• Title/Summary/Keyword: Waste gas

검색결과 1,141건 처리시간 0.024초

복합차수층 조성기술을 이용한 폐기물매립지 바닥차수층 시공사례 (A Case Study of Bottom Liner Construction Using Composite Liner Technology in a Solid Waste Landfill)

  • 이규정;이남훈;박수영;전원표;이채영
    • 유기물자원화
    • /
    • 제15권3호
    • /
    • pp.90-96
    • /
    • 2007
  • 폐기물 관리시설 중 하나인 폐기물매립지는 유해성분을 함유한 침출수와 가스로부터 발생되는 위생문제와 환경오염 방지를 위해 필요한 시설이며 이중에서 바닥차수층은 가스포집층과 더불어 반드시 설치되어져야 히는 공종이다. 매립된 폐기물에서 발생된 오염된 침출수는 지하수를 오염시키기 때문에 바닥치차수층은 내구성과 함께 $1{\times}10^{-7}cm/sec$ 이하의 저투수성을 확보해야만 한다. 본 고에서는 강원도 P군 폐기물 종합처리시설 중 "복합차수층 조성기술" 이 적용된 매립시설의 바닥차수층 공종과 관련하여 현장시공과정 상의 시험내용 및 품질관리 사항들을 요약, 정리하여 개발기술의 현장적용 사례를 소개하고자 한다.

  • PDF

Comparison of Solid Waste Stabilization and Methane Emission from Anaerobic and Semi-Aerobic Landfills Operated in Tropical Condition

  • Sutthasil, Noppharit;Chiemchaisri, Chart;Chiemchaisri, Wilai;Wangyao, Komsilp;Towprayoon, Sirintornthep;Endo, Kazuto;Yamada, Masato
    • Environmental Engineering Research
    • /
    • 제19권3호
    • /
    • pp.261-268
    • /
    • 2014
  • Leachate quality and methane emission from pilot-scale lysimeters operated under semi-aerobic and anaerobic conditions were monitored for 650 days. Two semi-aerobic lysimeters were filled with un-compacted and compacted municipal solid wastes whereas two anaerobic lysimeters containing compacted wastes were operated with leachate storage at 50% and 100% of waste height, respectively. Despite having high moisture in wastes and operating under tropical rainfall events, leachate stabilization in semi-aerobic lysimeters took place much faster resulting in BOD reduction by 90% within 60 days, significantly shorter than 180-210 days observed in anaerobic lysimeters. Nitrogen concentration in leachate from semi-aerobic lysimeter could be reduced by 90%. In term of gas emission, semi-aerobic lysimeter with un-compacted wastes had much lower methane emission rate of $2.8g/m^2/day$ compare to anaerobic lysimeters ($62.6g/m^2/day$) through seasonal fluctuation was observed. Nevertheless, semi-aerobic lysimeter with waste compaction has similar performance to anaerobic lysimeter.

국내 음식물쓰레기 온실가스 저감을 위한 선순환체계 구축 (Development of Sustainable Food Waste Management for Reducing Greenhouse Gases Emissions in Korea)

  • 이새로미;박재로;안창혁
    • Ecology and Resilient Infrastructure
    • /
    • 제7권4호
    • /
    • pp.248-255
    • /
    • 2020
  • 본 연구에서는 국내 음식물쓰레기 (food waste, FW) 분야에 대한 재활용 현황을 분석하고 green house gases (GHG) 배출 관리방안에 대해 고찰하였다. 연구 결과, FW의 자원 활용성을 향상시키고 GHG 배출을 부가적으로 저감시키기 위해서는 적절한 선순환체계가 필요하다는 결론을 얻었다. 효과적인 퇴비화를 위해서 우선 GW의 활용이 고려되었다. 특히 3세대 바이오매스로써의 GW (phytoplankton, periphyton, macrophyte etc.)는 퇴비화 공정에서 FW의 단점을 보완하고 질적 능력을 향상시킬 수 있는 좋은 기능성 첨가제로 판단된다. 또 하나의 접근법은 최종산물 (예: 토양개량제)을 오염물질 완충이 가능한 bio-filter로 가공하여 그린인프라에 적용하는 방안이다. 이러한 생태공학적 접근과 시도는 안정화된 재활용 산물의 기존 활용 이외에도 FW 자원화에 대한 새로운 적용처를 제시할 수 있으므로 향후 효과적인 탄소 넷제로 (Net-Zero) 시스템 구축에 기여할 수 있을 것으로 판단된다.

