• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.18 no.1
• /
• pp.153-163
• /
• 2015

The study was conducted to develop ecological restoration method of damaged area in DMZ vicinities. As the material for the ecological restoration, forest soil and trees waste have been used. Forest soils were collected for experiments in Yanggu, Gangwon Province. Effect of ecological restoration was analyzed through germination experiment. Germination experiment was performed using 12 kinds of woody and herbaceous seeds. Woody and herbaceous seed germination in test pot was relatively evenly. Mixed material consisting of forest soil and trees waste seemed a possibility as the material for the restoration. The effects on seed germination were higher in the case of mixing more than 70% by volume ratio of local resources. Total number germinated individuals were different depending on the mixing ratio of soil sampling depth. Individual plants showed different trends depending on the experimental combination. Results of the woody seed germination were affected only in the soil sampling depth. Seed germination of herbaceous received a combined effect on soil sampling depth and mixing ratio.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.5 no.5
• /
• pp.58-66
• /
• 2002

We present a planting plan of the buffer-forest belts created at the boundary area of the waste landfill site which is located in the coastal area of Kyubg-Gi province. In order to form a proper section of ground soil excavated from the sea and a forest which shows a distinction of the vegetation stratification, the planting plan with trees, sub-trees, shrubs, and seedlings (produced at a sprout cultivation place) is devised with an adjustment of planting density. 1. The preparation of mounding is required for planting at a waste landfill site. We first estimate an economical and efficient banking height together with the quantity of soil, and prepare a planting ground with excavated ground soil for the consideration of soil recycling. On the planting ground a banking with a height of 1.5-2m is produced by self-supported soil, playing a role in a salt blocking and an irritation layer of planting. Finally, an additional banking with a height of 2m is produced by qualified vegetation soil, forming a vegetation section with a total height of 6m. 2. Since the planning site is located in the border, the planting area is composed of two regions : one is an inclined face (slope 1 : 3) toward the inside of the landfill site and the other is an inclined face (slope 1 : 4) toward the inland. The buffer planting in the former (latter) region consists of wind break forest (mixed-landscape forest) within a width of less than 35m. 3. Based on the data obtained from the literatures and the investigation of local plants, we choose the 21 plant species (such as Pinus thunbergii, Pinus densiflora, Sorbus alnifolia, Albizzia julibrissin and etc.) and the additinal 7 species which are grown at a sprout cultivation palce of the SUDOKWON landfill site (Rosa rugosa, Quercus acutissima, Prunus armeniaca var. ansu., and etc.). Sub-trees with a height of above 2.5m and seedlings are planted with an interval of $1.5{\times}1.5m$ ($0.45roots/m^2$) and $0.5{\times}0.5m$ ($4roots/m^2$), respectively. Here, both trees exhibit communities planting with more than three rows. Shrubs are planted with $9-16roots/m^2$, depending on their size. Since this case study provides a reference of the planting beds as well as a planting plan at the SUDOKWON landfill site, it is not sufficient for the present plan to be utilized for the formation of buffer-forest belts which are used for the analysis of environmental factor and the reduction of environmental pollutants in the sea waste landfill site. Thus, further studies with the ecological basis are demanded for the environment planting restoration in the sea waste landfill site.

• Journal of Korean Society of Forest Science
• /
• v.96 no.3
• /
• pp.369-375
• /
• 2007

We examined two Populus species (Populus euramericana and Populus alba ${\times}$ Populus glandulosa) trees grown under livestock waste leachate treatment in the field. We investigated their physiological properties (photosynthetic rate, chlorophyll contents, transpiration rate and intercellular $CO_2$ concentration) and antioxidant enzyme activities. Ascorbate peroxidase and glutathione reductase were analyzed. According to our measurements, P. euramericana at control site showed a lower total chlorophyll contents, photosynthetic rate, intercellular $CO_2$ concentration, transpiration and stomatal conductance than those of trees at treatment site. P. alba ${\times}$ P. glandulosa showed low stomatal conductance and low photosynthetic rate.

