• 한국가스학회지
• /
• 제13권3호
• /
• pp.49-53
• /
• 2009

릴리프시스템은 공정 내에 과압 방지하여 공정의 안전성을 높여주는 역할을 한다. 릴리프 시스템에서 방출되는 폐가스로 인한 폭발, 복사열, 독성가스 확산을 막기 위하여 플레어스택을 설치한다. 플레어스택에서는 공정의 안전성 향상을 위하여 안전한 연소가 가장 중요한 요소이며, 안전한 연소를 위하여 방출되는 가스량과 속도 제어는 API 521 code의 기술기준을 따르며, 플레어스택에서 발생하는 화염의 형상은 방출되는 가스의 압력과 질량유속에 의하여 jet fire의 형상을 하고 있다. 이는 화염의 형상은 완전 연소와 열 방출에 영향을 미치는 요소로 이 논문에서는 화염의 형상을 분석하였다. 화염의 길이는 API code와 jet fire 모델이 유사한 값을 보였으며, 화염은 지면에 더 많은 영향을 미치는 것으로 분석되었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제37권8호
• /
• pp.822-828
• /
• 2013

고체산화물형 연료전지는 운전온도가 고온이기 때문에 연료전지 시스템으로 공급되는 가스의 열관리 문제가 중요하다. 본 연구에서는 선박 배기가스의 폐열을 선박 전원용 500kW급 SOFC 시스템으로 공급되는 연료, 가스 및 물을 가열하는 열원으로 활용한 경우에 연료전지 애노드 및 캐소드로 공급되는 가스의 온도특성에 관하여 검토하였다. 본 연구에서 제안한 연료전지 시스템에서는 선박의 배기가스를 활용하지 않고 연료전지에서 배출되는 배기가스만으로 연료전지 시스템으로 공급되는 가스의 가열원으로 활용한 경우의 애노드 및 캐소드로 공급되는 가스의 온도가 963K로 가장 높음을 알 수 있었다. 또한 엔진의 출력(배기가스의 유량)은 연료전지 스택으로 공급되는 가스의 온도에 큰 영향을 미치지 않음을 알 수 있었다.

• 한국지반환경공학회 논문집
• /
• 제6권4호
• /
• pp.27-35
• /
• 2005

본 연구에서는 매립완료후 6년 경과된 매립지 내 물리적 조성, 총고형물, 수분, Gas분석 등을 통하여 비위생 매립지의 안정성을 평가하였다. 폐기물의 물리적 성상을 조사한 결과, 가연성 물질은 23.64%, 불연성 물질 76.36%를 차지하며, TS, VS, FS는 각각 77.69%, 74.24%, 25.75%를 차지하고 있다. $CH_4$농도는 전체평균 4.5%로 매우 낮은 값을 나타내고 있는데 이는 매립된 쓰레기 중 $CH_4$ 가스 생성 원인이 되는 생분해성 유기성분들이 모두 분해되어 안정화되었기 때문인 것으로 판단된다. $CO_2$의 농도 또한 평균 15%로 낮아 이 역시 매립된 쓰레기가 매우 안정화되었음을 의미하며, 매립지에서 환경적인 영향을 미치지는 않을 것으로 예상된다.

• 한국실내디자인학회논문집
• /
• 제18권6호
• /
• pp.221-228
• /
• 2009

Recently severity of ecological adaptation and climatic change due to global warming grows larger. According to the fourth report of IPCC in 2007, emission quantity of the earth greenhouse gas(GHGs) generated by activity of mankind increased with 80% since 1970. And it is forecasted that worldwide greenhouse gas will be increased with 25~90%(corresponding to $CO_2$) between 2000 and 2030. This increment of greenhouse gas($CO_2$) is expected to raise average temperature of the earth with the maximum $6.4^{\circ}C$, and sea surface with 59cm in 2090. Like this, destruction of environment by greenhouse gas is regarded as universal problem threatening the existence, not only the problem of one nation. Consequently, systematic correspondence to the global warming at the aspect of energy consumption is also needed in Korea. From the analysis result of 'Statistics of Energy Consumption' published by Green Korea in 2007, energy consumption increment of domestic universities was higher as many as 3.7 times than 22.5% of the whole energy consumption increment in our country. This says to be the direct example which shows that universities are huge sources of greenhouse gas emission. New constructing and enlarging buildings of each universities within campus are the most major reason for such a large increment of energy consumption in universities. The opinion that the possibility of causing energy waste and efficiency reduction is raised by increased buildings of universities has been propounded. That is, universities should make concrete goal and the plan for reducing emission of green house gas against climatic change, and should practice. Accordingly, there is the meaning that 2 aspects of environment-friendly design characteristics, that is application of energy utilizing technology, material usage of energy efficiency-side and environment-side, and introduction of natural element in the environmental aspect, were analyzed for facilities of university campus designed in environment-friendly point of view from initial stage of plan, and direction of environment-friendly design of university facilities in the future was groped in order to grasp environment-friendly design tendency of internal and external University facilities based on this analysis of this paper.

