$, 0.02% $MgSO_4{\cdot}7H_2O$, and 0.05% $CaCl_2$. Yeast growth was increased at the concentration of 0.001 to 0.01% furfural, but at the higher concentration the yeast growth was inhibited. Utilization rate of sugar was 86.2%, and yield of yeast from sugar was 50.45%. Crude protein of yeast ranged from 50 to 52%.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.6
• /
• pp.52-58
• /
• 1996

Using the acoustic resonances and oscillatory pulsations considered as the branch of wave technologies, the concept of the acoustic resonance diffusers for waste water treatment which maximize the oxygen transfer efficiency in gas-liquid two phase medium have been proposed, and studies for the principles and performance tests were accomplished. Besides, the design concepts for the low pressure Helmholtz resonator, cylinder and annular type reflection resonator and combined type resonance system have been implemented. The acoustic resonance energy which can speed up the mass transfer process increase the oxygen transfer efficiency, and periodic pulsations generated from the instability of air jet from nozzle make very small air bubbles. Then, the annular type jet resonator(AJR) applying these two principles successfully was evalulated as the most promising device and also the efficiency showing $20{\sim}30%$ better than conventional diffusers has been verified experimentally.

• Journal of Korean Society for Atmospheric Environment
• /
• v.33 no.6
• /
• pp.533-543
• /
• 2017

As the public interest in environmental issues increased, the "Act On The Integrated Control Of Pollutant-Discharging Facility" was enacted. Through the integrated environmental pollution prevention act in which 19 industries with large environmental impacts are sequentially applied, pollutants can be managed in a medium-integrated manner and integrated permission of the business unit is possible and BAT can be applied to enable a scientific and proactive environmental management system. In order to facilitate the implementation of integrated environmental pollution prevention act with these advantages, the BAT BREF should be published, modified and revised every 5 years considering the level of scientific development. This study reviewed the issues to be considered in applying BAT and the types of BAT and focused on presenting improvements and development direction when revising and supplementing the standards in the future based on these contents. For this purpose, when revising the standards, it will be necessary to reflect on the domestic situation, to expand the TWG(Technical Working Group) of small-scale workplace experts, and to exchange opinions with business places that have similar processes for each waste type through a systematic total inspection. In addition to these methods, by establishing a resident participation system through information disclosure, it is expected to be used as a guideline for environmental management of business places not subject to integrated permission of less than 3 types as well as those subject to integrated permission.

• Journal of Environmental Science International
• /
• v.16 no.12
• /
• pp.1337-1343
• /
• 2007

The aim of this study was to isolate chicken feather-degrading bacteria with high keratinolytic activity and to investigate cultural conditions affecting keratinolytic enzyme production by a selected isolate. A chicken feather-degrading bacterial strain CH3 was isolated from poultry wastes. Isolate CH3 degraded whole chicken feather completely within 3 days. On the basis of phenotypical and 16S rDNA studies, isolate CH3 was identified as Bacillus thuringiensis CH3. This strain is the first B. thuringiensis described as a feather degrader. The bacterium grew with an optimum at pH 8.0 and $37^{\circ}C$, where maximum keratinolytic activity was also observed. The composition of optimal medium for keratinolytic enzyme production was feather 0.1%, sucrose 0.7%, casein 0.3%, $K_2HPO_4$ 0.03%, $KH_2PO_4$ 0.04%, $MgCl_2$ 0.01% and NaCl 0.05%, respectively. The keratinolytic enzyme had a pH and temperature optima 9.0 and $45^{\circ}C$, respectively. The keratinolytic activity was inhibited ethylenediaminetetraacetic acid, phenylmethylsulfonyl fluoride, and metal ions like $Hg^{2+},\;Cu^{2+}\;and\;Zn^{2+}$. The enzyme activated by $Fe^{2+}$, dithiothreitol and 2-mercaptoethanol.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.10 no.6
• /
• pp.576-581
• /
• 2005

