• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.2123-2125
• /
• 2005

Ultra wide band electromagnetic energy can be transmitted to a far field by emitting the nanoseconds high voltage Pulse electromagnetic energy via an antenna. This UWB EM energy is expected to be used in post-packing pasteurization of food, detection of buried objects or underground water veins and caves and the treatment of waste water or polluted gas. The nanoseconds pulse forming for UWB generation using 500kV blumlein line and an ultrafast switch is mentioned.

• Nuclear Engineering and Technology
• /
• 제51권2호
• /
• pp.641-645
• /
• 2019

Experimental equipment for studying the sorption properties of iodine sorbents using radioactive methyliodide has been developed. The sorption capacity index ${\alpha}$ is proposed as a criterion parameter for assessing the quality of impregnated activated charcoals. It was found that this parameter does not depend on the dynamic conditions during the sorbent test. It was shown that values of the sorption capacity index allow to recommend iodine sorbents for industrial gas cleaning processes.

• 한국건축시공학회지
• /
• 제14권1호
• /
• pp.54-60
• /
• 2014

The purpose of this study is to examine whether cementitious powder separated from waste concrete can be used as an alternative raw material to limestone and reduce the usage of natural resource (limestone) and $CO_2$ emission based on recycling cementitious powder from waste concrete. Experiments actually analyzed the chemical composition of cementitious powder and performed hyperthermia analysis, measurement of free CaO and XRD analysis to measure the degree of recovery of hydration in the model of cementitious powder manufactured based on chemical composition. These were performed in each cementitious powder model at different calcination temperatures such as $900^{\circ}C$, $1200^{\circ}C$, $1300^{\circ}C$, $1400^{\circ}C$ and $1450^{\circ}C$. Through the experiments, it was found that the recovery of hydration was at a level which can be used as the alternative raw material for limestone, but the replacement ratio was directly affected by the degree of mixing of fine aggregate in less than $150{\mu}m$, which cannot be separated from cementitious powder. It was shown that there was no difference in the production of compounds involved in hydration at calcination temperatures of $1200^{\circ}C$ or higher. Therefore, to pursue the replacement of limestone and reduction of greenhouse gas by recycling cementitious powder, the development of technology to efficiently separate aggregate fine powder is required.

• 한국응용과학기술학회지
• /
• 제34권2호
• /
• pp.289-295
• /
• 2017

현 국제해사기구(IMO)에서의 선박엔진에서 발생되는 NOx와 SOx 등의 연소 가스 배출에 대한 규제 강화에 따라, 발트 해 연안을 지나는 모든 선박들은 배출되는 연소가스 저감장치를 장착해야 된다. 국내에서도 IMO의 규제에 따른 NOx와 SOx를 저감장치를 개발하고 있으며, 그중에 대표적인 장치인 Scrubber는 세정액으로 암모니아수와 요소수를 사용하게 되고 사용된 폐 세정액에는 NOx와 SOx와 반응한 질산암모늄과 황산암모늄이 포함되어 있다. 본 연구에서는 폐 세정액이 포함하고 있는 유용한 부산물을 유기용매를 사용하는 염석법을 적용하여 회수하였다. 질산암모늄과 황산암모늄의 회수방법과 질안석회를 추출 후 회수된 부산물의 정성분석을 위하여, FT-IR 분석을 통하여 물질의 정성적 특성과 화학적 조성을 평가해 보았다. 한편 응집제를 투입하여 질안석회를 침전시켜 비료상의 물질로 회수하였다. $FeSO_4$ 응집제와 $CaCl_2$를 응집보조제로 사용하고 입자의 크기를 키우기 위해 $CaCO_3$를 사용하였다.

• 유기물자원화
• /
• 제15권3호
• /
• pp.97-105
• /
• 2007

본 연구는 유기성 고형폐기물 처리에 적합한 벤치스케일 침출상 반응조를 이용하여 효율적인 산발효 및 수소발효의 거동특성을 살펴보았다. 산발효조는 혐기성 소화슬러지를 식종한 후 희석율 2.0, 3.0, $4.0d^{-1}$로 운전이 되었으며, 수소발효조는 열처리된 소화슬러지를 식종한 후 희석율 2.0, 4.0, $6.0d^{-1}$로 운전이 되었다. 산발효조는 희석율 $3.0d^{-1}$에서 운전되었을 때 최대의 COD 전환율 56.2%가 얻어졌으며 이때 전환된 COD는 모두 유기산으로 전환되었다. 반면에 수소발효조는 산발효조보다 높은 COD 전환율(49.3%)을 보여주지 못했지만, 높은 에너지 수율을 가지고 있을 뿐 아니라 친환경 청정에너지인 수소가스(전체 COD 중 5.1%)를 부산물로 얻을 수 있었다. 그러므로 처리목적에 따라 산발효나 수소발효를 유기성 고형폐기물에 적용할 수 있으며, 이는 혐기성처리 기술의 경제성을 향상시킬 수 있다.

• Environmental Engineering Research
• /
• 제14권4호
• /
• pp.212-219
• /
• 2009

Emission characteristics of air pollutants from three commercially operating cement kilns co-burning waste were investigated. The major heavy metals emitted were mercury (Hg), zinc (Zn), nickel (Ni), chromium (Cr), lead (Pb), cadmium (Cd), and arsenic (As) Removal efficiency of the bag filter was above 98.5% for heavy metals (except Hg), and above 60% for Hg. Higher fractions of heavy metals entering the bag filter were speciated to cement kiln dust. On average, 3.3% of the -heavy metals of medium and low toxicity (Pb, Ni, and Cr) entering the bag filter were released into the atmosphere. Among highly toxic heavy metals, 0.14% of Cd, 0.01% of As, and 40% of Hg entering the bag filter were released into the atmosphere. In passing through the bag filter, the proportion of oxidized Hg in all cases increased. Emission variations of hazardous air pollutants in cement kilns tested were related to raw materials, fuel, waste feed and operating conditions. Volatile organic compounds detected in gas emissions were toluene, acrylonitrile benzene, styrene, 1,3-butadiene, and methylene chloride. Although hazardous air pollutants in emissions from cement kilns co-burning waste were within the existing emission limit, efforts are required to minimize their levels.

