• 제목/요약/키워드: Washing System

검색결과 487건 처리시간 0.027초

우레아제(Urease) 고정막에 의한 요소(Urea)의 가수분해 (Hydrolysis of Urea by Immobilized Urease Membrane)

  • 김병식;김민;허광범;홍주희;나원재;김재훈
    • 공업화학
    • /
    • 제18권1호
    • /
    • pp.10-16
    • /
    • 2007
  • 본 연구에서는 인체의 해로운 요소를 분해하고 분해 생성물인 암모니아($NH_3$)의 제거를 위한 우레아제 고정막 제조와 가수분해 특성에 관하여 검토되었다. 우레아제 고정막은 방사선 그라프트 중합법에 의해 다공성 중공사막에 음이온 교환기로서 DEA를 도입한 후 요소의 가수분해를 위해 우레아제를 고정시켜 제조하였다. 음이온 교환기가 도입된 막에 우레아제가 고정된 경우 그라프트율이 증가할수록 고정량이 증가하였다. 이것은 그라프트율이 증가할수록 그라프트 체인이 신장하여 단백질이 다층으로 고정되기 때문이다. 한편, 가교제의 첨가는 우레아제 고정막의 세척 과정에서 발생하는 탈리 현상을 억제할뿐 아니라 막의 반복사용도 가능하게 하였다. 5 h의 가교 반응을 통하여 탈리현상이 발생되지 않는 우레아제 고정막을 제조하였으며, 이때 제조된 우레아제 고정막은 1 mol과 4 mol의 요소 용액에서 각각 98%와 50% 이상의 가수분해 성능을 나타내었다.

집단급식소의 위생관리에 대한 실태 조사 (A Survey on the Sanitary Management in Food Service Institutions)

  • 소관순;김용석;신동화
    • 한국식품위생안전성학회지
    • /
    • 제22권1호
    • /
    • pp.63-75
    • /
    • 2007
  • 전라북도내 사업체, 병원, 학교, 사회복지시설 등 집단급식소 설치 신고를 한 집단급식소 98개 업소를 대상으로 설문조사를 실시하여 집단급식소의 위생관리 실태에 대하여 조사하였다. 식기 기구 및 용품의 소독 방법은 식기, 수저, 행주의 경우 열탕 소독이, 주방기기, 냉장고, 냉동고, 도마, 칼의 경우 소독제 방법이 많이 사용되었다. 위생복(34.4%), 위생모(34.4%), 냉장고(32.6%), 냉동고(31.8%)의 순으로 소독을 하지 않는 경우가 많았다. 위생교육 횟수는 월 1회가 56.1%로 가장 많았고, 월 2-3회 12.2%, 주 1회 11.3%순 이었다. 집단급식소의 일지 작성율은 해동일지(73.8%), 창고 및 화장실 점검일지(60.5%), 기구 등의 세척 및 살균 일지(54.5%),등의 순으로 많이 작성되었고, 조리장 위생관리 점검표(9.5%), 조리 종사자 위생점검 일지(10.8%), 위생교육 일지(8.4%) 등은 작성율이 낮았다. HACCP 제조 도입시 급식시설과 설비의 부족(54.1%)과 HACCP 제도에 대한 이해 부족(17.3%)이 주요 장애 요인이었다. 주방기기 및 기구 취급, 개인위생, 급 배수 시설 및 쓰레기 처리, 건물의 구조, 배치 및 시설관리에 대한 위생관리는 잘 이루어지고 있지 않았다. 집단급식소의 영양사들은 종사자의 개인위생과 급 배수 시설 및 쓰레기 처리에 대한 위생관리에 대해서는 잘 인식하고 있었으나 주방기기 및 기구 취급과 건물의 배치 및 시설의 위생 관리에 대해서는 인식이 부족하였다. 따라서 발생률이 계속 증가하는 식중독의 발생을 감소시키기 위해서는 위생관리 체계의 도입과 위생관리에 대한 영양사 인식의 전환이 필요하였다.

