• Journal of Korean Society for Atmospheric Environment
• /
• v.19 no.6
• /
• pp.719-731
• /
• 2003

In order to maintain and manage ambient air quality, it is necessary to identify sources and to apportion its sources for ambient particulate matters. The receptor methods were one of the statistical methods to achieve reasonable air pollution strategies. Also, receptor methods, a field of chemometrics, is based on manifold applied statistics and is a statistical methodology that analyzes the physicochemical properties of gaseous and particulate pollutant on various atmospheric receptors, identifies the sources of air pollutants, and quantifies the apportionment of the sources to the receptors. The objective of this study was 1) after obtaining results from the PMF modeling, the existing sources of air at the study area were qualitatively identified and the contributions of each source were quantitatively estimated as well. 2) finally efficient air pollution management and control strategies of each source were suggested. The PMF model was intensively applied to estimate the quantitative contribution of air pollution sources based on the chemical information (128 samples and 25 chemical species). Through a case study of the PMF modeling for the PM-10 aerosols, the total of 11 factors were determined. The multiple linear regression analysis between the observed PM-10 mass concentration and the estimated G matrix had been performed following the FPEAK test. Finally the regression analysis provided quantitative source contributions (scaled G matrix) and source profiles (scaled F matrix). The results of the PMF modeling showed that the sources were apportioned by secondary aerosol related source 28.8 ％, soil related source 16.8％, waste incineration source 11.5%, field burning source 11.0%, fossil fuel combustion source 10%, industry related source 8.3％, motor vehicle source 7.9%, oil/coal combustion source 4.4％, non-ferrous metal source 0.3％. and aged sea- salt source 0.2％, respectively.

• Journal of Korean Society for Atmospheric Environment
• /
• v.19 no.6
• /
• pp.701-717
• /
• 2003

The objective of this study was to extensively estimate the air quality trends of the study area by surveying con-centration trends in months or seasons, after analyzing the mass concentration of PM-10 samples and the inorganic lements, ion, and total carbon in PM-10. Also, the study introduced to apply the PMF (Positive Matrix Factoriza-tion) model that is useful when absence of the source profile. Thus the model was thought to be suitable in Korea that often has few information about pollution sources. After obtaining results from the PMF modeling, the existing sources at the study area were qualitatively identified The PM-10 particles collected on quartz fiber filters by a PM-10 high-vol air sampler for 3 years (Mar. 1999∼Dec.2001) in Kyung Hee University. The 25 chemical species (Al, Mn, Ti, V, Cr, Fe, Ni, Cu, Zn, As, Se, Cd, Ba, Ce, Pb, Si, N $a^{#}$, N $H_4$$^{+}$, $K^{+}$, $Mg^{2+}$, $Ca^{2+}$, C $l^{[-10]}$ , N $O_3$$^{[-10]}$ , S $O_4$$^{2-}$, TC) were analyzed by ICP-AES, IC, and EA after executing proper pre - treatments of each sample filter. The PMF model was intensively applied to estimate the quantitative contribution of air pollution sources based on the chemical information (128 samples and 25 chemical species). Through a case study of the PMF modeling for the PM-10 aerosols. the total of 11 factors were determined. The multiple linear regression analysis between the observed PM-10 mass concentration and the estimated G matrix had been performed following the FPEAK test. Finally the regression analysis provided source profiles (scaled F matrix). So, 11 sources were qualitatively identified, such as secondary aerosol related source, soil related source, waste incineration source, field burning source, fossil fuel combustion source, industry related source, motor vehicle source, oil/coal combustion source, non-ferrous metal source, and aged sea- salt source, respectively.ively.y.

• Applied Chemistry for Engineering
• /
• v.7 no.1
• /
• pp.118-128
• /
• 1996

N-methyl, N-butyl and N,N-dibutyl chitosan derivatives were prepared by Schiff's base formation and hydrogenation in aqueous media. Furthermore quaternization of the chitosan derivatives was performed in N-methyl-2-pyrrolidone using methyl iodide to obtain water soluble cationic polyelectrolytes. It was confirmed that O-alkylation was occured as well as selective N-alkylation in these reactions. Chitosan and chitosan derivatives with quaternary ammonium iodide showed high flocculation power as the cationic flocculant. When tested on paper mill waste water, they showed high flocculation power, independing of pH range. The flocculation power was increased as the N-alkyl chain length was increased. Among them, N-butyl dimethyl chitosan ammonium iodide showed better flocculation power than chitosan. But, N,N-dibutyl-N-methyl chitosan ammonium iodide showed less flocculation powre than chitosan itself.