• 자원리싸이클링
• /
• 제22권2호
• /
• pp.18-21
• /
• 2013

본 실험에서는 상압플라즈마에 의한 목분의 표면개질에 대해 조사하였다. 복합재는 목분과 폴리프로필렌을 이용하여 제작되었다(목분 : 폴리프로필렌=55wt% : 45wt%). 상압플라즈마는 carrier gas로 헬륨과 HMDSO를 모노머로 사용하였고 3 KV, $17{\pm}1$KHz, 2 g/min의 조건에서 처리하였다. 폐목분의 인장강도는 상압플라즈마 처리를 통해 18.5 MPa에서 21.2 MPa로 14.6% 증가하였고 단일수종목분의 경우에도 21.5 MPa에서 23.4 MPa로 8.8% 증가하였다. 이것으로 상압플라즈마 처리는 목분의 표면을 개질하여 폴리프로필렌과의 계면결합력을 증가시켜주는 것을 확인하였다.

• 유기물자원화
• /
• 제20권2호
• /
• pp.15-19
• /
• 2012

폐목재를 자원화하는 방법은 물질재활용과 에너지재활용으로 분류된다. 물질재활용은 폐목재를 원료로 파티클보드 또는 MDF를 생산하는 것 등이 포함되며 분리배출 및 수집을 통해 수차례 재활용이 가능한 장점이 있다. 에너지재활용은 칩을 제조하여 열병합발전 또는 보일러의 원료로 에너지를 생산하는 것을 말한다. 화석연료를 사용하는 발전소, 보일러 등에서 기존의 연료(석유, 화석연료 등)를 폐목재로 대체하면 화석연료 구입비용과 폐목재를 폐기물로서 처리하는 비용을 절감할 수 있다. 본 연구는 폐목재를 원료로 하여 파티클보드 생산공정과 열병합 에너지 생산공정을 전과정평가의 방법으로 지구 온난화에 미치는 영향을 분석하였다. 폐목재 1톤을 사용하여 파티클보드 생산공정은 112kg의 온실가스 를 배출하며, 열병합에너지공정은 382kg의 온실가스를 배출하는 것으로 분석되었으며, 분석조건은 파티클보드의 평균수명 14년과 재활용회수 16회를 가정하였고, 이때 임시적 탄소저장능을 고려하였다.

• 한국재료학회지
• /
• 제15권3호
• /
• pp.177-182
• /
• 2005

Large amounts of the waste SiC sludge containing small amounts of Si and organic lubricant were produced during the wire cutting process of the single silicon crystal ingots. The waste SiC sludge was purified by the washing process and the purified SiC powders were used to fabricate continuously porous $SiC-Si_3N_4$ composites using a fibrous monolithic process, in which carbon, $6wt\%\;Y_2O_3-2\;wt\%\;A1_2O_3$ and ethylene vinyl acetate were added as a pore-forming agent, sintering additives, and binder, respectively. In the burning-out process, carbon was fully removed and continuously porous $SiC-Si_3N_4$ composites were successfully fabricated. The green bodies containing SiC, Si particles and sintering additives were nitrided at $1410^{\circ}C$ in a flowing $N_2+10\%\;H_2$ gas mixture. Continuously porous composites were combined with SiC, ${\alpha}Si_3N_4,\;\beta-Si_3N_4$ and a few $\%$ of Fe phases. The pore size of the 2nd and the 3rd passed $SiC-Si_3N_4$ composites was $260\;{\mu}m$ and $35\;{\mu}m$ in diameter, respectively.

• 한국세라믹학회지
• /
• 제13권1호
• /
• pp.25-29
• /
• 1976

The properties vary with quality of ferric-oxide that is major material of ferrites. In this point of view, a manufacturing method of pure and homogeneous fine ferric oxide is very important. The characters of this study are as follows: 1) Ferric oxide was made from waste pickling liquor of steel. 2) The crude ferric-oxide that is made by roasting the pickling liquor was dissolved in 20% HCI solution and then produced ferric chloride is purified by ethyl ether extraction. 3) The methanol solution of purified ferric chloride was sprayed into the refractory tube with compressed air and propane gas and then ignited leading to the ferric-oxide powder. 4) The produced oxide powder was introduced to the scrubber type vessel throught cooling system in order to collect the powder. 5) Crystalline phase of the powder was identified by X-ray diffraction and particle size, crystalline shape of the powder were investigated by settling method and electron microscope and the effects of concentration of ferric chloride in methanol on grain size were discussed. Results were obtained as fellows: 1) Total impurity in the ferric oxide produced from waste pickling liquor was 3.7%. 2) The solubilityof crude ferric oxide that was made from waste pickling liquor in HCI solution increased with the HCI concentration and reached to saturation range at 15% HCI concentration. 3) Extraction of FeCl3 increased with HCI concentration which is solvent. 4) Alpha ferric oxide obtained was very fine crystalline particles, the mean crystalline grain increased with the concentration of ferric chloride, and mean grain size distributed from 3.5$\mu$(at 0.5mole/l) to 0.5$\mu$(at 0.05mole/l).