타액 오염이 One bottle 상아질 결합제의 전단결합강도에 미치는 영향에 관한 연구 (A STUDY ON THE EFFECT OF SALIVA CONTAMINATION ON THE BOND STRENGTH OF ONE-BOTTLE ADHESIVE SYSTEM)

  • 전형준;김종수;권순원
    • 대한소아치과학회지
    • /
    • 제28권4호
    • /
    • pp.566-574
    • /
    • 2001
  • 법랑질과 상아질에 대한 접착시스템의 결합력은 타액이나 혈액에 의하여 저하될 수 있다. 제 5세대 상아질 결합제 적용시에 산부식된 치면이 타액에 오염될 경우, 보다 효율적인 치면 처리 방법을 알아보기 위해 여러 가지 치면 처리 방법과 조건을 설정한 다음 수복물의 유지력을 전단결합강도 측정으로 서로 비교 분석하고, 치아와 수복물 사이의 계면을 주사전자 현미경을 이용해 관찰하였다. 그 결과 우치상아질의 산부식후 타액오염된 경우, 물로 10초간 세척한 후 공기로 가볍게 건조하여 수복하면 전단결합강도의 감소가 일어나지 않았으나, Prime & Bond NT의 광중합후에 타액오염된 경우에는 물로 10초간 세척한 후 공기로 완전히 건조를 하여도 레진과의 결합력이 매우 약해지며 Prime & Bond NT를 재적용하더라도 전단결합강도의 상당한 감소를 보였으며, 주사전자 현미경 관찰결과 모든 군에서 유사한 혼화층과 레진태그의 형성을 보였으며 특이할만한 각 군간의 차이를 관찰할 수 없었다.

  • PDF

선박용 대기오염장치 폐세정수 내 질산염의 선택적 제거를 위한 이온교환수지 공정 성능 평가 (Selective Nitrate Removal Performance Analysis of Ion Exchange Resin in Shipboard Waste Washwater by Air Pollution Prevention Facility)

  • 김봉철;여인설;박찬규
    • 대한토목학회논문집
    • /
    • 제41권4호
    • /
    • pp.399-404
    • /
    • 2021
  • 2020년 1월 1일부터 국제해사기구(International Maritime Organization, IMO)는 선박 대기오염 규제를 지속적으로 강화하고 있으며, 배출 규제해역이 아닌 일반해역을 운항하는 전 세계 모든 적용대상 선박에 대하여 황함유량 0.5 %를 초과하지 않는 연료유를 사용하거나 이에 준하는 대기오염 배출기준을 만족하도록 결정하였다. 최근 습식 스크러버를 통한 본 규정의 대기오염 배출기준을 만족시키려는 연구가 진행되고 있으나, 이 기술은 폐세정수를 동시에 유발하는 문제점이 있다. 본 연구에서는 국제해사기구의 폐세정수 배출 기준을 준수하기 위한 이온교환수지 공정의 성능을 평가하였다. 모사폐세정수를 사용하여 실험실 규모의 회분식 및 연속식 실험을 진행하였다. 실험 결과 모사폐세정수의 높은 총용존고형물에도 불구하고 이온교환수지 특성에 따라 선택적으로 질산염의 제거가 효율적으로 이루어짐을 확인하였다. 추가적으로 다양한 운영조건을 최적화함에 따라서 제거 효율을 개선할 수 있었으며, 이를 통하여 국제해사기구의 폐세정수 배출수 수질 기준을 만족할 수 있을 것으로 판단된다.

수면 무호흡증 관리를 위한 섬유센서 기반의 슬립 모니터링 스마트 웨어 개발에 관한 연구 (A Study on the Development of Sleep Monitoring Smart Wear based on Fiber Sensor for the Management of Sleep Apnea)

