• Journal of Life Science
• /
• v.16 no.2 s.75
• /
• pp.289-296
• /
• 2006

In order to establish highly efficient gene transfer condition at early stage of soybean transformation, various experiments were performed and compared their efficiencies by transient GUS analysis; those conditions are genotype determination of Korean soybean cultivars for amenability to Agro-infection, appropriate agar and selective agent concentration, orientation of explant placement, hormone pre-culture, and liquid selection condition. In the genotype screen of Korean soybean varieties, 14 amenable genotypes were selected. For efficient Agrobacterium washing, cefotaxime was chosen and hygromycin at the concentration of 10 and 15 ppm was used as selection agent in the media. Agar concentration was slightly better in 0.6% and 0.8% for both shoot and callus formation, and explant placement with adaxial side down showed high frequency of GUS expression. For wounding treatment, oriental needle was efficient than scalpel for shoot formation and gene transfer. To increase the frequency of gene transfer, hormone pre-treatment was applied. BA at the concentration of 5 and 10 ppm resulted in better survival at the late stage of selection in shoot elongation media. Selection in liquid media after hormone pre-treatment seemed to be effective to remove the escaped non-transformants at early stage of procedure. Considering the results obtained, Eunhakong could be the first choice as a material for soybean transformation among Korean soybean genotypes.

• Korean Chemical Engineering Research
• /
• v.58 no.1
• /
• pp.84-91
• /
• 2020

The efficiency of the synthetic magnesium silicate used in basic polyols and edible oil purification is evaluated by its purification ability and filtration rate and is affected by the particle size and surface area of magnesium silicate. In this study, it was investigated the change on the particle size of magnesium silicate was influenced by the reaction temperature, injection rate, injection order (Si, Mg) and Mg/Si reaction mole ratio. The synthesized magnesium silicate was compared and analyzed for the synthesis, grinding, and refining processes. In the synthesis process, the reaction temperature and feed rate did not affect the average particle size change of magnesium silicate, while the reaction molar ratio of Mg / Si and the order of injection acted as main factors for the change of average particle size. The average particle size of magnesium silicate increased by 8.7 ㎛ from 54.4 ㎛ to 63.1 ㎛ at Mg injection when Mg molar ratio increased from 0.125 to 0.500, and increased by about 4.8 ㎛ from 47.3 ㎛ to 52.1 ㎛ at Si injection. The average particle size according to the order of injection was 59.1 ㎛ for Mg injection and 48.4 ㎛ for Si injection and the difference was shown 10.7 ㎛, therefore the filtration rate was about 2 times faster under the condition of Mg injection. That is, as the particle size increases, the filtration time is shortened and washing filtration rate can be increased to improve the productivity of magnesium silicate. The cake form of separated magnesium silicate after filtration becomes a solid through drying process and is used as powdery adsorbent through the grinding process. As the physical strength of the dried magnesium silicate increased, the average particle size of the powder increased and it was confirmed that this strength was affected by the reaction molar ratio. As the reaction molar ratio of Mg / Si increased, the physical strength of magnesium silicate decreased and the average particle size after grinding decreased by about 40% compared to the average particle size after synthesis. This reduction of strength resulted in an improvement of the refining ability due to the decrease of the average particle size and the increase of the amount of fine particle after the pulverization, but it resulted in the decrease of the purification filtration rate. While the molar ratio of Mg/Si was increased from 0.125 to 0.5 at Mg injection, the refining ability increased about 1.3 times, but the purification filtration rate decreased about 1.5 times. Therefore, in order to improve the productivity of magnesium silicate, the reaction molar ratio of Mg / Si should be increased, but in order to increase the purification filtration rate of the polyol, the reaction molar ratio should be decreased. In the synthesis parameters of magnesium silicate, the order of injection and the reaction molar ratio of Mg / Si are important factors affecting the changes in average particle size after synthesis and the changes of particle size after grinding due to the changes of compressive strength, therefore the synthetic parameter is an important thing that determines productivity and refining capacity.

