• Clean Technology
• /
• v.8 no.3
• /
• pp.129-139
• /
• 2002

This is the study for recycling waste foundry sand. Authors studied about main subject of grading of aggregate and three experimental items such as physical properties of waste foundry sand, optimum grading for concrete products of low water ratio, and quality variations of concrete products according to substitution proportion of fine aggregate as waste foundry sand. We were convinced of following results by experimental study. The first was that waste foundry sand was not fit as the aggregate for concrete because of bad qualities such as grading, unit weight, solid volume and passing 0.08 mm seive, so it is proper to composition using with other fine aggregetes. The second was that optimum grading is fineness modulus of 2.77 to 3.28 And the last is that optimum condition about substitution proportion as waste foundry sand is 10% fine aggregate.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.15 no.4
• /
• pp.362-371
• /
• 1986

In the normal Refrigeration process, the condensation heat of refrigerant s not been used because of its low-temperature waste heat. To recover the condensation waste heat of R-12 refrigerator, a drying and hot water system was designed and experimented. The results obtained were summarized as follows: 1. As the temperature a temosphere was increased, the temperature of discharge gas of compressor was increased. And the temperature was $80-84^{\circ}C$ for air condensing type and was $68-71^{\circ}C$ for water condensing type during summer. 2. The condensation waste heat could be obtained up to $50-55^{\circ}C$ of drying heat-source and Hot water in summer. In this case, recovered rate was about $73\%$. And the more temperature of drying Heat-source and Hot water were increased, the more a recovered rate were decreased. 3. When comparing drying characteristics of Agro-products in dryer of waste heat utilization and Hot air, there was no quality difference in products. But drying time of the former was 3 Hours longer than the latter. 4. The condensation waste heat of compressor could be applied into the drying of marine products, the predrying of agro-products and making hot water. And showed high possibility of the waste heat using in low-temperature storage.

• Korean journal of food and cookery science
• /
• v.18 no.4
• /
• pp.426-432
• /
• 2002

The purpose of the study was to identify the standards of quality management in contract foodservice companies. The subject companies were selected by convenient sampling and surveyed for their standards. The questionnaire consisted of 7 categories: managements of food procurement, menu, production, personnel, equipment, information system, and solid waste. As a result of the study, 60% of the respondents appeared to use standard recipes, 51.5% of them spent 21-30% of the total cost as a labor cost, and 70% were reluctant to answer the food cost. The half of the respondents had job description and specification, 74.76% had training manuals on foodservice and computer software program, and 80.6% had a training program for solid waste management.

• Environmental Analysis Health and Toxicology
• /
• v.16 no.4
• /
• pp.153-159
• /
• 2001

The main point source of pollution of the Keumho river in Taegu, Korea, stems from waste from the areas of industrial complexes . Although it is widely accepted that pollutants in waste water negatively effects general water quality, it is difficult to evaluate the effluent effect because of varying conditions in ambient water and inconclusive knowledge of causative pollutants. To analyze the water in relation to the industrial effluent in the area, pH. temperature, conductivity, and Microtox toxicity of various river samples were measured. Water samples were collected every 2 hours for 36 hours from Keumho river and Dalseo stream. Data from continuous monitoring for 36 hours showed that effluent in Keumho river originated from Dalseo stream, which is near adjacent to industrial complexes. Change in toxicity and other factors tested during the 36 hours indicated that continuous monitoring was necessary for a satisfactory effluent toxicity test Furthermore, in addition to water quality monitoring, it was concluded that sediment toxicity also needed to evaluate effluent effects.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.11a
• /
• pp.901-904
• /
• 2006

The government makes efforts to expand the recycling activities of construction waste soil and to increase the usage of recycled aggregate. Accordingly, it has defined the compulsory usage and quality standard by usage of recycled aggregate. To satisfy these efforts requires both technology to produce recycled aggregate which meets the required quality and companies with the technology. Therefore, it requires to review a current status of facilities at the companies which deal with construction wastes. The companies dealing with construction wastes gradually produce the high quality of recycled aggregate. In particular, companies which has over 3-stage processing system for waste concrete continue to increase and means to remove foreign substances are gradually improved.

• Journal of the Korean Dietetic Association
• /
• v.7 no.4
• /
• pp.410-425
• /
• 2001

This study was designed to assess the waste management practices, source-reduction programs and related tasks in elementary school foodservice in Seoul. and Kyonggi Province Areas. A questionnaire mailed to 910 school foodservice managers in Seoul and Kyonggi province: a 202% (N=184) response rate was obtained. About 83.7% of school foodservice managers were responsible for managing solid waste. Most foodservice operations take the responsibility of food waste but not packaging wastes. The average disposal cost per month per person was about 19 won and income was about 35 won. Leftovers were mainly disposed with platewaste. Platewaste was reused for the livestook feed(68.0%), and some platewaste was composted(11.6%). Source reduction programs implemented in half of school foodservice operations were adjustment of portion size', checking the plate waste', 'working with classroom teachers on waste reduction campaign', 'providing information leaflet on food waste minimization', posting education materials, 'classroom instruction about food waste minimization', and 'improving cooking method. According to factor analysis based on importance rating. slid waste management activities of elementary school foodservice operations were divided to 7 dimensions such as communication and cooperation with others', 'employee training', 'product quality control, 'yield control', plate waste control', 'purchasing', and 'public relations'. As a result of Important-Performance Analysis(IPA), sine dimensions such as 'communication and cooperation with others' and 'plate waste control were identified in Focus Here' quardrant area which need more enhanced performance.