  • 박진희;김주용
    • 감성과학
    • /
    • 제22권1호
    • /
    • pp.89-100
    • /
    • 2019
  • 본 연구에서는 수면무호흡증이 다양한 합병증을 유발하는 질병으로서, 이를 위한 표준화된 수면다원검사가 고가이며 측정이 불편함을 고려하여, 환자가 익숙한 환경에서 검사를 받을 수 있도록 스트레치 섬유센서를 이용한 무구속 상태의 웨어러블 모니터링 시스템을 개발하고자 한다. 또한, 의복과 일체화된 디자인으로 제품화하여 그 유용성을 제안하고자 한다. 성인 남성용 롱 슬리브 티셔츠 형태로 착용형 수면무호흡 모니터링 스마트 의류를 개발하여, 수면무호흡 진단 지표 중 섬유형 센서를 기반으로 측정하는 호흡수(breathing rate)측정용 섬유센서, 산소포화도(oxygen saturation), 호흡기류(airflow)를 실시간 측정하였다. 최적의 조합비 샘플 4가지를 통한 gauge factor를 측정한 결과, gauge factor 20.3을 확인하였고, 3회 숨을 크게 내쉴 때 호흡유량이 최대 2048ml였다. 산소포화도 69.45%로 최소 측정 가능 산소포화도 70% 정도의 결과를 나타내었다. 세탁 후 인장에 따른 센서 성능 평가 결과는 전체적으로 gauge factor 18 수준의 값으로, 세탁에 대한 내구성이 입증되었다. 본 연구를 통하여 수면무호흡증 환자의 수면효율이 떨어지고 여러 합병증을 동반하는 문제에 대해, 가정에서 쉽게 사용할 수 있는 착용형 수면무호흡 모니터링 스마트 의류를 개발하여 호흡수, 호흡유량, 산소포화도의 3가지 지표를 측정 가능함을 확인하였다.

선박 배출 오염물질 항만처리시스템 확보방안 연구 (Improving the Port-Reception-Facility System)

  • 하신영;국승기
    • 한국항해항만학회지
    • /
    • 제44권6호
    • /
    • pp.488-493
    • /
    • 2020
  • 본 연구에서는 IMO에서 권장하는 수준의 선박배출 오염물질 처리시스템을 확보하기위해 항만국 의무이행 요건 중 선박배출 폐기물 수용시설의 국내 운영실태를 파악하고 해외 선진 사례를 조사하여 III CODE를 중심으로 IMO 회원국감사내용을 분석하였다. IMO는 항만에 입항하는 선박이 배출하는 오염물질을 적절하게 처리하기 위해 항만오염물질저장시설의 설치 및 운영을 권고하고 있으며 IMO 회원국 감사 시 항만국 이행실태파악을 위해 오염물질저장시설 등록 및 운영현황을 확인하고 있다. 특히 최근 환경규제로 인해 선박에 추가로 탑재된 스크러버 등과 같은 기자재에서 배출되는 스크러버 세정수를 처리하기 위한 추가적인 시설을 요하기 때문에 각 항만별로 주요 입항선박의 선종에 따라 배출되는 폐기물을 수용할 수 있는 오염물질저장시설의 구축이 필요하다. 현재 우리나라 선박배출 폐기물은 항만으로부터 육상 폐기물처리장까지 이동시켜주는 역할밖에 수행되고 있지 않으며 항만에서 배출되는 폐기물의 양과 성상에 대해서도 항만별로 모니터링하고 있지 않고 있어 항만배출 폐기물의 특성에 따른 오염물질저장시설의 적정배치가 어려운 실정이다. 따라서 본 연구에서는 현재 유창청소업의 수거실적을 모니터링 하는 방법을 개선하여 항만별로 오염물질 배출현황 및 특성에 대해 파악할 수 있도록 하고 동시에 오염물질저장시설의 적절한 배치를 통해 IMO가 권고하고 있는 '선박에서 배출되는 오염물질의 적정처리'가 가능하여 입항선박에 원활한 서비스를 제공하도록 시스템화 한다면 향후 국제해사기구의 회원국감사 대응에 있어 유리할 것으로 판단된다.