• Journal of Animal Environmental Science
• /
• v.8 no.2
• /
• pp.87-98
• /
• 2002

This study was conducted to determine nutritional values of different sources of food residues(FR) released in autumn and to compare them with nutrient requirements on NRC standard feeding system of swine. Hospital or cafeteria FR contained more cooked rice and side dishes residues and less vegetable residues and fruit peel, resulting in higher energy and lower fiber contents, compared to apartment complex FR, which had opposite patterns to these results. Chemical composition between hospital and cafeteria FR was almost similar. Salt(NaCl) content was more than 9 folds of NRC swine requirement, but much lower than the maximum tolerant level. Essenial and non-essential amino acids profile was similar among FR sources. Hospital or cafeteria FR protein had a similar pepsin digestibility to soybean meal protein. Apartment complex FR protein, however, had a much lower pepsin digestibility. When NRC nutrient requirements are considered, FR in swine diets could satisfy requirements of protein and all the essential amino acids, 75${\sim}$111% of digestible or metabolizable energy, and most of the major and minor minerals. All the FR contained extremely low levels of toxic heavy metals, indicating that they are completely safe from these toxic substances. It was concluded that hospital or cafeteria FR could be a nutritionally excellent and balanced feed source for swine.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.217-217
• /
• 2017

Seed priming leading to improved emergences, germination speed and uniformity under unfavorable conditions without loss of longevity are the best level of techniques. We studied the possibility to obtain primed seed with reduced mean germination time (MGT) and uniformity but with simple, fast and effective methods. The experiments were carried out at $15^{\circ}C$ for 16 hours with priming treatment. To compare the effects of each treatment, we used 200mM $CaCl_2$ priming or hydro priming or no imbibition after ultrasonication or red light treatment. The light treatment was performed by irradiating 2000 lux of red light for 15, 30, 60, and 120 minutes. Addition, in order to investigate the effect of the priming solution, treated at 200mM $CaCl_2$ for 8 hours. Ultrasonication treatment was performed for 5, 10, and 20 minutes at exposures of 13.0, 17.3, and 21.6 kHz during priming. For liquid smoke (LS) treatment, seed soaked in 0%, 0.5%, 1.0%, 5.0% and 10.0% of diluted water and 200mM $CaCl_2$ solution. After each treatment, the seeds were dried to moisture content ranged 5-8% at $25^{\circ}C$ for 24 hours. The effect of seed treatment was evaluated with germination percentage (GP), MGT, germination index(GI), germination rate(GR), Germination Uniformity(GU) and heath seed percentage(HS). For several factors tested, we found that the desired germination improvement could be obtained by treating the seed with ultrasonication at 17.3 kHz for 5 minutes in water or red light exposure at 2000 lux for 120 min in water that resulted very similar to those used to 200mM $CaCl_2$ priming for 16 hrs. However, LS treatment showed no improvement in all diluted solution. Therefore, the methods applied ultrasonication and red light treatment showed high potential for fast and easy treatment avoiding pollution of salt solution waste.

• Analytical Science and Technology
• /
• v.11 no.6
• /
• pp.452-459
• /
• 1998

Crosslinked chitin was prepared from epichlorohydrin and chitin which was isolated from waste marin source. The crosslinked chitosan were prepared by the deacetylation of the crosslinked chitin with a strong base. 2,2'-Iminodibenzoic acid-crosslinked chitosan was prepared by reacting 2,2'-Iminodibenzoic acid salt with crosslinked chitosan-Cl which was obtained by chlorination of crosslinked chitosan. The adsorptivity of Pb(II), Cu(II), Cd(II) was studied as a synthetic adsorbent. Experimental results for the adsorption and the recovery characteristics showed that the more pH increase, the more amount of adsorbed metal ion increase. Optimum adsorption time was 1 hr, and adsorption capacity was increased in order of $Cu^{2+}$<$Cd^{2+}$<$Pb^{2+}$, and recovery capacity was increased in order of $Cd^{2+}$<$Cu^{2+}$<$Pb^{2+}$.

• Journal of Applied Biological Chemistry
• /
• v.42 no.3
• /
• pp.140-145
• /
• 1999

Livestock manure is generally beneficial to soil and crop production when appropriate amount is applied, but excessive application may be detrimental to soil and water environments. A proper protocol of livestock waste treatment is required to manage the quality of soil and water. A trickling filter system using rice straw media was employed to treat piggery wastewater from small-scaled livestock farms as an alternative to the currently available methods. Batches of piggery wastewater were treated with this system, and the byproducts of rice straw media and trickling filtrate were applied to the soil with cultivating rye (Secale cereale L.). Objective of this research was to characterize these byproducts for the sustainable soil amendments and rye production. Both the treated straw medium and filtrate were proven to be effective organic fertilizers for rye plant development, with the enhanced but balanced absorption of nutrients. The synergistic effects of filtrate in addition to straw application did not show, but the filtrate appeared to lead to a higher water content of the plant. No specific nutrient deficiency or toxicity symptom was shown due to the salts derived from the byproducts applied. Chemical parameters of the soil quality were significantly improved with the application of straw medium either with or without the filtrate. Judging from parameters relating to the salt accumulations, such as sodium adsorption ratio (SAR), electrical conductivity (EC), exchangeable sodium percentage (ESP), potassium adsorption ratio (KAR), and residual P concentrations, the byproducts from piggery wastewater exhibited no detrimental effects on soil quality within the ranges of treatments used. In addition to the effectiveness of the rice straw trickling filter system for the small-scaled swine farms, both rice straw medium and filtrate could be recycled for the sustainable soil amendment and plant nutrition.

