• 대한기계학회논문집B
• /
• 제21권2호
• /
• pp.264-274
• /
• 1997

A numerical analysis on condensation and coagulation of the metallic species with fly ash particles pre-existing in an incinerator was performed. Waste was simplified as a mixture of methane, chlorine, and small amounts of Pb and Sn. Vapor-phase amounts of Pb- and Sn -compounds were first calculated assuming a thermodynamic equilibrium state. Then theories on vapor-to-particle conversion, vapor condensation onto the fly ash particles, and particle-particle interaction were examined and incorporated into equations of aerosol dynamics and vapor continuity. It was assumed that the particles followed a log-normal size distribution and thus a moment model was developed in order to predict the particle concentration and the particle size distribution simultaneously. Distributions of metallic vapor concentration (or vapor pressure) were also obtained. Temperature drop rate of combustion gas, fly ash concentration and its size were selected as parameters influencing the discharged amount of metallic species. In general, the coagulation between the newly formed metal particles and the fly ash particles was much greater than that between the metal particles themselves or between the fly ash particles themselves. It was also found that the amount of metallic species discharged into the atmosphere was increased due to coagulation. While most of PbO vapors produced from the combustion were eliminated due to combined effect of condensation and coagulation, the highly volatile species, PbCl$_{2}$ and SnCl$_{4}$ vapors tended to discharge into the atmosphere without experiencing either the condensation or the coagulation. For Sn vapors the tendency was between that of PbO vapors and that of PbCl$_{2}$ or SnCl$_{4}$. To restrain the discharged amount of hazardous metallic species, the coagulation should be restrained, the number concentration and the size of pre-existing fly ash particles should be increased, and the temperature drop rate of combustion gas should be kept low.

• 한국결정성장학회지
• /
• 제24권1호
• /
• pp.15-20
• /
• 2014

본 연구에서는 도시 쓰레기 소각재 슬래그에 알칼리 활성화제로서 NaOH를 첨가하여 지오폴리머를 합성하고 그 물성을 평가하였다. 특히 NaOH의 몰농도, 원료의 입도 그리고 액체/고체 비율이 제조된 지오폴리머의 압축강도에 미치는 영향을 조사하였다. 원료의 입도가 미세할수록 합성된 지오폴리머의 강도는 증가하였으며, 액체/고체 비율의 최적 값은 0.13으로 나타났다. 합성된 지오폴리머의 압축강도는 첨가된 NaOH의 몰농도가 증가함에 따라 함께 증가하는 경향을 나타내었으나, 20 M 이상의 농도에서는 일정 값에 수렴하였다. 20 M 이상의 NaOH 농도로 제조된 지오폴리머에는 sodium aluminum silicate 및 sodium aluminum silicate hydrate 형태의 2종류 zeolite 결정상이 생성되었다. 20 M NaOH 및 $70^{\circ}C$ 양생조건으로 제조된 시편에서 가장 높은 압축강도, 163 MPa이 발현되었으며, 이것은 고농도의 NaOH가 지오폴리머 반응 및 치밀한 미세구조 형성을 촉진시켰기 때문인 것으로 사료된다. 본 연구에서 제조된 고강도의 지오폴리머는 향후, 도시쓰레기 소각재 슬래그의 재활용율 제고는 물론 시멘트 대체 분야 발전에 일조할 것으로 기대된다.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 2008년도 춘계학술 발표회
• /
• pp.277-280
• /
• 2008

• 한국자원리싸이클링학회:학술대회논문집
• /
• 한국자원리싸이클링학회 2005년도 춘계임시총회 및 제25회 학술발표대회
• /
• pp.242-245
• /
• 2005

• 유기물자원화
• /
• 제24권3호
• /
• pp.45-52
• /
• 2016

본 연구에서는 I시 위치한 3개 도서에 대한 유기성폐기물의 성상분석 및 바이오가스 발생량을 예측하였다. 3개 도서지역의 대표 지점에서 채취한 유기성 폐기물 시료에 대하여 pH, BOD, COD, 삼성분(수분, 회분, 가연분)등의 총 6가지 항목들에 대한 성상분석을 실시하였다. 3개 도서지역의 성상검토결과를 토대로, COD값에 대한 총 메탄생성량 계산결과 연평균 $1,750,000m^3$이상의 메탄가스가 생성되는 것을 확인할 수 있었다. 따라서, 도서지역 내 유기성 폐기물을 소각 등의 처리 시설이 아닌 바이오가스 생산시설로의 전환이 이루어진다면 유기성폐기물의 효율적 활용이 가능할 것으로 판단된다.

