• 제목/요약/키워드: Waste lime

검색결과 158건 처리시간 0.027초

전기전도도 시험방법을 활용한 산업부산물 포졸란재료의 반응성 평가 (Evaluation on Reactivity of By-Product Pozzolanic Materials Using Electrical Conductivity Measurement)

  • 최익제;김지현;이수용
    • 한국건축시공학회지
    • /
    • 제16권5호
    • /
    • pp.421-428
    • /
    • 2016
  • 본 연구에서는 전기전도도 시험방법을 이용하여 다양한 산업부산물재료의 포졸란 반응성을 평가할 수 있는 대안을 제안하고자 하였다. 실험에 사용된 재료는 일반적으로 포졸란 재료로 활용되고 있는 산업부산물 플라이애시(class F, C) 2종, 실리카퓸(densified, undensified) 2종, 메타카올린과 포졸란 반응성이 정량적으로 증명되지 않은 산업부산물인 벤토나이트, 그라스울, 세라믹을 활용하여 포졸란 반응성을 측정 하였다. 각 재료가 $40^{\circ}C$ 포화수산화칼슘 수용액에 침지된 이후의 전기전도도의 변화를 관찰하였으며, $450{\sim}500^{\circ}C$에서 관찰된 수산화칼슘의 분해량을 통해 포졸란 반응성을 교차 검증하였다. 28일 압축강도 또한 포졸란 반응에 의한 역학적 성능의 개선여부를 검증하기 위해 활용되었다. 실험결과에 따르면, 전기전도도 최대값과 4시간후의 전기전도도의 차이를 활용하여 포졸란 반응성을 평가하는 것이 적절하다고 나타났다. 이러한 방법을 활용할 경우 수산화칼슘 함유량에 근거한 포졸란 반응성 평가와 매우 유사한 결과를 얻을 수 있었으며, 28일 압축강도 측정을 통해 얻은 결과와도 큰 차이를 보이지 않아, 전기전도도 시험법이 포졸란 반응성이 증명되지 않은 재료의 포졸란 반응성평가에도 충분히 활용될 수 있는 것으로 나타났다.

폐기물 매립지 침출수에 의한 중금속 용출에 관한 연구 (A Study on the Leaching of Heavy Metals by Municipal Solid Waste Landfill Leachate)

  • 정종관;장원;박영숙
    • 환경영향평가
    • /
    • 제6권1호
    • /
    • pp.105-110
    • /
    • 1997
  • Sanitary landfill is a general method as a final disposal of municipal solid waste(MSW), therefore leachate characteristics are very various as lime goes by because of highly concentrated organic acids are contained non biodegradable COD. So it is hard to abide by the mandatory standards of discharge eventhough applying the physicochemical and biological processes to treat the leachate. The process of treating leachate are determined by the degree of removal and components, but they are highly contained organic materials. It is a removal method to use jointly with the physicochemical process if the hard and fast rule is needed. The critical components of material are COD, ammonia, salts and heavy metals in the case of treating biologically. Biological process is to use metabolism of microorganism, therefore it is a desirable condition which heavy metals are not contained, because they acting as an inhibitor of enzyme. Of these are contained, organic decomposition and synthetic function of microorganisms decrease significantly. Consequently, this research paper lays emphasis on the concentration of heavy metals in leachate and for the purpose of forecasting the factors which are affecting the leaching of metalic waste in some degree, experimented the various reacting conditions. 1. When the concentration of heavy metals in leachate is in comparison with the level eluted after reaction, at pH 7.9 the result of reaction for PCB to CCL scrap showed that Zn, Mn, Cu was more eluted 11.6 times, 340.3 times, and 2,705.5 times respectively than the leachate undiluted solution. 2. At the condition of strong acid pH 4.7, the concentration of heavy metals in EM undiluted solution showed that Zn, Mn, Cu was more eluted 26.5 times, 147.3 times, and 3,656.3 times respectively than leachate undiluted solution. 3. When the ratio leachate to EM was 50 vs 50(V/V%), Mn was more eluted 198.7 times than leachate undiluted solution, but Zn and Cu do not show the meaningful results. 4. The color of landfill leachate was black-brown. And fulvic acid that is main ingredient of NBD COD contained, oxygen of 44~50%. For that reason, I estimated that the level of Zn, Mn, Cu was higher than the case of leachate. 5. COD of leachate from general landfill is difficult to remove. Because the solution of heavy metals is improved by the character of leachate(pH & ingredient of oxygen etc.) hence the Mn, Cu, Zn act as disturbing factor, the biochemical treatment is hard. Therefore the type of PCB & CCL scrap, iron, aluminum contained metals need to previously separate from general wastes as much as possible.