• Journal of Microbiology and Biotechnology
• /
• v.21 no.9
• /
• pp.947-953
• /
• 2011

A fungal strain, Aspergillus terreus strain GA2, isolated from an agricultural field cultivating sweet sorghum, produced feruloyl esterase using maize bran. In order to obtain maximum yields of feruloyl esterase, the solid state fermentation (SSF) conditions for enzyme production were standardized. Effective feruloyl esterase production was observed with maize bran as substrate followed by wheat bran, coconut husk, and rice husk among the tested agro-waste crop residues. Optimum particle size of 0.71-0.3 mm and moisture content of 80% favored enzyme production. Moreover, optimum feruloyl esterase production was observed at pH 6.0 and a temperature of $30^{\circ}C$. Supplementation of potato starch (0.6%) as the carbon source and casein (1%) as the nitrogen source favored enzyme production. Furthermore, the culture produced the enzyme after 7 days of incubation when the C:N ratio was 5. Optimization of the SSF conditions revealed that maximum enzyme activity (1,162 U/gds) was observed after 7 days in a production medium of 80% moisture content and pH 6.0 containing 16 g maize bran [25% (w/v)] of particle size of 0.71-0.3 mm, 0.6% potato starch, 3.0% casein, and 64 ml of formulated basal salt solution. Overall, the enzyme production was enhanced by 3.2-fold as compared with un-optimized conditions.

• Korean journal of food and cookery science
• /
• v.15 no.4
• /
• pp.370-376
• /
• 1999

The red pepper seeds(RPS), an industrial waste produced from red pepper powder industry, were investigated for its possible use as natural hot taste seasoning. The RPS was extracted with water with addition of salt, sugar, phosphate and citric acid at 70-100$^{\circ}C$ Effects of preheat treatments of steaming at 100$^{\circ}C$ and roasting at 215$^{\circ}C$ and 330$^{\circ}C$ were also studied on the flavor of the RPS extracts. The results showed that steaming and roasting increased the solid yield and reduced the turbidity. The hot flavor of RPS extracts was generally decreased by steaming and roasting. Extraction of RPS at the temperature range of 70-100$^{\circ}C$ for 10-60 minutes showed that solid yield were relatively high of 27% at 80$^{\circ}C$ for 30 minutes with the highest score of hot flavor. When the extraction was carried out with addition of NaCl, sucrose, Na$_2$HPO$_4$ and citric acid, the solid yield was little affected by their addition except a little increase by 0.5% NaCl and 0.2% Na$_2$HPO$_4$ and hot flavor was little affected.

• Journal of Microbiology and Biotechnology
• /
• v.31 no.8
• /
• pp.1045-1059
• /
• 2021

Various abiotic stressors like drought, salinity, temperature, and heavy metals are major environmental stresses that affect agricultural productivity and crop yields all over the world. Continuous changes in climatic conditions put selective pressure on the microbial ecosystem to produce exopolysaccharides. Apart from soil aggregation, exopolysaccharide (EPS) production also helps in increasing water permeability, nutrient uptake by roots, soil stability, soil fertility, plant biomass, chlorophyll content, root and shoot length, and surface area of leaves while also helping maintain metabolic and physiological activities during drought stress. EPS-producing microbes can impart salt tolerance to plants by binding to sodium ions in the soil and preventing these ions from reaching the stem, thereby decreasing sodium absorption from the soil and increasing nutrient uptake by the roots. Biofilm formation in high-salinity soils increases cell viability, enhances soil fertility, and promotes plant growth and development. The third environmental stressor is presence of heavy metals in the soil due to improper industrial waste disposal practices that are toxic for plants. EPS production by soil bacteria can result in the biomineralization of metal ions, thereby imparting metal stress tolerance to plants. Finally, high temperatures can also affect agricultural productivity by decreasing plant metabolism, seedling growth, and seed germination. The present review discusses the role of exopolysaccharide-producing plant growth-promoting bacteria in modulating plant growth and development in plants and alleviating extreme abiotic stress condition. The review suggests exploring the potential of EPS-producing bacteria for multiple abiotic stress management strategies.