• 한국건축시공학회지
• /
• 제4권3호
• /
• pp.143-151
• /
• 2004

The purpose of this study is development of technique to use cementitious powder as recycle cement produced from deteriorated Concrete waste which has a large quantity of calcium carbonate. Therefore, after having theoretical consideration based on the properties of high-heated concrete and concerning about neutralization of Concrete, we analysis chemical properties of ingredients of cementitious powder. After making origin cement paste, then processing the accelarated carbonation, we consider the properties of hydration and chemical properties of cementitious powder under various temperature conditions. As a result of the thermal analysis, the $CaCO_3$ content of cementitious powder would affect decision of heat temperature to recover its hydrated ability because $CaCO_3$ content is increased when neutralization is progressed. And as a result of XRD analysis, in case of origin powder of non-neutralized paste, CaO peak is found at $700^{\circ}C$. but, heat temperature to generate CaO would increase when the content of neutralized ingredients is increased. Finally, recycle cement heated at $700^{\circ}C$ 120min. shows the best compressive strength when the content of neutralized ingredients in recycle cement is less then 50%.

• 대한화학회지
• /
• 제63권6호
• /
• pp.440-445
• /
• 2019

본 연구는 자동차 폐리튬 이차전지의 모듈로부터 재생할 수 있는 자원을 효율적으로 회수하는 방법을 개발하는 것이다. 모듈의 셀은 구리 박막, 알루미늄 박막, 그리고 이들 사이는 폴리머 재질의 격막으로 이루어져 있다. 셀은 특별히 제작한 글러브 상자 안에서 그리고 여러 번의 단계를 거쳐 손상 없이 완전히 해체 하였다. 우선적으로 양극활물질은 400 ℃에서 열처리하여 알루미늄 박막으로부터 분리하였다. 그런 후 분리된 양극활물질은 잔류되어 있는 탄소 성분을 제거하기 위해 800 ℃에서의 소성 후에 최종적으로 높은 순도로 회수되었다. 본 연구 결과를 바탕으로 해서, 알루미늄 박막으로부터 양극활물질을 구성하고 있는 코발트(Co), 니켈(Ni), 망간(Mn), 리튬(Li)과 같은 희유금속들을 80% 이상 회수할 수 있었다.

• Journal of Biosystems Engineering
• /
• 제25권3호
• /
• pp.221-226
• /
• 2000

Hot air heater with light oil burner is the most common heater for greenhouse heating in the winter season in Korea. However, since the thermal efficiency of the heater is about 80∼85%, considerable unused heat amount in the form of exhaust gas heat discharges to atmosphere. In order to capture this exhaust heat a heat recovery system for plant bed heating in the greenhouse was built and tested in the hot air heating system of greenhouse. The heat recovery system is made for plant bed or soil heating in the greenhouse. The system consisted of a heat exchanger made of copper pipes, ${\Phi}12.7{\times}0.7t$ located in the rectangular column of $330{\times}330{\times}900mm$, a water circulation pump, circulation plastic pipe and a water tank. The total heat exchanger area is 1.5$m^2$, calculated considering the heat exchange amount between flue gas and water circulated in the copper pipes. The system was attached to the exhaust gas path. The heat recovery system was designed as to even recapture the latent heat of flue gas when exposing to low temperature water in the heat exchanger. According to the performance test it could recover 45,200 to 51,000kJ/hr depending on the water circulation rates of 330 to $690\ell$/hr from the waste heat discharged. The exhaust gas temperature left the heat exchanger dropped to $100^{\circ}C$ from $270^{\circ}C$ by the heat exchange between the water and the flue gas, while water gained the difference and temperature increased to $38^{\circ}C$ from $21^{\circ}C$ at the water flow rate of $690\ell$/hr. By the feasibility test conducted in the greenhouse, the system did not encounter any difficulty in operations. And, the system could recover 220,235kJ of exhaust gas heat in a day, which is equivalent of 34% of the fuel consumption by the water boiler for plant bed heating of 0.2ha in the greenhouse.

