• 환경위생공학
• /
• 제16권1호
• /
• pp.40-46
• /
• 2001

Conventional membrane systems was difficult to treatment for pulp and paper mills waste warter. Technological advances in membrane filtration systems have created opportunity for pulp and paper mills to treat effluent streams in order to meet stricter environmental constraints. "Vibratory Shear Enhanced Processing(VSEP)" developed by new logic international makes if possible to filter effluent streams without the fouling problems exhibited by conventional membrane systems. Various kinds of waste water occurred to and paper mills experiment with "VSEP" set up conventional membrane. The results were as followes : Excepting ultra filter($0.1{\mu}\textrm{m}$ Teflon, C-100, G-50), Nano filter(NTR-7450, DS-5, PVD-1) and reverse osmosis(ACM-4) was treated with very excellent weight of treatment, electric conductivity, removal COD, TDS, turbidity.

• 펄프종이기술
• /
• 제41권3호
• /
• pp.71-75
• /
• 2009

Cotton waste is usually used for cultivating agaric mushroom after outdoor fermentation for a few months. Electron beam was used to break down the polymer chaims of cotton waste for increasing low molecular weight soluble sugars, which may enhance the agaric mushroom cultivation. By increasing electron beam radiation, alpha cellulose content of the cotton waste was decreased while beta cellulose content and hot water solubles were increased. Electron beam radiation over 240 kGy on cotton waste caused significant increase of mushroom yield without lowering mushroom quality.

• Journal of Biosystems Engineering
• /
• 제43권4호
• /
• pp.362-368
• /
• 2018

Purpose: Self-sufficiency in paper production is desired in Nigeria. This study was aimed at evaluating the performance of a locally fabricated batch pulp digester. Methods: The pulp yields of sheaths generated as waste in the production of bamboo (Bambusa vulgaris) laminates were determined at different liquor concentrations and treatment time after preliminary experiments to ascertain the conditions under which the sheath started to pulp. Moreover, the optimum pulping conditions and fiber characteristics were determined and estimated, respectively, to ascertain the pulp fiber suitability for paper production. Results: An optimum pulp yield of 65.1% was obtained at 50% NaOH and 25% $Na_2S$ liquor concentration (w/w) when the cooking time was 4 h. The results of fiber characterization of the pulp indicated an average fiber length of 2.19 mm with a low Runkel ratio of 1.63, both of which signify the suitability of the pulp for medium quality paper production. Conclusions: Softwood pulp can be blended with the fibers to improve the strength of the produced paper; further investigation should be carried out to use other non-woody plants for pulp and papermaking.

• 펄프종이기술
• /
• 제36권1호
• /
• pp.30-36
• /
• 2004

Waste papers(MOW and ONP) were deinked with alkaline cellulolytic enzyme from Coprinus cinereus 2249. The effectiveness of alkaline enzyme on sticky contaminant removal and bleaching of recycling pulp was investigated. The conclusions obtained from the results are as follows. The brightness of deinked pulps MOW and ONP was most high in 0.4IU enzyme treatment. \circled2 The removal effect of sticky contaminant was enhanced with alkaline cellulolytic enzyme treatment. Bleaching with sodium hydrosulfite was most effective in one and two stage bleaching after enzyme treatment of mixed wastepaper of MOW and colored paper. \circled4 The brightness of alkaline enzyme deinked ONP was increased 20％ with $H_2O$$_2$ bleaching.

• 펄프종이기술
• /
• 제45권3호
• /
• pp.9-19
• /
• 2013

This research was performed to make functional papers by using the waste of herbal medicine such as Astragalus membranaceus, Angelica acutiloba, and Artemisia capillaris as additives, and to evaluate their physical and optical properties of the manufactured paper. The physical and optical properties were decreased with the increase of the amount of herbal medicine. Of those manufactured papers, the functional paper with Artemisia capillaris showed the dramatic decrease in its physical properties. Adding the herbal medicine waste as additives developed the aesthetic pattern on the surface of the manufactured paper. The paper showing the black pattern on white surface was most favored. Different patterns could be made by changing the size of fibers and the amount of wastes. There was odor emitted from the paper due to the herbal medicine waste, which make the paper to have a potential for the diverse purpose. The herbal medicine waste can be applied to replace weighting agents in the manufacturing process of paper or used for the fuctional additives, resulting in the reduce of the quantity of a pulp consumed. The paper with 10-20% Angelica acutiloba waste were thought to have the most excellent quality on the process point of view.

