• 유기물자원화
• /
• 제17권3호
• /
• pp.91-99
• /
• 2009

본 연구에서는 하수슬러지와 사업장폐기물의 혼합소각을 위한 폐기물특성 및 운전특성을 살펴보고 향후 하수슬러지와 사업장폐기물의 혼합소각에 관한 기초자료를 제시하고자 하였다. 본 사업장폐기물은 플라스틱류가 42.55% 로 종이류(11.92%) 보다 3배 이상의 조성을 나타내었다. 하수슬러지와 사업장폐기물을 부피비로 3 : 7로 혼합한 폐기물의 삼성분은 수분함량이 16.3%, 가연분과 회분 함량은 각각 70.5%와 13.2%을 나타내었으며, 습윤저위발열량도 4,513kcal/kg으로 함수율 15%인 하수슬러지와 사업장폐기물(플라스틱류 약 43% 및 종이류 약 12% 함유)의 3 : 7 혼합소각이 가능할 것으로 예상된다. 혼합폐기물을 $700^{\circ}C$로 소각할 경우 SOx와 NOx 농도는 최소화할 수 있었으 나 다이옥신 등 유해가스 발생면에서 볼 때 $950^{\circ}C$로 소각하는 것이 더 바람직할 것으로 사료되며, 이를 위해서는 $Ca(OH)_2$의 적정사용이 검토되어야 할 것으로 판단된다.

• 자원리싸이클링
• /
• 제28권1호
• /
• pp.47-54
• /
• 2019

본 연구에서는 자원 재활용 및 생산비용 절감을 위해 폐기물을 국내 저급 철광석의 고품위 환원철(Direct Reduction Iron, DRI) 제조를 위한 보조연로로 사용하였으며, 폐기물이 환원철 제조에 미치는 영향을 알아보고자 한다. 석탄을 주연료 및 환원제로 사용하였으며, 폐기물을 보조연료로 사용하여 주연료의 대체 가능성을 확인하였다. 다양한 폐기물의 성상 및 발열량 분석을 통하여 연료 및 환원제로서의 가능성을 평가하였으며, 선별된 폐기물은 보조연료로 이용하여 반응온도 및 시간 제어를 통해 고품위 환원철을 제조하였다. 제조된 환원철은 금속화율 측정을 통해 산화철이 Fe 금속으로 환원이 잘 이루어졌음을 확인하였다. 환원철의 금속화율은 폐기물의 발열량이 높을수록 증가하는 경향을 보였으며, 특히 발열량과 휘발분 함량이 높은 페타이어와 폐비닐의 경우 $1,200^{\circ}C$에서 1시간 반응 조건에서 폐기물을 사용하지 않을 때 보다 더 높은 금속화율이 관찰 되었다. 고발열량의 휘발성 폐기물은 연료로써 우수한 물성을 가지고 있으며, 반응온도 및 시간의 최적화를 통해 고품위 환원철 제조를 위한 보조연료로 사용이 가능함을 확인하였다.

• 전기학회논문지
• /
• 제66권7호
• /
• pp.1131-1140
• /
• 2017

This study is concerned with a design methodology of optimized fuzzy clustering-based neural network classifier for classifying black plastic. Since the amount of waste plastic is increased every year, the technique for recycling waste plastic is getting more attention. The proposed classifier is on a basis of architecture of radial basis function neural network. The hidden layer of the proposed classifier is composed to FCM clustering instead of activation functions, while connection weights are formed as the linear functions and their coefficients are estimated by the local least squares estimator (LLSE)-based learning. Because the raw dataset collected from Raman spectroscopy include high-dimensional variables over about three thousands, principal component analysis(PCA) is applied for the dimensional reduction. In addition, artificial bee colony(ABC), which is one of the evolutionary algorithm, is used in order to identify the architecture and parameters of the proposed network. In experiment, the proposed classifier sorts the three kinds of plastics which is the most largely discharged in the real world. The effectiveness of the proposed classifier is proved through a comparison of performance between dataset obtained from chemical analysis and entire dataset extracted directly from Raman spectroscopy.

• 한국환경과학회지
• /
• 제24권1호
• /
• pp.9-15
• /
• 2015

Sustainable and eco-friendly polymers, natural polymers, bio-based polymers, and degradable polyesters, are of growing interest because of environmental concerns associated with waste plastics and emissions of carbon dioxide from preparation of petroleum-based polymers. Degradable polymers, poly(butylene adipate-co-terephthalate) (PBAT), poly(propylene carbonate) (PPC), and poly(L-lactic acid) (PLLA), are related to reduction of carbon dioxide in processing. To improve a weak mechanical property of a degradable polymer, a blending method is widely used. This study was forced on the component separation of degradable polymer blends for effective recycling. The melt-mixed blend films in a specific solvent were separated by two layers. Each layer was analysed by FT-IR, DSC, and contact angle measurements. The results showed that each component in the PPC/PLLA and PPC/PBAT blends was successfully separated by a solvent.

