• Applied Chemistry for Engineering
• /
• v.18 no.1
• /
• pp.10-16
• /
• 2007

In this study, we examined the preparation and hydrolysis property of immobilized urease membrane to decompose harmful urea in the body and remove ammonia which was produced by its decomposition. Urease immobilized membrane was prepared by introducing anion-exchange group DEA into porous hollow-fiber membrane by radiation graft polymerization method, and immobilization of urease. When urease was immobilized at membrane introduced with anion-exchange group, the more increasing grafting rate, the more increasing immobilization amount. The result originates from the fact that a greater amount of protein was immobilized by forming a multilayer on the longer grafted chain. Meanwhile, the addition of the cross-linker was possible not only to suppress separation phenomenon produced during a washing process of immobilized urease membrane but also to enable the recycling of membrane. Urease Immobilized membrane with no separation phenomenon was prepared by cross-linking reaction for 5 h, and the hydrolysis rate of prepared urease immobilized membrane was over 98% and 50%, respectively, in 1 mol and 4 mol urea solutions.

• Journal of Food Hygiene and Safety
• /
• v.22 no.1
• /
• pp.63-75
• /
• 2007

A survey on sanitary management at 98 food service institutions located in Jeollabuk-Do were conducted. Food service institutions included 13 hospitals, 38 schools, 40 enterprises, and 7 others. The sterilization in boiling water was used for disinfection of tableware, spoon and chopsticks, and dish towel. Cooking kit, refrigerator, chopping board, and knife were sterilized with disinfectant. Frequency of sanitary training program on employees was 56.1% for 1 time/month, 12.2% for 2-3 times/month, and 11.3% for 1 time/week. Preparing ratio of defrosting, warehouse and rest room, and washing and sterilization diary were 73.8, 60.5, and 54.5%, respectively. However, checking ratio of environments (9.5%), personal sanitation (10.8%), and sanitary training program diary(8.4%) were low. Major obstacle factors on the introduction of Hazard analysis critical control point (HACCP) system into food service institutions were lack of equipment and facilities (54.1%) and lack of understanding and data on HACCP system (17.3%). Therefore, in order to reduce the outbreak of food-borne diseases increasing frequency, we estimated that the introduction of sanitary management system and the conversion of dietician' perception on sanitary managements in food service institutions were needed.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.4
• /
• pp.566-574
• /
• 2001

For decades it has been a clinically accepted requirement, in case of salivary contamination, to re-etch conditioned enamel and dentin to proceed with the adhesive technique. Only a few reports have been so far dealing with the potential of one-bottle adhesive system to bond even when applied after salivary contamination and without re-etching. The purpose of this study was to evaluate the influence of the salivary contamination on the shear bond strength of dentin. The results were as follows: 1. In group II, in which saliva contamination and washing occurred before applying of Prime & Bond NT showed high shear bond strength as in control group. In Group III and IV, in which the cured adhesive was contaminated with saliva, showed significantly lower mean bond strength, 2. Relating long resin tags of $70\sim120{\mu}m$ were observed in samples of all groups under SEM. We could observed hybrid layer, resin tag and many lateral branches in every group. And there were no differences between groups.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.4
• /
• pp.399-404
• /
• 2021

From 1 January 2020, the limit for Sulphur in fuel oil used on board ships operating outside designated emission control areas will be reduced to 0.5 %. This regulation by international maritime organization (IMO) is able to significantly reduce the amount of Sulphur oxides (SOx) discharging from ships and should have environmental advantages and health for all over the world. To meet the regulation, in these days, wet scrubber system is being actively developed. However, this process leads to make washing wastewater. In this study, we evaluated ion exchange resin system in accordance with scrubber wastewater discharge regulation by IMO. Theoretical wastewater used as feed solution of lab scale water treatment systems. The results revealed that nitrate ion was removed selectively in spite of high TDS wash wastewater solution depending on ion exchange resin property. Moreover, it was possible to improve efficiency of the system by optimizing operating conditions.

