• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.6
• /
• pp.453-457
• /
• 2016

In various industrial plants such as power generation plants, petrochemical plants, and unit factories, there is an increasing demand for a system that generates hot water using waste or surplus steam. Compact steam unit (CSU), which produces hot water by using steam, is a good solution considering energy reuse. In this study, as a basic study to develop a high-pressure CSU, heat transfer characteristics of a hybrid heat exchanger were investigated through experiments, in order to use the hybrid heat exchanger instead of a conventional plate heat exchanger as the core component of CSU. The experimental results are the followings. Heat balance between the hot side and cold side was satisfied within ${\pm}5%$. Overall heat transfer coefficient increased linearly as the Reynolds number increased and exceeded $5,524W/m^2K$ when the flow velocity was above 0.5 m/s. In addition, pressure drop also increased as the Reynolds number increased, and pressure drop per unit length was below 50 kPa/m.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.5
• /
• pp.419-427
• /
• 2018

The purpose of this study is to recycle steel slag generated from the iron producing process and to use steel slag as a construction material which is currently landfilled Steel slag is subjected to aging treatment due to the problem of expansion and collapse when it reacts with water. The Slag Atomizing Technology (SAT) method developed to solve these problems of expanding collapse of steel slag. In this study, experimental study on the emergency repair mortar using the reducing slag, electric arc furnace slag and silicon manganese slag manufactured by the SAT method is Reduced slag was shown an accelerated hydration when it was replaced with rapidly-setting cement, and the rate of substitution was equivalent to 15%. It is shown that the electric furnace oxide slag is equivalent to 100% of the natural aggregate, and it can be replaced by 15-30% when the silicon manganic slag is substituted for the electric furnace oxide slag. With the above formulation, it was possible to design the rapidly repair mortar for road use. These recycling slags can contribute on achieving sustainability of construction industry by reducing the use of cement and natural aggregates and by reducing the generation of carbon dioxide and recycling waste slag.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.2
• /
• pp.155-162
• /
• 2020

Since the third industrial revolution has been started in the 1980s, the form of buildings has been varied and atypical by the development of building technology. Such free-form building has a curved shape unlike the existing standard buildings, and to realize this, it is necessary to manufacture the free-from panel. The shape of the free-form panel must satisfy a limited error ratio compared with the design shape, and the technology to produce free-form panels is very difficult. However, there are many problems such as enormous cost and construction waste generation when implementing free-from construction. Therefore, the development of free-form panel manufacturing technology should be made to solve the problems caused by the free-form construction. In this study, the error rate analysis of the mixed mortar panel was conducted by selecting the proper mixing ratio of the mixed mortar for the shape of the free-form panel.

• Journal of Energy Engineering
• /
• v.21 no.2
• /
• pp.133-137
• /
• 2012

Among various clean energy technologies, the solar energy technology has been widely used in various fields such as photovoltaic power generation and solar water/space heating. These days, special attention is drawn on its conversion into acoustic energy along with waste heat as a means to promote clean energy utilization. This work was carried out to investigate the possibility of converting solar energy into acoustic waves, especially, its performance characteristics for a single resonance tube (20.2 mm in ID). Variations are made for the stack length and its position as well as power supply. For a resonance tube of 200mm, an average sound pressure of 114.5 dB was measured with a stack length of 25.6mm at 5cm from the closed end. When the power supply was increased to 35W, an average sound pressure of 117.29 dB was detected with a frequency of 500Hz. There was an increase in frequency, 630 Hz (115.7dB), with a shorter resonance tube of 150mm.

• Journal of Energy Engineering
• /
• v.19 no.4
• /
• pp.221-227
• /
• 2010

In this study, we consider gas generation characteristics on pyrolysis of eco-fuel which were made by mixing of Pitch Pine and Lauan sawdust as biomass and polyethylene, polypropylene, polystyrene as municipal plastic wastes with catalyst in fixed bed reactor. From the result of higher heating value(HHV) measurement and of ultimate analysis, the heating value of plastic wastes and a hydrogen content in plastic sample are higher than biomass. An activation energy was reduced by a catalyst addition. However the catalyst content influence over 5 wt% was insignificant. The yield of hydrogen from gasification of biomass containing plastic wastes such as polyethylene, polypropylene and polystyrene were obtained higher than that of sole biomass. The high temperature and mixture ratio of catalyst conditions induced to high hydrogen yield in most of the samples. As the influence of catalyst, the hydrogen yield by catalytic reaction was higher than non-catalytic reaction. We confirmed that Ni-$ZrO_2$ catalyst is more active in increasing the hydrogen yield in comparison with that of carbonate catalyst. The maximum hydrogen yield was 65.9 vol.%(Pitch Pine / polypropylene / 20 wt.% Ni-$ZrO_2$(1:9) at $900^{\circ}C$).