• Journal of the Korean Society of School Health
• /
• v.5 no.2
• /
• pp.74-90
• /
• 1992

The purpose of this study is to know the effects on school lunch service programme of elementary school in rural area, by using the group consisting of the sixth year students in the schools that have provided them with the lunch for six years or longer(male student:312, & female student:324), while using the comparing group consisting of the sixth year students in the schools that have not provided them with the school lunch under their similar living condition(male student: 306 & female student:322). In addition, this study was carried out by examining all continued information about their height and weight shown in the developmetal record for six years from the 1st to 6th year, and by checking their eating habits on the basis of questionnaires. The result of this study is summarized as follows. As the result of comparing the values of their height and weight grown for 6 years, it was shown that the height of the male group provided with school lunch is 27.8 cm while the male group without lunch is 27.1 cm. And the female group provided with school lunch indicated the growing value of 29.9 cm while the group without lunch did 28.4 cm. Then, it appeared that both male and female groups provided with school lunch show higher growing values of 0.7 cm, respectively, and 1.5 cm than these groups without lunch. Also, the weight of the group without lunch was 14.8 kg. Moreover, the weight of the female group provided with school lunch was 16.9 kg while the group without lunch was 17.2 kg. Then, it was shown that the male group provided with school lunch indicates heavier growing value of 0.9 kg than the group without lunch while the female group without lunch does heavier value of 0.3 kg than the group provided with school lunch. It's figure showed that although this distribution according to percentile in the 1st year is similar to the standard regular curve it is positioned in the upper group(more thatn 70%) divided centering around 50% in the 6th year, of which distribution of children provided with school lunch was higher. When comparing the values of physical status in the 6th year, it was also shown that male children with school lunch are better than these children without lunch in jumping, throwing, chinning and lifting while female children are better than these children without lunch only in jumping, which were a significant difference. In addition, the group provided with lunch showed distribution of the higher physical grade. The result of analysis on their breakfast indicated that the children with every morning breakfast account for 67.6% of the group provided with school lunch while the group without lunch for 57.8%. Regarding the reason that they do not have the breakfast, the group with school lunch answered "Because of habits"(50.7%) while the group without lunch did "Because they have no appetite"(58.9%). When comparing the degree of preference for hot or salty food, it was apparent that these children with school lunch generally tend to prefer less hot or sailty food. With respect to the frequency and place of their eating between meals, it was shown that about 70.0% of both groups has the eating between meals, more than one time a day. Then, the group with school lunch had the eating between meals at home(45.2%) while the group without lunch did it in the process of returning to home(48.4%). Regarding the degree of their preference for a certain food, it was shown that more children of the group with school lunch do not prefer a food to others. Also, their eating attitude indicated that such children as eating the food with chat after completely swallowing food and with T.V watching are larger and lower among the group with school lunch, which showed a remarkable defference from the group without lunch. With respect to their sanitary habits such as hand washing and toothing, these children who always wash their hand before eating, accounted for 84.4 % of the group provided with school lunch while the group without lunch did for 63.6%, of which the female group with school lunch indicated a remarkable difference. The actual condition of their nutrition education showed that these children who answered "Received this education" accounted for 78.0% of the group with school lunch while the group without lunch accounted for 57.5%.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.9
• /
• pp.970-977
• /
• 2005

The commercial $V_2O_5-WO_3/TiO_2$ catalysts which had been exposed to the off gas from incinerator for a long time were remanufactured by washing with distilled water and arid solution and reimpregnation with catalytic active components($V_2O_5-WO_3$). The catalytic properties and NOx conversion reactivity of those catalysts were examined by analysis equipment and NOx conversion experiment. Under the experimental condition used in this study, the remanufactured catalysts activated by distilled water ultra sonic cleaning, the catalytic activity was recovered in the range of $66{\sim}93%$ of that of the fresh and the maximum activity was showed when the ultra sonic cleaning time was more than 3 minutes. The remanufactured catalysts by acid solution ultra sonic cleaning, the catalytic activity was recovered in the range of $81{\sim}97%$ of that of the fresh catalyst and the maximum catalytic activity was shooed when the pH of the acid solution was 5. The remanufactured catalysts by reimpregnation with $V_2O_5$ and $WO_3$, the catalytic activity was recovered in the range of $87{\sim}100%$ of that of the fresh catalyst. Maximum catalytic activity was showed when the $V_2O_5$ was reimpregnated more than 1.0 wt %. In this case, the catalytic activity was recovered 97% of that of the fresh catalyst especially at the $150^{\circ}C$ of the experimental temperature.