• Journal of Environmental Impact Assessment
• /
• v.30 no.3
• /
• pp.155-163
• /
• 2021

The number of trees to be removed trees (ART) in the environmental impact assessment is an environmental indicator used in various parts such as greenhouse gas emissions and waste of forest trees calculation. Until now, the ART has depended on the forest tree density of the vegetation survey, and the uncertainty of estimating the amount of removed trees has increased due to the sampling bias. A full-scale survey can be offered as an alternative to improve the accuracy of ART, but the reality is that it is impossible. As an alternative, there is an individual tree detection using aerial image (ITD), and in this study, we compared the ARTs estimated by full-scale survey, sample survey, and ITD. According to the research results, compared to the result of full-scale survey, the result of ITD was overestimated by 25. While 58 were overestimated by the sample survey (average). However, as the sample survey is an estimate based on random samples, ART will be overestimated or underestimated depending on the number and size of quadrats.

• Journal of the Korean Wood Science and Technology
• /
• v.52 no.2
• /
• pp.118-133
• /
• 2024

The sapwood portion of fast-growing teak is mostly ignored due to its inferior quality. One of the possibilities for utilizing sapwood waste is to convert it into activated carbon that has good adsorption capabilities. The raw materials used in this research were sapwood of 14-year-old fast-growing teak sapwood (FTS) waste, which was taken from three trees from community forests in Wonosari, Gunungkidul, Yogyakarta Special Region. FTS waste was taken from the bottom of the tree up to a height of 1.3 m. The activation process is conducted with an activation temperature of 750℃, 850℃, and 950℃. The heating duration consists of three variations: 30 min, 60 min, and 90 min. The quality evaluation parameters of activated carbon include yield, moisture content, volatile matter content, ash content, fixed carbon content, adsorption capacity of benzene, adsorption capacity of methylene blue, and adsorption capacity of iodine. The results showed that the activated carbon produced had the following quality parameters: yield of 75.61%; moisture content of 1.27%; volatile matter content of 9.98%; ash content of 5.43%; fixed carbon content of 84.58%; benzene absorption capacity of 8.58%; methylene blue absorption capacity of 87.73 mg/g; and iodine adsorption capacity of 948.19 mg/g. It can be concluded that activated carbon from FTS waste has good iodine adsorption, which fulfilled the SNI 06-3730-1995 quality standard. Due to the iodine adsorption ability of FTS waste activated carbon, the conversion of FTS waste to activated carbon is categorized as a potential method to increase the value of this material.

• Journal of the Korean Wood Science and Technology
• /
• v.52 no.5
• /
• pp.488-503
• /
• 2024

Shoot waste refers to the parts of trees that are not yet optimally utilized. In this study, we aimed to utilize shoot waste of fast-growing teak (FGT) extracted from the community forest in Wonosari, Gunungkidul, Yogyakarta Special Region, Indonesia by converting it into charcoal, followed by further conversion into activated carbon. This study was conducted with two treatment factors of the activation process, including thermal treatment (750℃, 850℃, and 950℃) and heating period (30, 60, and 90 min), to determine the best condition for the activation process. Our results indicated a significantly effect of the interaction between thermal treatment and heating period on the moisture content, volatile matter content, ash content, fixed carbon content, and adsorption properties of the produced activated carbon. The highest iodine adsorption capacity of activated carbon is 1,102.57 mg/g, which was produced by thermal treatment at 750℃ and heating period of 30 min. This result fulfilled the Indonesian National Standard (SNI 06-3730-1995 quality standard). Furthermore, the quality parameters of the produced activated carbon include: moisture content of 6.13%; volatile matter content of 17.27%; ash content 5.24%; fixed carbon content of 77.49%; benzene removal efficiency of 8.43%; and methylene blue adsorption capacity of 69.66 mg/g. Based on this study, we concluded that shoot waste of FGT could be classified as a prospective material for developing activated carbon for industrial application.