  • PDF

농산폐자원의 미생물학적 이용에 관한 연구 (제육보) 섬유소단세포단백 생산에서의 천연기질의 이용성 (Studies on Microbial Utilization of Agricultural Wastes (Part IV) Cellulosic Waste Materials as Substrate on the Production of Cellulosic Single Cell Protein.)

  • 배무;고영희
    • 한국미생물·생명공학회지
    • /
    • 제5권1호
    • /
    • pp.18-23
    • /
    • 1977
  • 섬유소자화세균 Cellulomonas flavigena KIST 321로 섬유소 단세포 단백을 생산하기 위하여 우리주변에서 제기되고 있는 각종 섬유소폐기물을 수집하여 기질로서의 사용 가능성을 검토하였는 바 그 결과를 요약하면 다음과 같다. 1. 당유를 유일한 탄소원으로 하였을 때 cellulose와 rylose에서 균체량이 가장 많았다. 2. 폐지유와 폐의유를 기질로 하였을 때 알카리 전처리를 함으로써 알카리 전처리하지 않았을 때보다 균체량이 많았으며, 폐신문지와 같은 인쇄물에서는 균체량이 적었다. 3. 짚류(straws)를 기질로 하였을 때는 대체로 균체수율이 높았으며, 볏짚, 채종대, 피를 기질로 하였을 때 균체량이 많았다. 4. 목재유의 톱밥에서는 균체량이 적었으나 잎류(leaves)에서는 비교적 많았다. 5. 기질의 종류에 따라 전처리시 NaOH농도를 다르게 하여 균체생산량을 조사하였다. NaOH 농도는 기질의 종류에 따라 최적농도가 달랐으나 짚류(Straws)에서는 0.8∼1.0% 일때가 좋았고, 잎류(leaves)에서는 0.4∼0.6%일때가 좋았다. 6. 각종기질을 알카리 처리후 세척하여 기질로 사용하였을 때 볏짚에서는 균체량이 감소하였으나 소나무 톱밥, 피나무 톱밥, 소나무잎, 폐신문지에서는 증가하였다.

  • PDF

비소성 시멘트 콘크리트의 휨 거동에 관한 연구 (A Study on the Flexural Behavior of Concrete Using Non-burnt Cement)

  • 유성원;남은용;이상준;황선복;소양섭;김재신
    • 한국안전학회지
    • /
    • 제27권2호
    • /
    • pp.49-56
    • /
    • 2012
  • If cement can be manufactured with industrial byproducts such as granulated blast furnace slag, phosphogypsum, and waste lime instead of clinker, there would be many advantages, including maximum use of these industrial byproducts for high value-added resources, conservation of natural resources and energy by omitting the use of clinker, minimized environmental pollution problems caused by CO2 discharge, and reduction of the production cost. By this reason, in this study, mechanical behavior tests of non-burnt cement concrete were performed, and elasticity modulus and stress-strain relationship of non-burnt cement concrete were proposed. 6 test members were manufactured and tested according to reinforcement ratio and concrete compressive strength. By the test results, there was no difference between ordinary concrete and non-burnt cement concrete of flexural behavior. In order to verify the proposed non-burnt cement concrete model, nonlinear analytical model was derived by using strain compatibility method. By the results of comparison between test results, ordinary concrete model and proposed model, The proposed model well predicted the flexural behavior of non-burnt cement concrete.