Phytase improves the bioavailability of phytate phosphorus in plant foods to humans and animals, and reduces the phosphorus pollution of animal waste. We have engineered the cell surface of the yeast. Saccharomyces cerevisiae, by anchoring active fungal phytase on its cell wall, in order to apply it as a dietary supplement containing bioconversional functions in animal foods and a whole cell bio-catalyst for the treatment of waste. The phytase gene (phyA) of Aspergillus niger with a signal peptide of rice amylase 1A (Ramy1A) was fused with the gene encoding the C-terminal half (320 amino acid residues from the C-terminus) of yeast ${\alpha}-agglutinin$, a protein which is involved in mating and is covalently anchored to the cell wall. The resulting fusion construct was introduced into S. cerevisiae and expressed under the control of the constitutive glyceraldehydes-3-phosphate dehydrogenase (GPD) promoter. Phytase plate assay revealed that the surface-engineered cell exhibited a catalytically active opaque zone which was restricted to the margin of the colony. Additionally, the phytase activity was detected in the cell fraction, but was not detected in the culture medium when it was grown in liquid. These results indicate that the phytase was successfully anchored to the cell surface of yeast and was displayed as its active form. The amount of recombinant phytase on the surface of yeast cells was estimated to be 16,000 molecules per cell.

• Journal of Environmental Impact Assessment
• /
• v.29 no.4
• /
• pp.239-251
• /
• 2020

The Off-site Risk Assessment (ORA) for preventing chemical accidents estimates the chemical accident risk at chemical plants. The method of estimating the risk is made by multiplying the number of residents within the effect area of the chemical accident and the frequency of accidents at a chemical plant. At present, the ORA does not quantitatively consider environmental receptors when the damage types within the scope of the accident are environmental receptors. In order to solve this problem, this study proposes a method of estimating the risk considering resident and environmental receptors. Through these studies, it was confirmed that the ORA impact for the prevention of chemical accidents requires risk analysis considering environmental receptors in the medium and long term.

• The Korean Journal of Mycology
• /
• v.37 no.1
• /
• pp.73-79
• /
• 2009

As waste-water disposal plants and oxidative biodegradation for the removal of waste polyaromatic dyes are proved to be ineffective due to the chemical stability of dyes, we studied various strains of mushroom fungi for the removal of these dyes. 100 fungi were isolated from the mushroom samples of 230 species collected in Korea. The growth medium containing a dye (Bromophenol Blue, Congo Red, or Methylene Blue) was inoculated to 10% and incubated for 7 days without shaking. The six strains which removed dyes effectively were selected for further studies with respect to removal of polycyclic aromatic dyes. For all strains, the rate of decoloration of dyes was increasing with Methylene Blue, Bromophenol Blue and Congo Red. The rate of decoloration was higher with stationary culture than with shaking culture. Adsorption of the dyes was the highest with Congo Red.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.5
• /
• pp.179-193
• /
• 2002

Waste foundry sands were tested to determine their leaching characteristics when used as reactive media in permeable reactive barriers (PRBs). Water leach tests and column leach tests were performed on twelve foundry sands and three reference materials such as Peerless iron, a local fill material, and torpedo sand. The latter three materials were tested to compare concentrations of heavy metals and anions found in other materials commonly placed below the groundwater table with those from the foundry sands. Results of water leach tests md total elemental analyses showed that all of the laundry sands are Category 2 materials per Section NR 538 of the Wisconsin Administrator Code. However, tests on Peerless iron, torpedo sand, and a typical fill material indicate that these materials, which are commonly placed below the groundwater table, also are Category 2 materials. Thus, using foundry sand as a PR3 medium should pose no greater risk than that imposed using conventional construction materials.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.2
• /
• pp.325-335
• /
• 1992

In this work, direct contact 4-stage fluidized bed heat exchanger is experimentally studied to develop a new type of heat exchanger which recovers the energy contained in the high temperature waste gas exhausted from the industrial furnaces. A sand is used as a heat transfer medium in this experiment. To determine the optimum operating condition, 11 different perforated plates which have a different free area ratio with different hole diameter are used in the experiment. From the room temperature experiment, the pressure drop which is caused by fluidized bed formation is observed. The high temperature experiment is carried out to seek the optimum operating condition of high heat efficiency at low heat exchanger operation cost. The results of experiment are as following. The pressure drop in the high temperature condition can be predicted from the results of the room temperature experiment. And Nusselt number becomes smaller due to the increased interference between sand particles as Reynolds number increases when the dilute phase fluidized beds are formed in nigh temperature condition. But heat transfer amount through the total sand surface area become larger due to the large resident amount of sand. Considering the heat transfer amount and the heat exchanger operation cost, perforated plates which have either a 30% or 35% of free area ratio with 15mm of hole diameter are best fitted for our goal of this work. The values of .phi. which is a dimensionless number representing the absorption heat amount per unit sand rate are in the range from 0.4 to 0.5, when Reynolds number of waste gas ranges from 25-30 with these perforated plates.