• Environmental Engineering Research
• /
• 제21권1호
• /
• pp.15-21
• /
• 2016

Magnesium potassium phosphate cement (MKPC) is an effective agent for solidification/stabilization (S/S) technology. To further explore the mechanism of the S/S by MKPC, two kinds of Cd including $Cd(NO_3)_2$ solution (L-Cd) and municipal solid waste incineration fly ash (MSWI FA) adsorbed Cd (S-Cd), were used to compare the effects of the form of heavy metal on S/S. The results showed that all the MKPC pastes had a high unconfined compressive strength (UCS) above 11 MPa. For L-Cd pastes, Cd leaching concentration increased with the increase of Cd content, and decreased with the increase of curing time. With the percentage of MSWI FA below 20%, S-Cd pastes exhibited similar Cd leaching concentrations as those of L-Cd pastes, while when the content of MSWI FA come up to 30%, the Cd leaching concentration increased significantly. To meet the standard GB5085.3-2007, the highest addition of S-Cd was 30% MSWI FA (6% Cd contained), with the Cd leaching concentration of 0.817 mg/L. The S/S of L-Cd is mainly due to chemical fixation, and the hydration compound of Cd was $NaCdPO_4$, while the S/S of S-Cd is due to physical encapsulation, which is dependent on the pore/crack size and porosity of the MKPC pastes.

• 에너지공학
• /
• 제26권1호
• /
• pp.54-61
• /
• 2017

In general, solid waste arises from lots of human activities such as domestic, agricultural, industrial, commercial, waste water treatment, construction, and mining activities etc. If the waste is not properly disposal and treated, it will have a negative impact to the environment, and hygienic conditions in urban areas and pollute the air with greenhouse gases (GHG), ground water, as well as the soil and crops. In this paper, the Carbon Resources Recycling Appropriate Technology Center feasibility studies are reported at Bantayan Island, Philippines on the municipal solid waste management. The present objective of our study is to characterize the municipal solid waste incineration (MSWI) bottom ash and case study of MSWI production status in Bantayan, Philippines. Currently, wide variety of smart technologies available for MSWI management in developed countries. Recycling is the other major alternative process for MSWI landfill issues. In this paper, the feasibility studies of applied appropriate technologies for the municipal solid waste generation in Bantayan Island, Philippines are reported.

• 자원리싸이클링
• /
• 제19권5호
• /
• pp.68-74
• /
• 2010

본 연구에서는 생활폐기물 소각 비산재를 활용하여 유리화 온도보다 낮은 소결 온도에서 calcium chloroaluminte($11CaO{\cdot}7Al_2O_3{\cdot}CaCl_2$, 본문에서는 CCA로 표기)의 시멘트 광물을 합성하였다. CCA를 합성 시 $Al_2O_3$ 성분 부족한 양은 정수 슬러지를 부 원료로 첨가하였다. 생활폐기물 소각 비산재의 CaO 성분과 정수 슬러지를 10:7로 혼합하여 $900^{\circ}C-1300^{\circ}C$ 소결 온도에 따른 CCA 합성 거동을 관찰하였다. 혼합 시료는 개방형(Opened System) 소결 조건 전기로와 밀폐형(Closed System) 소결 조건 전기로에서 온도에 따른 CCA 합성 거동을 관찰한 결과, CCA 합성은 개방형과 밀폐형 모두 $1,000^{\circ}C$에서 합성이 되었다. 그러나 소성 분위기로 볼 때 개방형보다는 밀폐형의 소성 조건에서 CCA의 합성율이 높았으며, 이는 소각재 소성 과정에서 Cl의 휘발 거동에 따라 CCA의 합성율 및 분해 온도가 결정되는 것으로 나타났다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.222-222
• /
• 2011

Plastic product is increasing by the growth of its demand and most of refused plastics are incinerated or reclaimed. However, the refused plastic is not easily decomposed and has the environmental problem with its various toxic gas in case of incineration. Therefore, many countries such as USA, Japan, Germany and other developed industrial countries as well as Korea are interested in studying the recyclable resource of refused plastic. The macromolecular waste pyrolysis has the advantage of collecting of raw materials in high price and can at least get fuel gas or oil with high heat capacity. It also discharges low waste gas and low toxic gas including SOx, NOx and HCl heavy metals. However, pyrolyzed oil includes enough excess unsaturated hydrocarbons to form tar, which can cause the nozzle of engines to plug when pyrolyzed oil is used as fuel. Activated carbon was proven to have prominent adsorption capability among the other adsorbents that were mainly composed of carbon. This study examined the possibility of application in activated charcoal of its solid formation by analysing the feature of pyrolysis which is one of the chemical recycling methods and getting chemical analysis of the product and activated energy. Analyze the element of the oil produced by pyrolysis using GC-MS. The experiment of tar adsorption using fly-ash showed that fly-ash improved the optical intensity of pyrolyzed oil and decreased oxygen compounds in the pyrolyzed oil.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 추계 학술논문 발표대회
• /
• pp.196-197
• /
• 2013

This study is the experiment for manufacturing the Lightweight non-cement matrix based on the Blast furnace slag. And, the matrix was manufactured matrix by generating the bubble just by the reaction of KOH that is the alkali accelerator and paper ash, instead of the general foaming agent, that is the waste managed of incineration the pulp sludge generated in the process of manufacturing the paper. Consequently, the density according to the addition rate of KOH represented the tendency to increase. And it showed up that density of the matrix adding KOH 22.5% was the lowest. As to the strength test result, strength following addition rate of KOH increased. Since the bubble is generated in the reaction of KOH and paper ash, this shows the very low intensity but it is determined to be the result that the amount of vacant space is decreased because the bubble generated in the mixture process comes up as the specific gravity difference.