• Science of Emotion and Sensibility
• /
• v.22 no.1
• /
• pp.89-100
• /
• 2019

Sleep apnea, a medical condition associated with a variety of complications, is generally monitored by standard sleep polysomnography, which is expensive and uncomfortable. To overcome these limitations, this study proposes an unconstrained wearable monitoring system with stretch-fiber sensors that integrate with the wearer's clothing. The system allows patients to undergo examinations in a familiar environment while minimizing the occurrence of skin allergies caused by adhesive tools. As smart clothing for adult males with sleep apnea, long-sleeved T-shirts embedding fibrous sensors were developed, enabling real-time monitoring of the patients' breathing rate, oxygen saturation, and airflow as sleep apnea diagnostic indicators. The gauge factor was measured as 20.3 in sample 4. The maximum breathing intake, measured during three large breaths, was 2048 ml. the oxygen saturation was measured before and during breath-holding. The oxygen saturation change was 69.45%, showing a minimum measurable oxygen saturation of 70%. After washing the garment, the gauge factor reduced only to 18.0, confirming the durability of the proposed system. The wearable sleep apnea monitoring smart clothes are readily available in the home and can measure three indicators of sleep apnea: respiration rate, breathing flow and oxygen saturation.

• Journal of Navigation and Port Research
• /
• v.44 no.6
• /
• pp.488-493
• /
• 2020

In this study, we sought to establish a vessel-discharge pollutant-treatment system recommended by IMO by first investigating advanced facilities overseas to help us understand and evaluate our domestic facility and needs. IMO recommends the installation and operation of port pollutant-storage facilities to adequately treat pollutants emitted by ships entering the port, and we reviewed the registration and operation of these facilities in IMO member countries, focusing on the IIII Code. Due to recent environmental regulations, additional facilities are required to treat the washing water discharged from equipment such as scrubbers mounted on the ship so pollutant-storage facilities must be established. Currently, Korea's ship-discharged wastes are being moved from ports to land waste-treatment plants, and their quantity and properties are not being monitored. Therefore, in this study, we improved monitoring of the discharged pollutants and investigated the proper arrangement of pollutant storage facilities as recommended by IMO. The system we established can help provide smooth service to incoming ships - and appropriate treatment of pollutants and will greatly benefit international maritime operations.

• Journal of the Korean Home Economics Association
• /
• v.41 no.10 s.188
• /
• pp.101-116
• /
• 2003

The study was conducted to establish hygienic standards of salad items for pizza restaurant located in Seoul by applying HACCP system during the summer of 2000. The study measured temperature, time, pH, Aw and microbial assessments. The hygienic conditions of the kitchen and workers were on the average(1.21, 1.0 out of 3 pts.), but some improvement should be made: separate use of trash can and leftover disposal, separate use of knives and cutting boards, habits for hand washing and wearing hygienic gloves. For salad production, all procedures were peformed under food safety danger zone ($5{\~}60^{\circ}C$). The ingredients were mostly above pH 5.0 and high in Aw($0.94{\~}0.99$). Microbial assessments for salad production revealed that TPC($1.8{\times}10^3{\~}1.0{\times}10^{10}CFU/g$) and coliforms($1.5{\times}10{\~}5.2{\times}10^5 CFU/g$) exceeded the standards by Solberg et al.(TPC: $10^6CFU/g$, coliforms: $10^3CFU/g$). S. aureus was not detected but Salmonella was found in three food items(egg, macaroni and macaroni salad). Moreover, the workers' hands contained 3.1 104 CFU/g of TPC and 4.2 102 CFU/g of S. aureus requiring further remedy since it exceeded the safety standards suggested by Harrigan and McCance (500 CFU/g of TPC per $100cm^2$ and 10 CFU/g of coliforms per $100cm^2$). According to the critical control point(CCP) decision tree analysis, vegetable receiving, vegetable holding, mixing, display on coleslaw, macaroni draining, display on macaroni salad, egg peeling & cutting, apple cutting, and display on salad bar were determined as CCPs. From the findings it would be suggested that purchase of Quality materials, short holding and display time, storing food at right temperature, using sanitary cooking utensils, and improvement of workers' food handing practices are needed to ensure the safe salad production in this specific pizza restaurant.

• Korean Journal of Materials Research
• /
• v.11 no.7
• /
• pp.609-614
• /
• 2001

This study was carried out to obtain a basic data on the production of the Nd-Fe-B system rare earth anisotropic bonded magnet by R-D & HDDR process. The reduction reaction of Nd$_2$O$_3$by metallic Ca and the diffusion reaction of Nd into Fe-B alloy powder were investigated for the production the Nd-Fe-B alloy powder. We concluded that a proper quantity of metallic Ca was about 1.3 times of theoretical equivalent from the yields of Nd and B after the R-D reaction at 100$0^{\circ}C$ for 1h. In the XRD analysis the diffusion reaction of Nd into the center of Fe-B alloy powder for the completed homogenization was required through about 45min at 110$0^{\circ}C$ for the R-D reaction, and also the maximum efficiency on the yield of Nd was obtained with such a condition. Residual Ca and oxygen contents of the final powder sample after washing were detected in 0.17wt% and 0.42wt% by ICP and oxygen analyzer, respectively.