• Journal of Environmental Health Sciences
• /
• v.35 no.3
• /
• pp.226-234
• /
• 2009

The main objective of this study was to evaluate the effects on shape and size, compressive strength, water absorption and heavy metals leaching with various weight mixing ratios in waste ash brick products using waste recycling MSWI(Municipal Solid Waste Incinerator) bottom ash, steel slag and waste building material. The manufacturing processes for the waste ash brick consist of screening, mixing, conveyor transmission, compaction.forming, and curing steps of raw materials. The weight mixing ratios of steel slag around bottom ash were adjusted within the ranges of 10% to 30%. The reported results show that the width and thickness of the manufactured waste ash brick could be satisfied with $90{\pm}2mm\;and\;57{\pm}2mm$, respectively which are K.S. standards of products qualities. And in case of length, only 20-Ba50Ss30, 20-Ba60Wb20 and 20-Ba50Wb30 for the mixing ratios could be satisfied with $190{\pm}2mm$ that is K.S. standards of products quality. The compressive strength and water absorption for 20-Ba50Ss30 and 20-Ba70Wb10 were over $8N/mm^2$ and below 15% respectively that are K.S. standards of manufactured waste ash brick. The results of tests for the heavy metals leaching in the all manufactured waste ash bricks are also passed to the wastes management regulations. The cost analysis of 20-Ba50Ss30 is evaluated. The manufacturing cost is evaluated 34.3 won/brick with 8 hours and 20tons of raw material per day. Incinerators with problems in bottom ash disposal can therefore derive significant benefits from the application of waste ash brick production.

• Food Science of Animal Resources
• /
• v.37 no.5
• /
• pp.690-697
• /
• 2017

Despite the benefits associated with the use of food waste (FW), there are mixed consumer perceptions regarding pork quality harvested from pigs fed FW. Twenty crossbred pigs were selected for the present study. Ten pigs were fed a conventional diet (control group), and the other 10 pigs were given a conventional diet and FW (FW group) during different growth stages. Meat quality in the FW group showed deteriorative qualities with higher lightness and yellowness synonymous to pale soft exudative meat. Drip loss in the experimental group was significantly higher than that in the control group (p<0.01). The contents of polyunsaturated fatty acids in the FW group were higher and those of saturated and monounsaturated fatty acids were lower than those in the control group. The contents of thiobarbituric acid were significantly different between the control and FW groups (p<0.05). There was also a significant difference between the control and FW groups in terms of off-flavor (p<0.05) after sensory evaluation. To conclude, the off-flavor noted, including other inferior pork quality traits, in the FW group implies that FW should not be used as swine feed.

• Journal of Construction Engineering and Project Management
• /
• v.4 no.2
• /
• pp.12-22
• /
• 2014

Over the last decade, Saudi Arabia has experienced significant economic increases as evidenced by the 30% growth in its gross domestic product; furthermore, the construction industry has increased 10% in the same time period. Due to this significant growth, the construction industry is encountering issues related to construction quality resulting in significant waste and associated environmental impacts. In this research, we applied our previously developed framework that integrates three different methods-Lean, Green, and Six-sigma - to a residential construction complex in Saudi Arabia. Our aim of this case study was to explore the application of the framework in practice to glean quantitative results and further validate the framework. In the case study, we used the developed framework to identify a significant issue related to quality and delays - final completion of 53 residential units was delayed because of failed exterior buildings surfaces. We then used the framework to define the causes behind the defects via a field investigation of the 53 units. Of the defect, construction execution was responsible for 43% of the defect, 31% untrained workers, 19% unfavorable construction weather condition, with 7% accounting for other issues. A procedure was developed in concert with the construction manager and overall developer reducing the amount of rework and waste causes revealed by the field examination and the framework. Although two steps were added to the original construction process to overcome waste causes, still save a lot of resources and reduces environmental impact. In summary, we found that the Lean, Green, Six-sigma framework increased productivity, quality, and reduced waste.

• The Journal of Engineering Geology
• /
• v.33 no.2
• /
• pp.323-334
• /
• 2023

The vast volumes of data that are generated during site characterization and associated research for the disposal of high-level radioactive waste require effective data management to properly chronicle and archive this information. The Swedish Nuclear Fuel and Waste Management Company, SKB, established the SICADA database for site selection, evaluation, analysis, and modeling. The German Federal Company for Radioactive Waste Disposal, BGE, established ArbeitsDB, a database and document management system, and the ELO data system to manage data collected according to the Repository Site Selection Act. The U.K. Nuclear Waste Services established the Data Management System to manage any research and survey data pertaining to nuclear waste storage and disposal. The U.S. Department of Energy and Office of Civilian Radioactive Waste Management established the Technical Data Management System for data management and subsequent licensing procedures during site characterization surveys. The presented cases undertaken by these national agencies highlight the importance of data quality management and the scalability of data utilization to ensure effective data management. Korea should also pursue the establishment of both a data management concept for radioactive waste disposal that considers data quality management and scalability from a long-term perspective and an associated data management system.