• 유기물자원화
• /
• 제19권1호
• /
• pp.93-101
• /
• 2011

본 연구는 소각 시스템에 적용되는 반건식 반응기의 모델링 연구를 수행 하였다. 전산유체역학(CFD)을 이용하여 반건식 반응기에서 속도분포 온도분포를 조사하여 반응기의 최적 운전 조건을 조사하였다. 본 모델에 사용된 반응기의 직경은 3 m 이며 높이는 9 m 이다. 반응기로 유입되는 연소가스의 양은 $6,125Nm^3/hr$ 이며 반응기 유입 가스의 온도는 493K 이다. 반응기에 유입되는 소석회 양은 151 kg/hr 이다. 반응기의 입구 형상이 변하면 반응기 내의 온도가 변하며 반응기 내의 가스속도는 0.48 m/sec 에서 1.17m/sec 였으며, 반응기 출구의 가스속도는 6.9에서 7.42m/sec 였다. 모델링 결과에 의하면 반응기 내의 평균 가스 속도와 출구에서의 평균가스 속도는 각각 0.489 m/sec와 7.424 m/sec 였으며, 반응기 출구 온도는 448 K 였다.

• 한국환경과학회지
• /
• 제11권6호
• /
• pp.543-551
• /
• 2002

A Numerical simulation on the thermal flow performance was carried out to propose the incinerator type for the domestic refuses and to investigate the design factor and operating conditions. The SSTI(Standard Stoker Type Incinerator) proposed in this study was modified from the type with central f)ow. It has the characteristics of good mixing between refuse and hot combustion gas in primary combustion chamber and between unburned gas inflowing and secondary air jet in secondary chamber. By predictive results, the SSTI was no recirculation zone in secondary chamber so that mixing time was increased with high residence time. It has good characteristics of combustion and low emission. Parametric screening studies have been understood with phenomenon of combustion in incinerator.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.821-824
• /
• 2009

LFG-MGT CHP system development project with $CO_2$ enrichment in greenhouses was introduced. LFG is produced from the anaerobic digestion of landfilled waste and it has been utilized for power/heat generation since it contains around 50% of $CH_4$. Utilization of LFG from small scale landfill is also needed as well as large scale landfill. However, due to economy of scale, it is very difficult to develop business model. In this context, combining CHP system with greenhouses is considered as feasible option for LFG utilization. LFG-MGT CHP system with $CO_2$ fixation in greenhouses has been derived as an active greenhouse gas reduction strategy, The focus of the system is beyond carbon neutral LFG utilization to neutral carbon absorption. The system is feasible in terms of direct and indirect $CO_2$ emission reduction with more economical way.

• 한국해양공학회지
• /
• 제13권3B호
• /
• pp.22-28
• /
• 1999

The purpose of this study is to investigate the NOx emission of turbulent diffusion flame formed in the after burner, which is located on the waste gas coming out from the test furnace. Three types of flame was tested and each of which was changed by adequate equivalence ratio. It is necessary to study more about NOx reduction effect in the after burner system.

• 한국수소및신에너지학회논문집
• /
• 제19권3호
• /
• pp.260-265
• /
• 2008

As one of renewable energy sources, biomass is playing a major role in reducing the greenhouse gas emission in the UK. The country currently produces about 4.5% (18.1TWh in 2006) of the total electricity generation from renewables, where biomass-based sources accounts for 50% of the amount and the remainder mostly from hydro and windpower. In 2007, the UK government has announced its new energy policy through the Energy White Paper, which includes an ambitious national target of 60% cuts in carbon emission by 2050. Complementary strategic plans in key renewable energy technologies accompanied the Energy White Paper, including biomass strategy, waste strategy and low carbon transportation strategy. This paper summarizes the current status and policy of UK for renewable energy production with focus on the use of biomass and bioenergy.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 A
• /
• pp.291-293
• /
• 1999

This paper proposed the optimal operational scheduling of cogeneration system for paper mill connected with several auxiliary devices. Auxiliary devices that include auxiliary boilers, waste heat boilers and sludge incinerators operate with multi-cogeneration systems. Especially environment element was considered in objective function to solve the environment problem. And GAs(Genetic Algorithms) was applied to optimize and to analyse nonlinear operational property of cogeneration system of paper mill connected with several auxiliary devices. C-language was used to GAs computation. Electricity can be purchased through power system from utility. The proposed operational strategy on cogeneration system for paper mill to increase energy efficiency can be applied to the similar cogeneration system of industrial field.