• 한국기계가공학회지
• /
• 제13권4호
• /
• pp.36-43
• /
• 2014

Recently, research has been conducted to develop the ORC (organic Rankine cycle), to recover waste heat from facilities such as industrial plants ultimately to create mechanical or electrical energy. The ORC system consists of a heat exchange, a condenser, a pump and a boiler. In this paper, 84 flow analyses were conducted with 21 cases and three variables, i.e., a number of large wings, a number of small wings, and RPMs. R245fa was used as a refrigerant. The flow cavitation phenomenon was investigated through a flow analysis, and a flow stream analysis was conducted.

• 대한기계학회논문집B
• /
• 제40권2호
• /
• pp.69-73
• /
• 2016

최근 자동차 엔지니어들은 자동차 엔진의 열효율을 향상시키기 위한 수단으로 폐열 회수 기술에 많은 관심을 기울이고 있다. 배기량이 큰 가솔린 엔진은 대체로 V형인데, 열 회수를 위해 두 개의 슈퍼히터를 각각의 배기 다기관 가까이에 설치하는 것은 비용 면에서 효율적이지 않다. 하나의 슈퍼히터를 한쪽 배기 다기관에 최대한 가깝게 부착하면 좀 더 높은 열교환 효율을 얻을 수 있으나 폐열회수를 위한 배기가스의 유량은 절반이 된다. 반면에, 배기가스의 유량을 전부 이용하기 위하여 두 배기관이 합류된 지점에 슈퍼히터를 설치하면 배기가스의 온도는 많이 감소된다. 이 사실을 바탕으로 슈퍼히터의 최적 위치를 조사하기 위하여 상용프로그램인 AMESim을 이용해 해석을 수행하였다. 이 때, 배기가스 유량 중 절반만을 사용하더라도 슈퍼히터를 배기 다기관과 최대한 가까이 부착하는 것이 엔진의 배기가스로부터 3.8 kW의 열을 더 회수할 수 있는 것으로 나타났다. 이 결과를 바탕으로 최적의 폐열 회수 모델을 도출하고 제안하였다.

• 대한토목학회논문집
• /
• 제13권1호
• /
• pp.213-220
• /
• 1993

본 논문에서는 해마다 수 십만 개씩 발생되는 폐타이어의 열적 처리 방법인 건류 소각 처리 방법에서 발생되는 이차 오염 물질을 정량하여 폐타이어의 안전한 최종 처리 방법까지 고찰하였다. 건류-소각처리 방법에서 발생되는 배기 가스에서 이차 독성 오염 물질을 화학 평형 모델을 응용하여 예측하였고 실질적인 잔류 물질인 건류재와 소각재에서 유기성 독성 물질과 중금속을 정량하였다. 건류재에서는 폐타이어의 불완전 연소에 따른 유기성 이차 오염 물질이 다량 포함되어 있는 반면에 소각재에서는 납과 카드뮴과 같은 중금속 화합물의 함량이 높았다. 건류재 및 소각재의 안전한 최종 매립을 위하여는 서로 다른 전처리 방법이 요구된다.

• 한국분말재료학회지
• /
• 제30권6호
• /
• pp.502-508
• /
• 2023

With the increasing demand for electronic products, the amount of multilayer ceramic capacitor (MLCC) waste has also increased. Recycling technology has recently gained attention because it can simultaneously address raw material supply and waste disposal issues. However, research on recovering valuable metals from MLCCs and converting the recovered metals into high-value-added materials remains insufficient. Herein, we describe an electrospinning (E-spinning) process to recover nickel from MLCCs and modulate the morphology of the recovered nickel oxide particles. The nickel oxalate powder was recovered using organic acid leaching and precipitation. Nickel oxide nanoparticles were prepared via heat treatment and ultrasonic milling. A mixture of nickel oxide particles and polyvinylpyrrolidone (PVP) was used as the E-spinning solution. A PVP/NiO nanowire composite was fabricated via E-spinning, and a nickel oxide nanowire with a network structure was manufactured through calcination. The nanowire diameters and morphologies are discussed based on the nickel oxide content in the E-spinning solution.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.III
• /
• pp.639-646
• /
• 2000