• 한국방재학회:학술대회논문집
• /
• 2007.02a
• /
• pp.223-230
• /
• 2007

Nowaday, for the promotion of producing forest trees, production of excellent timbers, and build-up of public forest area, it is on the increase of the thinning-forest for artificial forest, natural forest, eco-friendly forest, and the forest for development and improvement of forest resources nationwide. Even though the thinning-forest is applied around 180,000ha every year, the quantity of collected/used products is only 18,000ha $(240,000m^3)$ which is 10% of the whole thinning-forest area. Meanwhile, some reports represent that the left products after thinning-forest might increase the severity of forest fire and the waste of resources. Therefore, this study focused on the analysis of correlation between the accumulated products after thinning-forest and forest fire, and providing a preparation plan for the forest fire.

• Journal of Forest and Environmental Science
• /
• v.29 no.4
• /
• pp.249-256
• /
• 2013

The aim of the study was to reveal the scope and benefits derives from establishing carbon forests in a country like Bangladesh. Carbon forestry is the modernized forestry practice that evolves no cutting of trees or vegetation rather conserves them in the wood. Trees might be the source of carbon sink at large scale by establishing carbon forests. To find out how and in what extent forests of Bangladesh could contribute to global emission reduction, tree species of economic importance were taken into account about their carbon sequestration potential. Data source was a secondary one. Bangladesh has subtropical evergreen and deciduous forest tree species. Here trees can sequester almost 45-55 percent organic carbon in their biomass. On an average, trees in different types of stands can sequester 150-300 tC/ha. Carbon value of these forests might be 7,500-15,000 USD per hactre (assuming 50 USD per equivalent $tCO_2$). Thus, accounting tree carbon credits of total forested lands of Bangladesh, there might be a lump sum value of $1.89{\times}10^{10}-3.79{\times}10^{10}$ USD. If soil carbon is added, this amount would jump. Alternatively, there are two times higher spaces as marginal lands than this for starting carbon forestry. However, carbon forestry concept is still a theoretical conception unless otherwise their challenges are addressed and solved. Despite of this, forests of Bangladesh might be the key showcase for conserving biodiversity in association with carbon capture. Protected areas in Bangladesh are of government wealth, however, degraded and denuded waste and marginal lands might be the best fit for establishing carbon forests.

• Journal of Korean Society of Forest Science
• /
• v.90 no.1
• /
• pp.55-63
• /
• 2001

Populus euramericana and Betula platyphylla var. japonica have been identified as possible species for use for phytoremediation of landfills. To identify the effects of waste leachate on growth and physiological characteristics in Populus euramericana and Betula platyphylla var. japonica, four different treatments were applied to seedlings for 3 months: leachate solution(100% leachate), 50% dilution(50% leachate: 50% water, v/v), 75% dilution(25% leachate: 75% water, v/v) and control(tab water) were applied to these two species. Treatment with waste leachate significantly stimulated both Populus euramericana and Betula platyphylla var. japonica height, diameter at root collar and biomass production relative to the water control. Chlorophyll contents, photosynthesis and transpiration of leachate irrigated-trees were significantly higher than those of water control. These results suggested that these two species could be suitable species for phytoremediation in landfills because these species showed good growth performance and were capable of taking up waste leachate.

• The Korean Journal of Ecology
• /
• v.22 no.6
• /
• pp.343-348
• /
• 1999

Populus euramericana has been identified as a possible species for use for phytoremediation of landfills. To identify the effects of waste leachate on the growth and physiological characteristics of Populus euramericana. four different treatments were applied to Populus euramericana seedlings: leachate solution (100% leachate). 25% dilution (75% leachate: 25% water. v/v), 50% dilution (50% leachate: 50% water. v/v) and control (100% tab water) were applied to Populus euramericana. Treatment with waste leachate significantly stimulated Populus euramericana height. diameter at root collar and biomass production relative to the water control. Chlorophyll contents. photosynthesis and transpiration of leachate irrigated-trees were significantly higher than those of water control. These results suggested that poplar could be a suitable species for phytoremediation in landfills because these species showed good growth performance and were capable of taking up waste leachate.