HACCP제도를 활용한 피자 전문 패스트푸드 업체의 자체 위생관리기준 설정 - 샐러드를 중심으로 - (Application of HACCP System on Establishing Hygienic Standards in Pizza Specialty Restaurant - Focused on Salad Items -)

  • 이복희;김인호;허경숙;조경동
    • 대한가정학회지
    • /
    • 제41권10호
    • /
    • pp.101-116
    • /
    • 2003
  • The study was conducted to establish hygienic standards of salad items for pizza restaurant located in Seoul by applying HACCP system during the summer of 2000. The study measured temperature, time, pH, Aw and microbial assessments. The hygienic conditions of the kitchen and workers were on the average(1.21, 1.0 out of 3 pts.), but some improvement should be made: separate use of trash can and leftover disposal, separate use of knives and cutting boards, habits for hand washing and wearing hygienic gloves. For salad production, all procedures were peformed under food safety danger zone ($5{\~}60^{\circ}C$). The ingredients were mostly above pH 5.0 and high in Aw($0.94{\~}0.99$). Microbial assessments for salad production revealed that TPC($1.8{\times}10^3{\~}1.0{\times}10^{10}CFU/g$) and coliforms($1.5{\times}10{\~}5.2{\times}10^5 CFU/g$) exceeded the standards by Solberg et al.(TPC: $10^6CFU/g$, coliforms: $10^3CFU/g$). S. aureus was not detected but Salmonella was found in three food items(egg, macaroni and macaroni salad). Moreover, the workers' hands contained 3.1 104 CFU/g of TPC and 4.2 102 CFU/g of S. aureus requiring further remedy since it exceeded the safety standards suggested by Harrigan and McCance (500 CFU/g of TPC per $100cm^2$ and 10 CFU/g of coliforms per $100cm^2$). According to the critical control point(CCP) decision tree analysis, vegetable receiving, vegetable holding, mixing, display on coleslaw, macaroni draining, display on macaroni salad, egg peeling & cutting, apple cutting, and display on salad bar were determined as CCPs. From the findings it would be suggested that purchase of Quality materials, short holding and display time, storing food at right temperature, using sanitary cooking utensils, and improvement of workers' food handing practices are needed to ensure the safe salad production in this specific pizza restaurant.

R-D & HDDR Process에 의한 Nd-Fe-B계 희토류 이방성 본드자석재료의 제조에 관한 기초연구 (I) (Basic Study on the Production of Nd-Fe-B System Rare Earth Anisotropic bonded Magnet Materials by the R-D & HDDR Process(I))

  • 조선미;손창빈;조통래
    • 한국재료학회지
    • /
    • 제11권7호
    • /
    • pp.609-614
    • /
    • 2001
  • 본 연구는 R-B & HDDR process를 적용해서 Nd-Fe-B계 회토류 이방성 본드자석의 제조를 위한 기초 데이터를 확보할 목적으로. 환원확산법을 사용해서 Nd-Fe-B계 자석합금분말을 제조하는 데 필요한 금속 Ca에 의한 Nd$_2$O$_3$의 환원반응과 Fe-B합금분말중에서의 Nd확산반응을 조사하였다. 그 결과 Nd$_2$O$_3$의 환원시 필요한 최적의 Ca첨가량은 100$0^{\circ}C$에서 1h동안 R-D 반응후 Nd 및 B원소의 수율관계로부터 이론당량의 1.3배정도가 적량인 것으로 나타났다. 또한 Fe-B합금분말중에 Nd의 확산과 관련된 XRD의 분석결과에 따라 완전한 균질화를 위해서는 110$0^{\circ}C$에서 45min정도의 R-D반응이 필요하였으며, R-D반응에 대한 Nd의 수율도 그 조건에서 최대로 얻어졌다. 그리고 수세후의 최종 분말시료중에 잔류하는 Ca 및 $O_2$량을 ICP발광분석 및 산소분석기에 의해 분석한 결과, 각각의 함유량은 0.17 및 0.42wt%정도가 검출되었다