Hot air heater with light oil combustion is the most common heater for greenhouse heating in the winter season in Korea. However, since the heat efficiency of the heater is about 80%, considerable unused heat in the form of exhaust gas heat discharges to atmosphere. In order to capture this exhaust gas heat a heat recovery system for plant bed heating in the greenhouse was built and tested in the hot air heating system of greenhouse. The system consists of a heat exchanger made of copper pipes, ${\phi}\;12.7{\times}0.7t$ located inside the rectangular column of $330{\times}330{\times}900mm$, a water circulation pump, circulation plastic pipe and a water tame The total heat exchanger area is $1.5m^2$, calculated considering the heat exchange amount between flue gas and water circulated in the copper pipes. The system was attached to the exhaust gas path. The heat recovery system was designed as to even recapture the latent heat of flue gas when exposing to low temperature water in the heat exchanger. According to performance test it can recover 45,200 to 51,000kJ/hr depending on the water circulation rates of 330 to $690{\ell}$/hr from the waste heat discharged. The exhaust gas temperature left from the heat exchanger dropped to $100^{circ}C$ from $270^{circ}C$ by the heat exchange between the water and the flue gas, while water gained the difference and temperature increased to $38^{circ}C$ from $21^{circ}C$ at the water flow rate of $690{\ell}$/hr. And, the condensed water amount varies from 16 to $43m{\ell}$ at the same water circulation rates. This condensing heat recovery system can reduce boiler fuel consumption amount in a day by 34% according to the feasibility study of the actual mimitomato greenhouse. No combustion load was observed in the hot air heater.

• 공업화학
• /
• 제34권3호
• /
• pp.307-312
• /
• 2023

본 연구는 수소 경제 사회의 안전 확보를 위해 수소 연료전지 후단 배출된 미반응 수소를 안정적으로 산화하는 방안에 대해 논의하였다. 안전 시스템은 미반응 수소를 에너지원 없이 제거할 수 있는 상온 산화촉매를 충진하였으며, 이때 반응으로 배출되는 산화열은 안정적으로 회수할 수 있는 열 회수 장치를 연계하고자 하였다. 그 결과, 수소 산화 시스템의 충진 조건에 따라 시스템 내 압력 및 유체 흐름이 변화함을 CFD 분석을 통해 확인하였다. 또한 배가스 온도, 열 회수기 내 유량 및 압력조건을 최적화하여 300 ℃ 이상의 배가스 산화 열원을 40 ℃ 이상의 온수를 확보하는 방식으로 폐열을 회수할 수 있음을 확인하였다. 본 연구를 통해 수소 연료전지와 같은 중·소규모 사업장에 적용된 수소 활용 공정을 실증 규모로 평가하여 안전 시스템으로의 가능성을 확인하였다. 추후 실증화 연구를 통해 예측하지 못한 수소 안전사고에 대해 대응할 수 있는 안전 가이드로 활용될 수 있다고 판단된다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.281-285
• /
• 2008

Effective use of available energy sources is of general concern along with the issues of global warming and unstable oil price. As one of the effort to recover waste heat from industrial facilities effectively, researchers have interest in a technology called organic Rankine cycle(ORC), in which the working fluid is some organic liquid instead of water. Known to have poor efficiency already, this old technology is considered to give an innovative solution to utilizing low grade energy sources, by improving the efficiency. Nano fluidics, coatings and the use of additives are the examples of these efforts. In the present study, we present simulated performance of a horizontal tube type condenser geometry. N-hexanr and isopentane are compared to water vapor case under 1 atm and the inet cooling water temperature of $20^{\circ}C$. EES(Engineering Equations Solver) is used for the present work.