• 한국건설순환자원학회논문집
• /
• 제9권1호
• /
• pp.75-84
• /
• 2021

본 연구에서는 시멘트 제조공정에서 연료로 사용된 가연성 산업부산물 및 생활폐기물 대체연료 사용량과 시멘트 품질 중에서도 화학성분, 광물조성, 압축강도간의 상관관계를 확인하고자 하였다. 이를 위해 천연연료로서 유연탄, 대체연료로서 연질 플라스틱류(비닐류 등 풍력에 의해 비산되기 쉬운 성질의 플라스틱류), 경질 플라스틱류(이물질이 혼입되거나, 폐고무, PP 등 풍력에 비산되지 않는 성질의 플라스틱류), 재생유를 사용하는 국내 A시멘트 제조사 소성설비의 2017~2019년 3년간의 연료투입량을 독립변수로 하고, 시멘트 품질 데이터를 종속변수로 하여 요인 회귀분석을 이용한 분석을 실시하였다. 분석결과 대체연료의 종류 및 품질에 따라서는 화학성분(염소 및 LSF) 및 광물조성(f-CaO, C3S량)에 유의한 영향을 미치지 않았으며, 시멘트 압축강도를 저하할 것이라는 우려와는 달리 대체연료 사용량과 시멘트 압축강도간에 유의한 양의 상관관계가 성립하는 것으로 분석되었다.

• 자원리싸이클링
• /
• 제24권5호
• /
• pp.22-32
• /
• 2015

본 연구는 폐기저귀 재활용 공정 이후 회수되는 재생 자원의 가치를 높여 경제성을 확보하기 위한 관점에서 업사이클링 개념을 논의하고, 벤치마킹을 통해 펄프와 혼합 플라스틱의 업사이클링 방안을 수립하고자 하였다. 업사이클링은 원래의 물질이 다시 사용될 때 품질이 향상되고 폐기물을 질적 환경적으로 더 높은 가치를 가진 새로운 물질이나 제품으로 전환하는 과정으로 요약되며, 다양한 사례를 통해 용도를 다 한 제품이더라도 새로운 가치를 갖게 된다는 것을 알게 되었다. 그러나 기존의 업사이클링 사례들은 정성적인 디자인 요소를 통한 가치 창출이므로 정량적인 전략의 도출이 어렵고 업사이클링 완제품 시장 경쟁력에 대한 판단이 불확실하다. 따라서 본 연구에서는 활용성 차원에서 B2B 제품까지 범위를 확장하고, 재생펄프와 혼합 플라스틱 두 소재를 같이 활용할 수 있도록 업사이클링 방향성을 설정하여 이를 만족할 수 있는 제품군에 대해 분석하였다. 그 결과, 셀룰로오스 단열재로의 적용을 제안하며, 향후 국내/외 단열재 시장에서 고성능 셀룰로오스 비중이 약 3배 이상 급성장 할 것으로 예측되기 때문에 본 시장을 목표로 업사이클링 전략을 세워야 할 것으로 보인다.

• 콘크리트학회지
• /
• 제6권5호
• /
• pp.123-130
• /
• 1994

본 논문은 주변에서 손쉽게 구할수 있는 빈깡통과 플라스틱재등의 폐기물을 토목 및 건축구조물의 시공재료로서의 재활용과 부착성이 뛰어난 발포경질유레탄을 복합하여 중$\cdot$소 span의 교량에 대한 경량화를 꾀하기 위한 하나의 실험적 연구이다. 또한 기존의 현장 시공 단순화를 위해 강 콘크리트 합성 상판의 이미지와는 별도로 새로운 구조적 합리성과 재활용이라는 관점에서 연구된 것이다. 연구결과, 경질우탄 층내에 깡통을 봉입한 경우 저탄성계수인 우레탄이 변형을 흡수하기 때문에 소요의 구조특성을 확보하는 것이 가능하였고, 또한 경질우레탄의 존재로 강판 및 내부의 깡통에 방청효과와 응력전달에 유효하다는 것이 판명되었다.

• 한국가구학회지
• /
• 제27권2호
• /
• pp.80-90
• /
• 2016

The idea of Sustainable, first mentioned in "Our Future (Bruntdland)" from the United Nations report released in 1987 has been highly affect design disciplines in developed countries in 21st century. It relocated industrial society and structure's attentions to nature and recourse conservation and reuse. Designed and manufactured products eventually disposed and it leads to waste of resources as well as creates environmental issues. Unfortunately, vast majority of designers starts designing without anticipation of this matter and produce more believing this leads to more sales. However shorter life of a product will create bigger increase of resource consumption and waste than, importance of re-usage and recycle will eventually increase. In modern furniture industry metal and plastics are frequently used beside wood that material has been diverse than in past. However, there are lack of plans and regulations of re-usage of those material due to difficulties of separating each different materials and collecting due to it's size. This study would like to look into recycling rate, methods and usage of three major materials (wood, metal, plastic) that is typically used in current furniture industries. Furthermore, see the potential of sustainable furniture by analyzing furniture practices made by each different recycled material from old furniture and what designers should consider to achieve feasibility of sustainable furniture.