  • PDF

Analysis of influential factors on respiratory symptoms of nail shop workers

  • Kim, Jung-ae;Kim, Su-min
    • International Journal of Advanced Culture Technology
    • /
    • 제5권3호
    • /
    • pp.24-34
    • /
    • 2017
  • Nail art is a kind of nail painting or decoration that adds to the beauty. Throughout making nail art, the worker was on a dusty operation with the smoothing of chemicals and nails. People working at nail shops not only use a variety of chemicals, but also experience a lot of fine powder during the process of nail trimmings. While drying the chemical adhesive, the workers often complain of eye, nose and throat discomfort. In addition, the acrylic brush is characterized by a lot of smell when washed with washing solution. Also nail art workers directly influence the worker's breathing through the work done by placing the guest's hands in a work space called a nail table. Chemical ingredients used in nail art procedures include acetone, ethyl acetic acid, toluene, butyl acetic acid, glue, and top coating of nail varnishes. Prolonged inhalation of these substances may cause dizziness, vomiting, as well as impaired respiratory system. The purpose of this study is to investigate the respiratory symptoms of nail shop workers who are likely to be affected by work in nail shop and to find out which factors have the greatest influence if they have respiratory symptoms. Therefore this study is to provide basic data on the health management system of people engaged in nail shop and to develop health education program. For this study, the data collection was collected on July 7, 2017 for the nail shop workers attending the nail art trend seminar held in Gwangju, in Korea. The data were all 236. However, except for the poor data, 208 data were used for the final analysis. The questionnaire consisted of 30 in general questions, questions about self-efficacy in 24 questions. elf-efficacy measuring tool developed by A.Y, Kim, I. Y, Park(2001). The self-efficacy questionnaire consists of 24 items and is self-reported 7-point Likert scale. The reliability of this tool was cronbach alpha = .934.The collected data were analyzed using spss 18.0. Information of Research participant performed frequency analysis. To examine the effects of personal characteristics on self-efficacy, $X^2$ analysis was conducted. And also $X^2$ analysis was conducted to analyze the coughing symptom appearance according to individual and environmental factors. A hierarchical regression analysis was used to determine which of the personal and environmental factors influenced cough symptoms.

우리나라 제조업체의 교대작업실태와 교대작업여부에 따른 상병결근 및 이직에 관한 연구 (Shiftwork and Sickness Absence in Korean Manufacturing Industries)

  • 박정선;백도명;이기범;이경용;이관형
    • Journal of Preventive Medicine and Public Health
    • /
    • 제27권3호
    • /
    • pp.475-486
    • /
    • 1994
  • In order to provide necessary information for better health of workers through understanding the actual status of the industries adopting shift systems. The data were gathered from a stratified random sample of 347 (0.5%) firms selected out of about 70,000 manufacturing industries throughout the nation in 1993. Stratification during sampling was by industrial group and number of workers. The major findings obtained from 288 firms surveyed completely were as follows : 1. About 20.2% of the 288 firms were adopting shift systems and shirtworkers accounted for about 25.1% of the total work force in 288 firms. 2. The bigger number of workers was, the higher the adopting rate of shift system was. 3. The rate of having welfare facilities such as dining room, commuting bus, washing facilities, and health care room etc. was higher in the industries adopting shift systems. 4. The major industrial groups adopting shift systems were the rubber a: plastic goods manufacturing industry (54.1 per 100 firms) and the textile manufacturing industry (44.8 per 100 firms). However, the proportion of shiftworkers was higher in the textile manufacturing industry (70.5 per 100 firms) and the electronics industry (57.9 per 100 frms). 5. The most predominant work schedule was the weekly rotating, semi-continuos 2-crew 2-shift system (47.5%). 6. In the industries adopting shift systems, shiftworkers had an adjusted average of 0.29 spells per 100 workers ($0.14{\sim}0.45$ in 95% C.I.) compared to 0.23 spells per 100 nonshift dayworkers ($0.15{\sim}0.31$ in 95% C.I.) for 1 month. 7. Also, in the industries adopting shift systems, the adjusted average annuel turn-over rate of shiftworkers was 13.07 per 100 workers ($12.03{\sim}14.12$ in 95% C.I.) compared to 10.18 per 100 nonshift dayworkers ($9.53{\sim}10.82$ in 95% C.I.).

  • PDF