Sizing Efficiency of AKD in Causticizing Calcium Carbonate Filled Paper

  • Wang, Jian;Liu, Ling;Xu, Yong-Jian
    • 펄프종이기술
    • /
    • 제46권2호
    • /
    • pp.1-7
    • /
    • 2014
  • Causticizing calcium carbonate (CCC) is produced as a by-product in the causticization step of the kraft pulping process. It is often calcined in a rotary lime kiln after being dewatered and reused in the causticizing process. But for the China mill, the conventional recycled way is difficult because the CCC is mainly obtained from non-wood pulping materials, which higher silicon content led to serious silicon obstacle. So it is often discarded as solid waste or used in landfill after dewatering and secondary pollution is brought. In order to prevent its secondary pollution, recent years, the CCC is used as a filler in China papermaking industry. In mill trials, the CCC can be used to replace an amount of precipitated calcium carbonate (PCC). Unfortunately, the application scope and dosage of CCC have been limited due to its lower sizing efficiency than PCC. In this study, the reason for the lower sizing efficiency of alkyl ketene dimer (AKD) when CCC was used as a filler was investigated. The results showed that the materials in green liquid, such as insoluble matter in green liquid, silicon and metal ions, were a little influence on the sizing efficiency of AKD. The higher BET and BJH pore volume of the CCC were the main reason for lower sizing efficiency of AKD when it was used as filler.

비소성 시멘트 콘크리트의 역학적 거동에 대한 실험 연구 (An Experimental Study on the Mechanical Behavior of Concrete Using Non-Sintered Cement)

  • 유성원;민경완
    • 한국건축시공학회지
    • /
    • 제12권1호
    • /
    • pp.115-121
    • /
    • 2012
  • 클링커 대신 고로슬래그, 폐인산석고, 폐석회 등의 산업 부산물을 이용하여 비소성시멘트를 제조하면 산업부산물 재활용, 클링커 제조를 위한 에너지 감소, $CO_2$저감으로 인한 환경오염문제 및 생산원가 저감 등의 장점이 있다. 이러한 이유로 본 연구에서는 비소성 시멘트 콘크리트의 역학적 거동실험을 수행하여 비소성 시멘트 콘크리트의 탄성계수, 응력-변형률 관계를 제안하였다. 또한 철근비, 압축강도를 변수로 9개의 구조 시험체를 제작하였으며, 그 실험 결과 비소성 시멘트 콘크리트의 휨 및 전단 거동 경향은 일반 콘크리트 부재와 크게 차이나지 않는 것으로 나타났다.

Lead Stabilization in Soil Amended with Lime Waste: An Extended X-ray Absorption Fine Structure (EXAFS) Investigation

  • Lim, Jung Eun;Lee, Sang Soo;Yang, Jae E.;Ok, Yong Sik
    • 한국토양비료학회지
    • /
    • 제47권6호
    • /
    • pp.443-450
    • /
    • 2014
  • To determine Pb species in soils following the immobilization process, sequential extraction has been used despite the possibility of overestimating Pb species from unintended reactions during chemical extraction. Meanwhile, the application of extended X-ray absorption fine structure (EXAFS) has been shown to provide a more precise result than chemical extraction. In this study, the immobilization of Pb in contaminated soils treated with liming materials such as oyster shell (OS) or eggshell (ES) was evaluated with thermodynamic modelling and EXAFS analysis. Thermodynamic modelling by visual MINTEQ predicted the precipitation of $Pb(OH)_2$ in OS and ES treated soils. In particular, the values of saturation index (SI) for $Pb(OH)_2$ in OS (SI=0.286) and ES (SI=0.453) treated soils were greater than in the control soil (SI=0.281). Linear combination fitting (LCF) analysis confirmed the presence of $C_{12}H_{10}O_{14}Pb_3$ (lead citrate, 44.7%) by citric acid from plant root, Pb-gibbsite (Pb adsorbed gibbsite, 26.4%), and Pb-kaolinite (Pb adsorbed kaolinite, 20.3%) in the control soil. On the other hand, $Pb(OH)_2$ (16.8%), Pb-gibbsite (39.3%), and Pb-kaolinite (25.6%) were observed in the OS treated soil and $Pb(OH)_2$ (55.2%) and Pb-gibbsite (33.8%) were also confirmed in the ES treated soil. Our results indicate that the treatment with OS and ES immobilizes Pb by adsorption of Pb onto the soil minerals as a result of the increase in soil negative charge and the formation of stable $Pb(OH)_2$ under high pH condition of soils.