• Microbiology and Biotechnology Letters
• /
• v.37 no.3
• /
• pp.231-237
• /
• 2009

This paper aimed to develop a solvent extraction and purification process to recover high-purified ${\beta}$-carotene from recombinant Escherichia coli. Cells harvested from the culture broth were treated through numerous steps: dehydration, solvent extraction, crystal formation and separation. To optimize the extracting condition, experiments were carried out to investigate the effect of cell disruption, temperature, organic solvents, solvent-biomass ratio on the yield of ${\beta}$-carotene extracted from cells. The result indicated that no significant differences of extraction yield were observed from cells with or without step of cell disruption. Among different extracting solvents, the highest extraction yield of ${\beta}$-carotene, 30.3 mg-${\beta}$-carotene/g-dry cells, was obtained with isobutyl acetate at solvent-biomass ratio 25 mL/g-dry cells at $50^{\circ}C$. Notably, in case of acetone, the extraction yield was quite low when using acetone itself, but increased almost up to the highest value when combining this solvent and olive oil. The purity of ${\beta}$-carotene crystals obtained from crystallization and separation was 89%. The purity degree was further improved up to 98.5% by treating crude crystals with additional ethanol washing.

• Korean Journal of Food Science and Technology
• /
• v.28 no.5
• /
• pp.841-849
• /
• 1996

Quality changes in carrot during storage were studied to investigate the efficiency, cooling properties and the washing and storage effects of hydrocooling method. As a result of plotting the nondimensionalized carrot temperature versus cooling time, its cooling rate coefficient was shown $-0.0171min^{-1}{\sim}-0.0121min^{-1}\;(R^{2}=0.99{\sim}0.95)$, and $-0.141min^{-1}{\sim}-0.0038min^{-1}\;(R^{2}=0.98{\sim}0.92)$ in package condition7. Rate of weight loss and change in moisture content of carrot were not significantly different by treatment conditions during storage at $5^{\circ}C$. During storage at $15^{\circ}C$, however, weight loss of hydrocooled carrot was lower than that of non-treated carrot from the 30th to 40th day. Especially, PE was more effective than tray for packaging hydrocooled carrots. Carrot pretreated wish sterilizing agent, packed with PE vinyl film and with residual water removed after hydrocooling showed a lower decaying-rate than any other carrots. Changes in Hunter L and b values of hydrocooled carrot were slower than those of non-treated one. The carotenoids contents of stored carrot $(0.736{\sim}0.780mg%)$ decreased to $9{\sim}43%$ after 40 days of storage at $5^{\circ}C$ and before 20 days of storage at $15^{\circ}C$. It could be presumed that the addition of sterilizing agent reduced the initial level of overall microbial and coliform counts and their growth rate during storage.

• Journal of Food Hygiene and Safety
• /
• v.2 no.3
• /
• pp.109-119
• /
• 1987

This Study was conducted to provide fundamental data necessary for the improvement of milk quality. Milk quality was evaluated by 3 methods; milk fat percent measurement, methylene blue reduction test (MBRT), and somatic cell count measurement. At the same time, condition of hygienic management of dairy facilities and cows was investigated in each of 234 dairy farms located in Gyunggi area from May, 1986 to April, 1987. The results were as follows 1. Average milk fat percents among farms were 3.67%, 3.64%, 3.43%, 3.48% in January, April, July and October, respectively. The diUerences of milk fat percent from month to month were statistically significant (p<0.005). and the seasonal average was 3.56%. 2. Numbers of farms which produced bulk milk of first grade by MBRT were 153(65.4%), 157(67.1%), 76(32.5%) and 141(60.2%) in January, April, July and October, respectively. The diUerences among months were statistically significant (p<0.005). Also, significant diUerences of grade by milking quantity (p<0.05), presence of milk cooler (p<0.01), and collection means (p<0.05) were demonstrated. 3. Number8 of farms which produced bulk milk of fir8t grade in somatic cell count measurement were 227(97.0%), 226(96.6%), 218(93.2%) and 223(95.3%) in January, April, July and October, respectively. And diUerences of grade by the pratice of teat dipping, dry cow therapy and manner in which udder washing towel was used statisticaJJy 8ignificant (p<0.01).

• Journal of the Korean Institute of Landscape Architecture
• /
• v.41 no.6
• /
• pp.72-83
• /
• 2013