• Applied Chemistry for Engineering
• /
• v.23 no.3
• /
• pp.259-265
• /
• 2012

Differently from fly ash, the bottom ash produced from thermal power generation has been treated as an industrial waste matter, and almost reclaimed or was applied with the additive of the part concrete. Bottom ash has various problems to use with the aggregate. Bottom ash is lighter than typically the sand or the gravel and it's physical properties (compressive strength etc.) is somewhat low because of high absorptance. In order to manufacture the ash concrete, we used a bottom ash as a main material and a pure sulfur as a binder. In this study, fundamental research methods that vary the grain-size of bottom ash and the ratio of sulfur vs ash were investigated to improve the quality of ash concrete such as compressive strength. Bottom ash in this research which occurs from domestic 4 place power plants, was checked physical and chemical properties. The compressive strength seems the result which simultaneously undergoes an influence in content of the sulfur and Bottom ash grain-size. We got the result of the maximum 92 MPa. The compressive strength was high result for grain size below 1.2 mm and high sulfur content.

• Clean Technology
• /
• v.4 no.1
• /
• pp.45-59
• /
• 1998

Continuous immobilized-cell culture was carried out for the production of kasugamycin, a secondary metabolite by a filamentous bacteria, Streptomyces kasugaensis, with an intention of reducing waste generation. A sporulation medium was developed for production of bulk amounts of spores, and the spores were entrapped into celite biosupports for immobilization. It was possible to effectively keep the immobilized-cells inside the reactor during the continuous culture by an efficient immobilized cell separator of decantor type on the outlet of the fermentor. Using this continuous immobilized-cell fermentor system, we investigated the effects of feed substrate and phosphate concentrations on kasugamycin production and chemical oxygen demand(COD). Comparing with the conventional suspended-cell batch culture, the kasugamycin productivity was observed to increase by 2.5 times, whereas COD per unit kasugamycin production decreased by 2.3 times in the continuous immobilized-cell culture. Based on these results, the continuous immobilized-cell system was considered to be a cleaner bioprocess than the conventional batch suspended-cell system.

• Clean Technology
• /
• v.26 no.2
• /
• pp.91-95
• /
• 2020

A new eco-friendly synthetic method for N-hydroxysuccinimide (NHS), widely used in the pharmaceutical and fine chemical industries, is developed. Conventional synthesis method yields NHS of about 70% after its reaction with NH₂OH to succinic acid. In this method, NHS can be obtained using low-cost succinic acid, but a great deal of solvents are required as an extraction method to purify NHS, while the work-up process is complicated, resulting in low yield. In addition, there is a safety risk due to the high reaction temperature for commercial production, and it is not economical due to the high cost of production from the generation of much waste because of an acid catalyst and the use of various solvents. In order to make up for this shortcoming, this study used succinic anhydride as a raw material under low temperature reaction and developed a new eco-friendly industrial synthesis method using isobutyl alcohol for a single solvent and non-catalytic reaction. The economic evaluation confirms that there is a cost reduction effect of about 20%. In the future, based on this result, studies may establish a commercial production technology through scale-up research and proceed with foreign technology transfer.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.5
• /
• pp.494-500
• /
• 2006

Life Cycle Assessment(LCA) is an environmental assessment tool for evaluating environmental burdens associated with products, processes and activities from the raw material acquisition stage to the end-of-life stage. End-of-life stage as well as other processes requires a reliant database in order to increase the confidence in the LCA results. In this study, the flow of Personal Computer(as PC) in the end-of-life stage was examined and the database of two scenarios has been established, i.e. one is part reuse and the other is no part reuse, in the end-of-life phase of PC. Also, key environmental issues were identified by carrying out LCA on a PC in the end-of-life phase for eight environmental impact categories. The 'ozone layer depletion' contributes the highest environmental impact due to generation of $Cl_2$ gas during the incineration of waste plastics. In addition, the scenario 1(part reuse) is more environmentally sound than the scenario 2(no part reuse) when comparing two scenarios.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.12
• /
• pp.9-16
• /
• 2005

A new online routing algerian is proposed in this paper, which use the interference-prediction to solve the network congestion originated from extension of Internet scope and increasing amount of traffic. The end-to-end QoS has to be guaranteed in order to satisfy service level agreements (SLAs) in the integrated networks of next generation. For this purpose, bandwidth is allocated dynamically and effectively, moreover the path selection algorithm is required while considering the network performance. The proposed algorithm predicts the level of how much the amount of current demand interferes the future potential traffic, and then minimizes it. The proposed algorithm considers the bandwidth on demand, link state, and the information about ingress-egress pairs to maximize the network performance and to prevent the waste of the limited resources. In addition, the interference-prediction supports the bandwidth guarantee in dynamic network to accept more requests. In the result, the proposed algorithm performs the effective admission control and QoS routing. In this paper, we analyze the required conditions of routing algorithms, the aspect of recent research, and the representative algorithms to propose the optimized path selection algorithm adequate to Internet franc engineering. Based on these results, we analyze the problems of existing algorithms and propose our algorithm. The simulation shows improved performance by comparing with other algorithms and analyzing them.