미활용 열에너지의 집단에너지 주민 수용성에 관한 연구 (A Study on Residents' Acceptance of Unutilized Heat in District Heating)

  • 원두환;오세신
    • 자원ㆍ환경경제연구
    • /
    • 제32권3호
    • /
    • pp.191-215
    • /
    • 2023
  • 본 연구는 미활용 열에너지를 집단에너지 열원으로 활용할 경우 주민 수용성을 비교 평가하는 것에 초점을 두고 있다. 열 부문 탄소중립에 있어 중요한 수단인 미활용 열에너지는 원활한 보급을 위해 주민 수용성의 확보가 중요하기 때문이다. 난방 소비자를 대상으로 한 설문조사를 통해 미활용 열에너지에 대한 인식조사를 수행하였으며, 컨조인트 모형을 이용해 소각열과 수열, 데이터센터 폐열을 기존의 가스 열원과 지불의사액을 평가해 비교하였다. 분석결과 제시된 미활용 열에너지의 보급 활성화가 중요하다고 인식하면서도 미활용 소각열에 비해서 수열과 데이터센터 폐열에 선호도가 높음을 확인하였다.

SO3를 다량 함유한 폐석고보드 미분말을 첨가한 3성분계 무기결합재의 길이변화 특성 (The Length Change Characteristic of the Ternary System Inorganic Composites adding the Waste Gypsum Board Micro Powder containing SO3 the great quantity)

  • 김윤미;박종필;이상수;송하영
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2012년도 추계 학술논문 발표대회
    • /
    • pp.65-66
    • /
    • 2012
  • The cement used in the construction industry of the manufacturing process, large amounts of the greenhouse gas, CO2 and is currently being studied for cement substitutes that reduce greenhouse gas issue. Therefore, the this study as a replacement for cement industrial by-product of blast furnace slag, red mud, silica fume and alkali-activator, using only inorganic composites without high-temperature calcination process were manufactured. The waste gypsum board micro powder added to compensate for the shrinkage cracks, the compressive strength and flow, and length change characteristics were investigated. Consequently, The setting time was shortened as GB added And liquidity was reduced. GB 2%, 7 days curing the added strength of specimens was the highest. Came out, and change the length of the Plain least.

  • PDF

혈장접착제를 이용한 생활목질폐잔재로부터 제조된 흑탄 보드의 성질 (Properties of Black Charcoal Board Manufactured from Domestic Wood Waste by Using Serum Protein Adhesive)

  • 서인수;이화형
    • 농업과학연구
    • /
    • 제37권2호
    • /
    • pp.267-270
    • /
    • 2010
  • This study was carried out to manufacture black charcoal board from domestic wood waste by using serum protein adhesive which is natural, environment-friendly and human-friendly. For the preparation of the serum protein adhesive, pig blood from slaughterhouse was centrifuged and serum was separated from corpuscles and concentrated to 30% by dry weight basis. The particle size of charcoal from domestic wood waste for this study was #6-60. Hot pressing schedule was $170^{\circ}C$ and 40kgf/$cm^2$ (1 min)-10kgf/$cm^2$ (2.5 min)-40kgf/$cm^2$ (5 min). The black charcoal board made by the addition of 13% serum protein adhesive on dry weight basis gave 41.76kgf/$cm^2$ of bending strength, 8.12kgf/$cm^2$ of internal bonding strength, and excellent gas adsorption and workability.

폐자기 혼합비율 마그네시아 인산염 복합체(MPC) 외장재 인조석재의 특성 (Characteristic of the mixing ratio Magnesia Phosphate Composite (MPC) Exterior Material Artificial Stone According to the Waste Porcelain mixing ratio)

  • 유용진;조병남;이상수;송하영
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2013년도 추계 학술논문 발표대회
    • /
    • pp.160-161
    • /
    • 2013
  • Recently, the enviroment problem is serious due to the global warming phenomenon because of the greenhouse gas exhaustion. In addition, the effort to reduce the problem in the situation where the severity of the destruction of environment because of the indiscriminate picking of the that is the raw material of the cement, Accordingly, in the interior of a country, the industrial site using the artificial stone instead of the natural stone is increased. Thus the cement reduction amount of use and substitute material research is the urgent actual condition with the gas emission, which here it is generated in conducting compression molding in the building stone manufacturing process performance degradation phenomenon and fire resistance, and problem of the durability. limestone and aggregate and exhaustion of resource are emphasized is continued. In this research, the fly ash and waste porcelain is applied to the magnesia phosphate composite (MPC) and the characteristic of the artificial stone according to it tries to be looked into.

  • PDF

Hydrodynamic and Heat Transfer Studies in Riser System for Waste Heat Recovery using Chalcopyrite

  • Popuri, Ashok Kumar;Garimella, Prabhakar
    • Korean Chemical Engineering Research
    • /
    • 제56권2호
    • /
    • pp.252-260
    • /
    • 2018
  • Energy, a critical input, is to be efficiently managed via waste heat recovery and energy reuse for the economic viability of a process industry. In particular, cement manufacture demands a huge quantum of energy, for the necessary reactions. Huge amounts of hot effluent gases are generated. Energy recovery from these waste gases is an area that is of contemporary research interest. Now, about 75% of total heat recovery takes place in the riser of the suspension pre-heater system. This article deals with the hydrodynamic and heat transfer aspects of riser typically used in the cement industry. An experimental apparatus was designed and fabricated with provision for the measurement of gas pressure and solid temperatures at different heights of the riser. The system studied was air - chalcopyrite taken in different particle sizes. Acceleration length ($L_A$) determined at different parametric levels was fitted to an empirical correlation: $L_A/d_t=4.91902(d_p/d_t)^{0.10058}(w_s/w_g)^{-0.11691}(u_g{\mu}_g/d_t^2g{\rho}_g)^{0.28574}({\rho}_p/{\rho}_g)^{0.42484}$. An empirical model was developed for Nusselt number as a function of Reynolds and Prandtl numbers using regression analysis: $Nu=0.40969(Re_p)^{0.99953}(Pr)^{0.03569}$.