This study suggests the necessity of landscaping alternatives for the succession of Takjok(濯足) culture by considering the background and meaning of Takjok's cultural phenomenon shown in old literatures and paintings and its result is as follows. An old idiom, 'Takyoung Takjok(濯纓濯足)' implying a disinterested living attitude from the mundane world and an attitude complying with nature, has been sublimated to 'Takjokjiyu(濯足之遊)' which means living in comfortable retirement through life in seclusion(隱逸). Classical scholars immerse their feet in soft-flowing(柔軟) water for 'Mulailche(物我一體; synchronized with nature)' which is a unified condition with 'Do(道; truth)' and connected to the stage of 'Yu(遊)', a free mental state, and its nature. The cultural phenomenon of Takjok appeared in the inherited landscape paintings in the Joseon dynasty period after the late stage of Koryo. Takjok shown in 'Pal Kyung Shi'(八景詩; poetry singing for the eight scenary) was described as not a transcendent scene, but as a scenery of daily life. Dense forest and water, such as a stream with clean water, rocks, and pine trees shown in Takjok paintings have been symbolized as a seclusion space for classical scholars with higher thinking and their mental states have been more emerged. Mental pleasures called as seclusion and Takjokjiyu have been relatively emphasized in the Takjok paintings of the Joseon Dynasty period contrary to the Chinese Takjok paintings emphasizing Chung Gye(淸溪; clean stream) and Chang Rang(滄浪; high and clean wave) and strongly representing the image of 'Chung Ryu'(淸流; clean flowing water) and the veneration for antiquity. The view of nature described in the Takjok paintings represents the provision of nature as a situation and attitudes of classical scholars and implies a Taoism perspective which describes the 'do' of nature. This view of nature itself remained intact(無爲自然) with the love of mountains and water, showing a side of the zeitgeist and aesthetic consciousness of China and Joseon. The 'Takjokjiyu' of both countries has be interpreted as a symbol of personality development, behavior, life in seclusion, or transcending the mundane world and has also been accepted as a method of summer vacation in the real world. It should be considered that Takjok includes ordinary people's wisdom to resist the hot weather, as well as the classical scholar's ideal and the veneration of antiquity. From this perspective, water space, Takjok rocks, and the use of water based on the environmental supportability should be newly focused as a recreational space and it reminds us that the spirit of Takjok is a classical mental healing method.

• Journal of Food Hygiene and Safety
• /
• v.30 no.2
• /
• pp.159-165
• /
• 2015

The aim of this study was to investigate microbiological contamination levels in the manufacturing company of ginseng products (white and red ginseng). Firstly, the contamination level for ginseng and each stage ginseng were 1.8~4.9 log CFU/g (total bacteria), 1.2~3.0 log CFU/g (coliform), 0.8~4.1 log CFU/g (fungi). However, only Bacillus cereus among pathogenic bacteria was detected from a few sample. The contamination of total bacteria tended to decrease as ginseng was being processing. Therefore, that of finished products (white and red ginseng) showed the lowest contamination level among each stage ginseng sample. That of fungi decreased steadily, although the contamination of fungi has tended to increase right after ginseng was steamed. Secondly, the contamination level for working tools and facilities were $1.7{\sim}4.7log\;CFU/cm^2$ (total bacteria), $0.4{\sim}4.0log\;CFU/cm^2$ (coliform), $0.9{\sim}4.2log\;CFU/cm^2$ (fungi). Especially, washing and peeling machines were higher contamination level. Finally, the contamination level of worker who washed and steamed ginseng was higher than worker who shaped, sorted and stored ginseng. Also, Staphylococus aureus was detected at 0.2~0.7 log CFU/hand on some wokers' hands. These results showed proper heating condition (temperature and time) and tidy manufacturing facility are the most important to avoid developing any microbiological problem of Ginseng Products.

• Korean Journal of Food Science and Technology
• /
• v.28 no.6
• /
• pp.1071-1077
• /
• 1996

Quality changes in citron (Citrus junos) during storage were studied to investigate the efficiency, cooling properties and the washing and storage effects of hydrocooling method. As a result of plotting the nondimensionalized citron temperature versus cooling time, its cooling rate coefficient was shown to be $-0.012\;min^4{\sim}\;-0.017\;min^4\;(R^2=0.97{\sim}0.99)$ at center, and to be $-0.033\;min^4{\sim}\;0.075\;min^4\;(R^2=0.89{\sim}0.93)$ at surface. During storage, weight loss was more affected by storage temperature than by pretreatment condition and in reached $22{\sim}23%$ after 7 weeks at $15^{\circ}C\;and\;10{\sim}11%$ after 8 weeks at $5^{\circ}C$ in all samples. However, changes in moisture contents of hydrocooled citron were shown to be about $1{\sim}2%$ after 7 weeks while that of non-treated citron was about 3% after 1 week of storage at $5^{\circ}C$. And the change of pH, acidity and soluble solid content were not significantly different between each treatments during storage $5^{\circ}C\;and\;15^{\circ}C$. Changes in Hunter L, a, and b values of hydrocooled citron were lower than those of non-treated one as the storage time increased. The respiration rate of hydrocooled citron during storage at $15^{\circ}C$ was $103.63\;mg{\cdot}CO_2/kg{\cdot}hr$, which is about 50% of that of non-treated citron.