• 한국환경보건학회지
• /
• 제19권4호
• /
• pp.51-58
• /
• 1993

The integrated solid waste management for Seoul Metropolitan city can be established on the basis of the following hierarchy of priorities: 1. Efforts for source reduction should be propelled by both government and citizens to achieve the effects of resource conservation. The adequate production and consumption which are environmentally amenable and sustainable can be induced by the reasonable imposition of deposit money for waste treatment to one-time use products. To accomplish source reduction effectively, the induction of legal and institutional regulation of producer and consumer participation is requisite. 2. For resource recovery, wastes generated should be recycled as far as practicable. Community residents are responsible to separate discharge, the authorities concerned have responsibility of separate collection, and recycling industry should be assissted through tax reduction and financing. Resource separation facilities can be constructed at Kimpo Metropolitan landfill site for wastes not separately collected due to some unavoidable circumstances. 3. Garbage should be composted. Garbage is uneconomical for incineration, because it has high moisture content and low calorie, thus there is no reason for the incineration of garbage even though garbage is classified into combustibles. Composting facilities can be located at sites which are not densely populated and easily accessible to transportation, for example, Kimpo Metropolitan landfill site. Compost produced can be managed by the authorities for the use of fertilizer to a green tract of suburban land and farms. 4. Nonhazardous combustible wastes not recyclable can be utilized for thermal recovery at the incinerators which are completely equipped with pollution control devices. According to the trend of local autonomy and the equity principle of local autonomous entities, incineration facilities of minimal capacity required can be constructed at each districts of Seoul Metropolitan city which have organized local assembly. In case of Yangcheon district, the economically combustible waste quantity is about 260 tons/day which exceeds 150 tons/day, the incineration capacity of existing facility. But, from now on, waste quantity can be reduced substantially by the intensive efforts of citizens for source reduction and recycling and the institutional support of administrative organizations. Especially, it is indispensable for the government to constitute institutional and technological bases that can recycle paper and plastics form 43% of waste generated. A good time for constructing of incineration facilities for municipal solid waste can be postponed to the time that pollution control technologies of domestic enterprises are fully developed to satisfy the standards of air pollution prevention, because the life expectancy of Kimpo Metropolitan landfill site is about 25 years. Within this period, institutional improvements and technological advancements can be attained, while the air qual. ity of Seoul Metropolitan city can be ameliorated to the level to afford incineration facilities. 5. For final disposal, incombustibles and ash are landfilled sanitarily at Kimpo Metropolitan landfill site.

• 한국환경교육학회지:환경교육
• /
• 제3권1호
• /
• pp.130-140
• /
• 1992

The purpose of this study was to survey the trends of waste products in schools, its gathering and disposal, identification of problems and to analyze its disposal. Moreover, this study was aimed at basic suggestions about the establishment and plans of waste environmental education. 98 public primary and secondary schools were surveyed in Seoul during the month of March and April, 1991. Information was collected from each educational association by random sampling. Questionaries were used for this survey. To understand the disposal status of school waste and its reforms, this study surveyed the amount of waste by products, their origin and analyzed the disposal by type, one number of schools and teachers involved. The dump sited and disposal methods of school waste, its problems, and the status of school waste educations were researched, and ideal disposal methods and plans for waste education were suggested. The results were as follows. 1. The School's trash was produced by followings: paper, vinyle plastics, food, woods, metals, ceramics, glass, bottles, and ash from the heating system. The biggest cause of the school's waste as shown by the survey was a lack of environmental awareness(39.8%). The second biggest was the use of a one time use of disposable paper products(27.6%). 2. Waste collection by different grade levels were proven to be important but as you move from elementary to high school, the waste collecting operation decreased, in this connection between the students and waste collection itself it was significant on the other hand the teachers were not working as significant variables. 3. Of the school that collected waste 69.5 percent of the schools separately grouped common waste and recyclable waste. 25 schools(42.4%) received improvement on their environmental awareness of trash collection through this method. 4. From the number of disposal sites in surveyed schools, it was determined that the education of the necessity for separation of waste was performed in vain and accordingly the should require a real education in the future. 5. Regarding the method of disposal of waste the survey indicated that the #1 method of disposal was partial burning and the remains carried to a dump site by others(35,7%). In elementary schools the entire waste was taken by individuals to a dump site (33.3%). In high schools partial burning and then transported by individuals #1 in our survey(50%). 6. Relative to the problem of the treatment to waste, the emission of smoke from the burning was considered to be the #1 priority in our survey (62.3%) the problem of trash collection being delayed was 52.1%(1in our survey). 7. The present situation of environmental education of waste us lacking. Under present circumstances, the practice of public announcements for improvement and waste-paper collection has been going on vigorously but lacking in education as to the preparation of compositions for students the themes of public exhibitions, the organizing of voluntary associations should be part of the education system to reinforce student's awareness of proper waste disposal. 8. The most economical alternative for disposal was recycling usable waste or combustible material through a variety of education we can therefore educate students bring this education to their homes public servants will also be able to benefit in the waste disposal process with proper education. In conclusion we should intensify the systemical organization and the education of our waste disposal for a better environment.