• 한국연소학회:학술대회논문집
• /
• 1998.10a
• /
• pp.1-8
• /
• 1998

Waste combustion above a grate is the core process of incineration systems, stability of which should be guaranteed for emission minimization. However, complicated reactions and heat and mass transfer phenomena make understanding the process difficult. One dimensional bed combustor with a numerical combustion model is utilized to investigate the combustion process of the bed, using cubic wood particles as a simulated fuel. Bed combustion behavior is characterized with apparent flame propagation speed, which has close relationship with air supply rate and chemical and physical characteristics of the fuel. Base on the availability of oxygen, two distinct reaction zone is identified; the oxygen-limited and the reaction-limited zone leading to the extinction by excessive convection cooling. The numerical modeling shows good agreement with the experimental results. The transient bed combustion behavior of local temperature and oxygen consumption rate is adequately reproduced. The numerical model is extended to model the waste bed combustion of a commercial incineration plant, which shows meaningful results as well.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.186-193
• /
• 2009

Since its opening in 1992, Sudokwon Landfill has become a landfill in which wastes generated from more than 22 million people are treated and disposed of. Its first phase landfill was closed in 2000 and the second phase landfill is in operation since then. The Korean environmental policies on refuse have drastically evolved for the last decade or so. From merely safe containment of wastes, the utilization of them as a source for energy generation and the minimization of waste volume to be filled in landfills are in the mainstream. Keeping in pace with the new trends, several challenging projects are in their way to blossom in Sudokwon Landfill. This paper briefs some important activities in the landfill. They are (1) geotechnical issues related to the construction and maintenance of the $1^{st}$ and $2^{nd}$ Landfills and (2) landfill gas and bioreactor which are recently emerging in the market.

• Journal of the Korean Society of Industry Convergence
• /
• v.15 no.3
• /
• pp.83-86
• /
• 2012

This study have cross checked the change of internal sludge-recycle in Full-scale Anaerobic-Digestion, and researched about not only the improvement of Bio-gas production from the digested sludge but also the efficient method of sludge minimization. Ultimate aim of the study is to reduce the amount of sludge by the improved efficiency of contact with the organic-matter and the microbes in Anaerobic-Digestion. The sludge-recycle fluidized sludge layer and raised the activity of the sludge, The sludge-recycle ratio of optimum was 500%, VS and COD removal ratio respectively appeared with 67.8% and 70.4%. Through these result of this study, it may be positive view to treat waste sludge by the sludge-recycle ratio in terms of minimization and circulation of resources.

• YAKHAK HOEJI
• /
• v.53 no.2
• /
• pp.93-100
• /
• 2009

Most of families in Korea keep some medicines that has been expired or not been used for a long time, and these medicines could be causing environmental or social problems. Currently many people concerned about their health and therefore show a tendency to visit many health facilities. It eventually brings to remain more medication in home The aim of this study is to determine the drug waste minimization and drug disposal in Korean home and provide the proper guideline for them. This study were performed by visiting total randomly selected 140 homes at the Seoul area from July 23rd, 2008 to July 31st, 2008 by questionnaire. This survey comprised total 6 parts and total 22 questions. In results, 77 (55.0%) among 140 families answered to this survey. 89.6% of families keep unused medicine in the home. Most were tablet (66.3%) and syrup (19.2%) dosage type. They usually kept the unused medicine in the room (41.6%) or no certain place. 76.6% families reused the medicine and used for themselves. The reason for reuse is similar symptoms by their decision. The reason for medicine was left over is not following the prescription's direction (31.3%). They mostly dispose the unused medications by throwing into a trash can (71.4%). In conclusion, many families keeps unused medication and it could cause health and environmental problems.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.15 no.4
• /
• pp.355-367
• /
• 2017

The decommissioning of Kori unit 1, which was permanently shut down in June of 2017, will be the first instance of the dismantling of a commercial nuclear power plant in Korea. The disposal of waste during the dismantling process accounts for a large part of the total decommissioning cost. Therefore, structures consisting of activated and contaminated concrete must be economically and safely dismantled by establishing a proper dismantling strategy. This study focuses on optimized dismantling and disposal scenarios pertaining to a biological shield. Several dismantling cases, regulations and technologies related to waste treatment as these practices pertain to nuclear power plants are analyzed. To minimize the amount of waste from the biological shield dismantling process, an optimized dismantling scenario is presented and disposal alternatives for dismantled concrete waste are proposed.