산성 및 유기성 가스의 동시제거를 위한 준건식 세정시스템의 적정 운전 조건 (Optimal Operation Condition of Spray Drying Sorber for Simultaneous Removal of Acidic and Organic Gaseous Pollutants)

  • 백경렬;구자공
    • 한국환경과학회지
    • /
    • 제10권1호
    • /
    • pp.59-64
    • /
    • 2001
  • The effect of major operating parameters in spray drying sorber(=SDS) for automatic control for the simultaneous removal of acidic and organic gaseous pollutants from solid waste incinerator was performed. The field experiment was carried out in pilot scale test for the quantification of major operating parameters of hydrophilic and the hydrophobic pollutants. The removal efficiencies of $SO_2$and HCI in the 5wt% slurry condition were being increased with the increase of the stoichiometric ration which is the molecular ratio of lime to the pollutant concentration, and with the decrease of inflow flue gas temperature in the pilot SDS reactor. The removal efficiency along the height of spray drying sorber was closely related to the temperature profile, and more than 90% of total removal efficiency was achieved in an absorption region. For the removal of acidic gas the optimum operating condition considering the economics and a stable operation is the 5wt% of slurry concentration, 1.2 of stoichiometric ratio and 25$0^{\circ}C$ of inflow flue gas temperature. For the organic gases of benzene and toluene the removal efficiencies were 20-60% which is much lower than that of acidic gas. The best removal efficiency was obtained at 1.5 of stoichiometric ratio and 25$0^{\circ}C$ of inflow flue gas temperature. The organic\`s removal efficiency along the height of spray drying sorber was quite different from that of acidic gas, that is, more than 60% of the total removal efficiency for benzene and 90% of the total removal for toluene were achieved in the dried adsorption region, which was formed at the lower or exit part of the reactor.

  • PDF

매립지 차수재의 무기화합물에 대한 이류-확산 특성 (Advective-diffusive Characteristics of Waste Landfill Liner to Inorganic Chemicals)

  • 장연수;류정훈;류정훈
    • 한국지반공학회논문집
    • /
    • 제20권3호
    • /
    • pp.5-11
    • /
    • 2004
  • 본 논문에서는 이류를 고려한 확산 실험을 통해 매립지 차수층을 이루는 점토와 실리카계와 석회계 두 종류의 고화재(PA, PB)에서의 무기물 이동특성을 알아보고 이를 순수확산 실험결과와 비교하였다. 점토와 고화층(PA, PB)에 대한 이류를 고려한 확산실험 결과 평균분산계수는 각각 $4.39\times l0^{-10}\textrm{m}^2 /s,\; 1.98\times l0^{-10}\textrm{m}^2 /s,\; 1.99\times l0^{-10}\textrm{m}^2 /s$ 로 나타나 고화층이 점토보다 높은 것으로 나타났다. 이류확산 실험 결과와 순수확산 실험결과를 비교 분석결과 이류를 고려한 경우 각각의 무기물에 대한 음이온인 염소이온의 분산계수의 값은 두 시험 결과 사이에 큰 차이를 나타내지 않았으나 범위는 이류를 고려한 경우가 순수확산의 경우 보다 적은 것으로 나타났다.

전산유체역학을 이용한 반건식 반응기의 운전조건에 따른 산성가스제거효율에 관한연구 (A study of the removal efficiency of acidic gas at various operating conditions using Computation Fluid Dynamics)

  • 이건주
    • 유기물자원화
    • /
    • 제19권1호
    • /
    • pp.93-101
    • /
    • 2011
  • 본 연구는 소각 시스템에 적용되는 반건식 반응기의 모델링 연구를 수행 하였다. 전산유체역학(CFD)을 이용하여 반건식 반응기에서 속도분포 온도분포를 조사하여 반응기의 최적 운전 조건을 조사하였다. 본 모델에 사용된 반응기의 직경은 3 m 이며 높이는 9 m 이다. 반응기로 유입되는 연소가스의 양은 $6,125Nm^3/hr$ 이며 반응기 유입 가스의 온도는 493K 이다. 반응기에 유입되는 소석회 양은 151 kg/hr 이다. 반응기의 입구 형상이 변하면 반응기 내의 온도가 변하며 반응기 내의 가스속도는 0.48 m/sec 에서 1.17m/sec 였으며, 반응기 출구의 가스속도는 6.9에서 7.42m/sec 였다. 모델링 결과에 의하면 반응기 내의 평균 가스 속도와 출구에서의 평균가스 속도는 각각 0.489 m/sec와 7.424 m/sec 였으며, 반응기 출구 온도는 448 K 였다.