벤토나이트 완충재에서의 기체 팽창 흐름 수치 모델링: DECOVALEX-2019 Task A (Numerical Modelling for the Dilation Flow of Gas in a Bentonite Buffer Material: DECOVALEX-2019 Task A)

  • 이재원;이창수;김건영
    • 터널과지하공간
    • /
    • 제30권4호
    • /
    • pp.382-393
    • /
    • 2020
  • 고준위방사성폐기물을 처분하기 위한 심층처분시스템의 공학적 방벽은 처분 용기에서 방사성 핵종 누출이 발생하더라도 주변 암반으로의 누출 속도를 늦춰주는 역할을 수행해야하기 때문에 장기적으로 그 성능을 유지하여야 한다. 특히 벤토나이트 완충재와 같이 점토 물질을 다량 함유한 매질에서만 나타나는 기체 흐름 현상인 팽창 흐름은 벤토나이트 완충재의 장기 성능에 영향을 미칠 수 있기 때문에 이 현상을 명확히 규명하는 것이 매우 중요하다. 이에 따라 DECOVALEX-2019 Task A에서는 팽창 흐름에 대한 수리-역학적 메커니즘을 규명하고, 기체 이동 현상의 정량적 평가를 위한 새로운 수치 해석 기법 개발 및 검증을 수행하고자 진행되었다. 이를 위해 본 연구에서는 기존의 전통적인 다공성 매질에서의 2상 유동 및 유효응력 개념을 고려한 역학 모델을 기반으로, 손상도 개념을 적용함으로써 매질의 변형에 의한 기체의 팽창 흐름을 모사할 수 있는 수리-역학적 상호작용을 고려한 해석 모델을 개발하였다. 또한 개발된 모델을 이용하여 1차원 및 3차원 기체 주입 시험 결과와의 비교를 통해 모델 검증 및 적용성 검토를 수행하였다. 수치 해석 결과 기체 압력에 의한 팽창 흐름으로 인한 갑작스러운 공극 수압, 응력, 기체 주입량 및 유출량 증가 현상을 확인할 수 있었지만, 개발된 해석 모델에서 수리-역학적 상호작용의 영향이 과소평가 되는 한계를 확인할 수 있었다. 그럼에도 불구하고 본 연구는 팽창 흐름에 대한 예비 모델을 제공하고 후속 연구의 발전된 모델을 개발하기 위한 기반을 제공한다는 점에서 의의가 있다. 또한 본 연구에서 개발된 수리-역학적 상호작용을 고려한 수치 모델은 향후 실험실 및 현장 시험 결과 데이터 분석에 활용될 수 있을 뿐만 아니라, 실제 고준위방사성폐기물 심층처분시스템의 장기 성능평가에도 활용될 수 있을 것으로 판단된다.

30kW 급 합성가스 열병합 시스템 개발 및 효율 성능평가 (Development and efficiency evaluation of 30kW scale syngas cogeneration system)

  • 박일건;김상태;노귀성
    • 한국응용과학기술학회지
    • /
    • 제36권4호
    • /
    • pp.1427-1433
    • /
    • 2019
  • 본 연구에서는 합성가스의 에너지화를 위한 가스엔진 성능 평가를 수행하였다. 회전수 1800 rpm 조건에서 공기과잉률이 1, 1.1, 1.2, 1.3, 1.4, 1.5, 1.6 증가에 따른 엔진출력(kWm)과 열효율(%)을 평가한 결과, 공기과잉률 λ 1.4에서 엔진출력 34 kWm를 나타냈으며, 공기과잉률이 증가할수록 엔진 열효율은 전반적으로 감소하는 경향을 보였다. 엔진출력 34 kWm 조건에서 공기과잉률이 1, 1.1, 1.2, 1.3, 1.4 증가시 열효율이 34.2%, 36.9%, 37.2%, 37.4%, 38.1%로 증가하였고, 발전출력을 통한 종합효율은 발전출력 30 kWe 부하조건에서 38.7 kg/h의 연료를 소모하여 32.1%의 발전효율과 냉각수와 배기가스에서의 열회수를 통해 57.3 kW의 폐열을 회수하여 53.8%의 열을 회수하여 총 85.8%의 종합효율을 보이는 것으로 나타났다.