• International Journal of Advanced Culture Technology
• /
• v.5 no.3
• /
• pp.24-34
• /
• 2017

Nail art is a kind of nail painting or decoration that adds to the beauty. Throughout making nail art, the worker was on a dusty operation with the smoothing of chemicals and nails. People working at nail shops not only use a variety of chemicals, but also experience a lot of fine powder during the process of nail trimmings. While drying the chemical adhesive, the workers often complain of eye, nose and throat discomfort. In addition, the acrylic brush is characterized by a lot of smell when washed with washing solution. Also nail art workers directly influence the worker's breathing through the work done by placing the guest's hands in a work space called a nail table. Chemical ingredients used in nail art procedures include acetone, ethyl acetic acid, toluene, butyl acetic acid, glue, and top coating of nail varnishes. Prolonged inhalation of these substances may cause dizziness, vomiting, as well as impaired respiratory system. The purpose of this study is to investigate the respiratory symptoms of nail shop workers who are likely to be affected by work in nail shop and to find out which factors have the greatest influence if they have respiratory symptoms. Therefore this study is to provide basic data on the health management system of people engaged in nail shop and to develop health education program. For this study, the data collection was collected on July 7, 2017 for the nail shop workers attending the nail art trend seminar held in Gwangju, in Korea. The data were all 236. However, except for the poor data, 208 data were used for the final analysis. The questionnaire consisted of 30 in general questions, questions about self-efficacy in 24 questions. elf-efficacy measuring tool developed by A.Y, Kim, I. Y, Park(2001). The self-efficacy questionnaire consists of 24 items and is self-reported 7-point Likert scale. The reliability of this tool was cronbach alpha = .934.The collected data were analyzed using spss 18.0. Information of Research participant performed frequency analysis. To examine the effects of personal characteristics on self-efficacy, $X^2$ analysis was conducted. And also $X^2$ analysis was conducted to analyze the coughing symptom appearance according to individual and environmental factors. A hierarchical regression analysis was used to determine which of the personal and environmental factors influenced cough symptoms.

• Journal of Preventive Medicine and Public Health
• /
• v.27 no.3 s.47
• /
• pp.475-486
• /
• 1994

In order to provide necessary information for better health of workers through understanding the actual status of the industries adopting shift systems. The data were gathered from a stratified random sample of 347 (0.5%) firms selected out of about 70,000 manufacturing industries throughout the nation in 1993. Stratification during sampling was by industrial group and number of workers. The major findings obtained from 288 firms surveyed completely were as follows : 1. About 20.2% of the 288 firms were adopting shift systems and shirtworkers accounted for about 25.1% of the total work force in 288 firms. 2. The bigger number of workers was, the higher the adopting rate of shift system was. 3. The rate of having welfare facilities such as dining room, commuting bus, washing facilities, and health care room etc. was higher in the industries adopting shift systems. 4. The major industrial groups adopting shift systems were the rubber a: plastic goods manufacturing industry (54.1 per 100 firms) and the textile manufacturing industry (44.8 per 100 firms). However, the proportion of shiftworkers was higher in the textile manufacturing industry (70.5 per 100 firms) and the electronics industry (57.9 per 100 frms). 5. The most predominant work schedule was the weekly rotating, semi-continuos 2-crew 2-shift system (47.5%). 6. In the industries adopting shift systems, shiftworkers had an adjusted average of 0.29 spells per 100 workers ($0.14{\sim}0.45$ in 95% C.I.) compared to 0.23 spells per 100 nonshift dayworkers ($0.15{\sim}0.31$ in 95% C.I.) for 1 month. 7. Also, in the industries adopting shift systems, the adjusted average annuel turn-over rate of shiftworkers was 13.07 per 100 workers ($12.03{\sim}14.12$ in 95% C.I.) compared to 10.18 per 100 nonshift dayworkers ($9.53{\sim}10.82$ in 95% C.I.).