• Journal of Animal Environmental Science
• /
• v.1 no.1
• /
• pp.83-102
• /
• 1995

Composting is an ecologically sound method of recycling organic waste. Its advantages include the maintenance of soil fertility and improvement of soil physicochemical property. It is an essential part of the waste minimization. That is, composting should be included to increase the recycling rate up to more than 20%. To encourage composting of waste, it is necessary to develop some effective composters of small scale facilities and densely populated areas. For medium and large-size facilities, the optimum process should be selected. Technical counselling and support is desirable for small scale composters for urban residential and rural area. On the other hand, adequate amendment of relevant legislation should be followed to encourage composting. An example of unreasonable legislation is the current fertilizer management act. According to the regulation, the maximum allowable limit of lead in the compost is less than 150ppm, which is too strict. This limit should be increased to at least 300ppm, which is the observed level in most states in USA. At the same time, sound infrastructure should be established and decent publicity work should be achieved to accelerate composting activity. In this paper the desirable standard for some heavy metal concentration in the compost were suggested.

• Nuclear Engineering and Technology
• /
• v.55 no.1
• /
• pp.52-62
• /
• 2023

Various decontamination technologies have been developed for removing contaminated areas in industries. Although it is important to consider parameters such as safety, cost, and time when selecting the decontamination technology, till date their comparative study is missing. Furthermore, different decontamination technologies influence the decontamination effects in different ways. Therefore, this study compares different decontamination techniques for the steam generator using a multicriteria decision-making method. A steam generator is a large device comprising both low- and very low-level waste (LLW, VLLW) and reflects the difference in weights of the standards according to the classification of the waste. For LLW and VLLW decontaminations, chemical oxidizing reduction decontamination (CORD) and decontamination grit blasting were used as the preferred techniques, respectively, considering the purpose of decontamination differs based on the initial state of waste. An expert survey revealed that safety in LLW and waste minimization in VLLW exhibited high preference. This evaluation method can be applied not only to the comparison between each process, but also to the creation of process scenarios. Therefore, determining the decontamination approach using logical decision-making methods may improve the safety and economic feasibility of each step in the decommissioning process and ensure a public acceptance.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.19-23
• /
• 2001

In addition to landfilling and incineration, waste minimization and recycling have become priorities in Taiwan's municipal waste management strategies over the past 10 years. Major recycling initiatives being implemented in Taiwan include producer responsibility, "pay-as-you-throw, " and mandatory sorting provisions. Currently, the producer responsibility regime established under the Waste Disposal Act and administered by the Environmental Protection Administration (EPA) requires that manufacturers or importers of listed items, including containers, batteries. cars, motorcycles ("scooters"), tires, oil, televisions, refrigerators, air conditioners, washing machines, computers, and printers, pay recycling fees to government recycling funds. EPA then uses the recycling funds to subsidize collection and recycling. The 2001 recycling fund budget totals NT$57 billion (NT$35 = US$l). Under the producer responsibility regime, EPA-designated retailers ("sellers") must accept end-of-life items returned to them by the consumers. At the local level, Taipei City implements a pay-as-you-throw program, whereby citizens pay waste collection and treatment fees through the purchase of special trash bags approved by the Taipei City Government. However. recyclables that are separated by citizens are collected free-of-charge by the City. Taichung City and Kaohsiung City, on the other hand, enforce mandatory sorting schemes, whereby citizens face penalties if they don't separate recyclables from the trash before pick-up. These programs have resulted in a significant reduction in municipal waste. Per capita waste collected per day has dropped from 1.143 kg in 1997 to 0.978 kg in 2000. Targeting a 10% recycling rate for municipal waste in 2001. EPA plans to research and develop new recycling techniques, expand the scope of producer responsibilities, and strengthen existing municipal recyclable collection programs. To this end, among other initiatives, EPA has prepared a draft "Resource Recycling and Reuse Act" that would complement the existing producer responsibility programs by incorporating into the current recycling framework the concept of product life-cycle management.

• Nuclear Engineering and Technology
• /
• v.43 no.4
• /
• pp.329-334
• /
• 2011

Two conceptual flowsheets were developed for recycling used nuclear fuel. One flowsheet was developed for recycling used oxide nuclear fuel from light water reactors while the other was developed for recycling used metal fuel from fast spectrum reactors. Both flowsheets were developed from a set of design principles including efficient actinide recovery, nonproliferation, waste minimization and commercial viability. Process chemistry is discussed for each unit operation in the flowsheet.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10a
• /
• pp.359-362
• /
• 2000

From a practical perspective, sustainable development requires the optimization of current natural resources and the minimization of derived wastes. A major concern with respect to sustainable infrastructure development is the continued depletion of easily-available natural resources and environmental matters are more serious, the concerned about waste materials which are inevitably produced in the manufacturing of the product is getting worse. These wastes must be handled and properly disposed, and many times, although this waste may be environmentally inert, it has been discarded in landfills. But current disposal methods of these by-products create not only a loss of profit for the power industry, but also environmental concerns the breed negative public opinion. therefore, this study evaluates the ECO artificial aggregate and bricks were designed and tested for the end use of fly ash.