• 미생물학회지
• /
• 제12권1호
• /
• pp.31-36
• /
• 1974

Four strains of yeasts were chosen from those isolated previously, and a strain from 160 isolates collected in this year were examined for the treatment of pulp waste liquor. Experiments about optimum nutrient condition, composition of cells, and reduction of B.O.D. on the "S" pulp industry waste liquor were performed with 5 strains. 1. The isolates(strain 112) was identified as Candida utilis. 2. The optium concentration of 4 components of nutrients were ($NH_4$)$SO_2$lg/l, yeast extract 70mg/l, $KH_2PO_4$ 300mg/l, and $MgSO_4{\ddot}7H_2O$ 500mg/l. 3. Specific growth ratio of Candida utilis KYRI 112 was 0.48/hr at optimum nutrient media and the yield was 0.45%(V/V). 4. Endomycopsis capsularis KYRI 613 contained more crude protein than the most of commercial yeasts. 5. The B.O.D. of waste liquor was reduced ro 20% of its value by the culture.e culture.

• 환경위생공학
• /
• 제12권1호
• /
• pp.39-48
• /
• 1997

The study was conducted to know the possibility that the removal efficiency of organic and suspended solids(SS) could be increased by suppling of sea water and the optimum amount of sea water to be supplied treat bleaching waste water by lime coagulation settlement at pulp mill process. When the lime dosage was increased, the removal efficiency of COD and SS in the waste water was increased based on the removal efficiency of COD and SS. The lime dosage and removal efficiency was increased proportionally with the lime concentration of 4,000 mg/l, but the increase of removal efficiency was presented slightly above the 4,000mg/l. It was evaluated that the removal efficiencies of COD and SS could be increased and the requirement of lime dosage could be decreased by the sea water supplement. The removal efficiency of SS was most increased when the sea water supplement was 10% or more in the waste water. The removal efficiencies of COD was the best at 4% sea water excepting the dilution efficiency by sea water supplement.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2011년도 추계학술발표회 논문집
• /
• pp.43-47
• /
• 2011

In woody waste separated from municipal solid waste, medium density fiberboard was major contributors with particleboard, paper, plywood and log, with different composition based on collected period. In chemical compositional analysis of woody waste, it was similar to softwood based on carbohydrate composition analysis. Based on the carbohydrate composition, saccharified solution from MWW could be good resource for biorefinery.

• 펄프종이기술
• /
• 제40권3호
• /
• pp.48-52
• /
• 2008

Waste paper plastic composites were prepared with old newspaper and old corrugated containers and mixed office waste and those properties were evaluated. The results were summarized as fellows. 1. The strength properties like as tensile and Young's modulus reveled most high level in MOW composite. 2. The coagulation of fibers in paper particle should interrupt equal dispersion of polymer and paper particle. 3. The micrograph of the surface of composites showed the most high dispersion in ONP composite.

• 펄프종이기술
• /
• 제44권6호
• /
• pp.58-69
• /
• 2012

As the meaning of dictionary terminology, scum refers to a layer of impurities that accumulates at the surface of a liquid. In papermaking process, scum indicates the floated solid waste generated by a flotation process during the primary wastewater treatment. In this study, different kinds of stocks and scums collected from newspaper, liner, tissue and fine paper were analysed in details. The purpose of this study was firstly to demonstrate the composition characteristics of different sources of scum, secondly the analysis of environmental hazardous materials, and thirdly the evaluation of reutilization ability of fibrous materials from collected scum. As mentioned the meaning of solid waste, scum was actually differ from the waste sludge in sources, compositions and recycling abilities. In the same manner of waste paper, the sludge which is generated within onsite of papermaking processes would be reused as a raw material. The general compositions of scum from waste water were mainly inorganic ash materials, fine fibre fractions, recycled fibre debries, and ink particles. If the scum is able to reuse as fibrous additives in papermaking process, it could contribute to the savings of running costs in both the subsidiaries of fibrous material and the solid waste treatment with even small quantity.